Is Fuel Injector Cleaning Useful?

2 Answers
DelBethany
09/06/25 5:24am
Fuel injector cleaning is useful. If the fuel injector is not cleaned for a long time, carbon deposits can accumulate around the injector nozzle, and in severe cases, the nozzle may even become clogged, resulting in poor fuel atomization and inadequate mixing of gasoline and air. The fuel injector itself is a normally closed valve. When the electromagnetic coil is energized, it generates suction, lifting the needle valve and opening the nozzle, allowing fuel to be sprayed at high speed through the annular gap between the needle valve head and the nozzle. The fuel injector operates by the up-and-down movement of a valve needle to control the opening and closing of the valve. When the ECU issues a fuel injection command, its voltage signal causes current to flow through the coil inside the injector, opening the valve to allow fuel to be sprayed from the injector nozzle.
Was this review help?
6
4
Share
SaraAnn
09/18/25 5:13am
I think fuel injector cleaning is quite effective, especially when doing it yourself. Last time my car felt particularly sluggish, with weak acceleration, and the fuel consumption increased from 8L/100km to 10L/100km. After some research, I figured it was likely due to carbon buildup in the fuel injectors, causing poor fuel spray and affecting engine performance. I went and bought a bottle of fuel injector cleaner, added it to the fuel tank, filled up with gas, and took it for a spin on the highway. After that, a miracle happened: the engine ran smoother, the throttle response was immediate, and the fuel consumption dropped back to around 8.5L/100km. This method is super cost-effective, costing just a few tens of yuan, much cheaper than going to a repair shop. In the long run, it can also prevent issues like idle vibration and excessive emissions. I recommend doing it every 10,000 to 20,000 kilometers to keep the car in good condition and reduce repair costs.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What are the causes of low oil pressure in a diesel engine?

Diesel engine oil pressure is too low due to: 1. Insufficient oil output from the oil pump leading to a drop in oil pressure; 2. Clogged oil filter causing a decrease in oil pressure; 3. Damaged return valve resulting in reduced oil pressure; 4. Oil leakage from the oil cooler leading to a drop in oil pressure; 5. Excessive clearance between the crankshaft and bearing shells causing low oil pressure; 6. Clogged oil suction screen resulting in fluctuating oil pressure. A diesel engine, also known as a Diesel engine, is an engine that burns diesel fuel to obtain energy release. Its main structural components include the engine block, crankshaft and connecting rod mechanism, valve train, fuel system, lubrication system, cooling system, and electrical system.
5
2
Share

Where is the Ford Territory engine produced?

The Ford Territory engine is domestically produced in China, with the model number JX4G15C5L. The engine has a maximum horsepower of 140Ps, maximum power of 103kW, and maximum torque of 225Nm. Exterior-wise, the Ford Territory features a floating roof design with black B-pillars, D-pillars, and C-pillars, along with a rising waistline that extends from the front to the rear of the vehicle. For the interior, the Ford Territory is equipped with a large panoramic sunroof and boasts NVH performance. The Ford Territory is a versatile midsize SUV designed for modern families, with dimensions of 4580mm in length, 1936mm in width, and 1674mm in height, and a wheelbase of 2716mm.
20
2
Share

Can You Turn Right When There's Only a Straight Arrow on the Ground?

Can you turn right when there's only a straight arrow on the ground? If the ground markings on the motor vehicle lane allow a right turn (when there is no right-turn traffic signal), the following factors need to be considered: 1. When the parallel opposite left-turn traffic flow is not saturated and does not affect the left-turn traffic, right-turning vehicles do not have priority exemption but are allowed to turn right; 2. When the parallel opposite left-turn traffic flow is saturated, right-turning vehicles do not have priority exemption; 3. When only left-turn traffic is moving in the perpendicular direction, right-turning vehicles have priority exemption; 4. When only straight-moving traffic is moving in the parallel same direction, right-turning vehicles have priority exemption; 5. When only straight-moving traffic is moving in the perpendicular direction, right-turning vehicles do not have priority exemption; 6. If there is a traffic officer directing traffic, then follow the officer's hand signals to turn right.
13
3
Share

What does it mean when the TC light in a car is on?

When the TC light in a car is on, it indicates that the traction control system is turned off. The traction control system is computer-controlled and uses the computer to monitor the speed of all four tires and the steering angle of the wheel in real-time. Its purpose is to ensure that the vehicle obtains optimal traction under various road conditions, thereby guaranteeing the safety of the car and its occupants. The control device of the car's traction control system is a computer, which monitors the speed of the four wheels and the steering angle of the wheel. When the car accelerates, if the computer detects a significant difference in speed between the driving wheels and non-driving wheels, it immediately determines that the driving force is excessive and sends a signal to reduce the fuel supply to the engine, thereby decreasing the driving force and reducing the slip rate of the driving wheels.
5
1
Share

How to Adjust the Time on the New Sylphy?

The steps to adjust the time on the new Sylphy are: 1. Power on the vehicle, there is a button on the lower left and lower right corners of the instrument panel, press the left button once; 2. The left button is the selection button, press it once to adjust the hour; 3. Press the right button on the instrument panel once, the right button is the adjustment button, press it once to increase a value; 4. Press the left button on the instrument panel twice to adjust the minutes. The new Sylphy has a length, width, and height of 4641mm, 1815mm, and 1450mm respectively, a wheelbase of 2712mm, a front track of 1588mm, a rear track of 1594mm, and a fuel tank capacity of 47L. The engine equipped in this vehicle has a maximum horsepower of 122Ps, a maximum power of 90kW, and a maximum torque of 155Nm.
5
1
Share

What is the tire pressure display for the Chery Anteq eq1?

The normal tire pressure range for the Chery Anteq eq1 is between 2.4 and 2.8 bar. In winter, it is advisable to increase the pressure by 0.2 bar, and in summer, reduce it by 0.1 bar to prevent tire blowouts. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance, making the tires more susceptible to damage from sharp objects like nails or glass, leading to internal cracks and blowouts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Makes the steering wheel heavy and prone to deviation, compromising driving safety; Increases movement of tire components, causing excessive heat due to over-flexing; Weakens the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage and abnormal wear; Multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength, which can cause blowouts at high speeds; Increases tire deformation, leading to sidewall cracks and excessive heat from flexing, accelerating rubber aging, cord fatigue, and tread shoulder wear.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.