Is Fuel Additive Absolutely Necessary for Engines?

1 Answers
OJudah
07/25/25 2:51pm
Yes, fuel additives are highly effective for cleaning the fuel system. The additives in fuel cleaners can remove deposited gums and impurities from the fuel lines. Introduction to Fuel Additives: Fuel additive is a common term for the third generation of gasoline detergents. It can address carbon deposit issues in the fuel injection system of vehicles, quickly restore the engine to optimal performance, and compensate for certain deficiencies in gasoline while imparting new beneficial properties. Purchase from Authorized Channels: Fuel additives are high-tech products with significant entry barriers, resulting in higher costs and unit prices. Consequently, the market is flooded with numerous low-quality and even counterfeit products. Using fake products not only fails to clean carbon deposits or maintain the engine but may also cause damage. Therefore, it is essential to purchase from authorized channels.
Was this review help?
16
4
Share
More Forum Discussions

What is the Difference Between Automatic and Manual Air Conditioning in Cars?

The differences between automatic and manual air conditioning in cars are: 1. Different functions: Automatic air conditioning can adjust the temperature to the set value based on the driver's input; manual air conditioning can only regulate cold or warm air but cannot precisely control the temperature. 2. Different operations: Automatic air conditioning only requires setting the desired temperature, and it will automatically maintain the stable temperature inside the car; manual air conditioning requires manual adjustment of the fan speed. 3. Different fuel consumption: Automatic air conditioning can automatically adjust the temperature. When the temperature reaches the set value, the compressor can pause or reduce its output power, and it will restart when the temperature rises to maintain the set temperature; the compressor of manual air conditioning operates at a constant power, which consumes more engine fuel.
8
3
Share

What does the L gear in an automatic transmission car mean?

The L gear in an automatic transmission car stands for Low gear, which is the same as the numerical "1" gear, both designed to keep the transmission in the lowest gear to provide high torque without upshifting. Common gears in an automatic transmission include: P (Park), R (Reverse), N (Neutral), D (Drive), and S (Sport mode). An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Driving an automatic car using just the P, R, N, and D gears can fully meet the needs of general driving. However, in some special driving environments, other functional gears may be required.
13
4
Share

How to Start and Park an Automatic Transmission Car?

Steps for starting and parking an automatic transmission car: 1. After sitting in the driver's seat, the driver does not need to press the brake pedal. Simply press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check (for models with one-key start); 2. Ensure the handbrake is engaged and the gear is in P or neutral. Press the brake pedal and press the start button again to ignite and start the engine; 3. Release the foot brake and optionally warm up the car for 1 to 3 minutes. Monitor the water temperature gauge on the dashboard—when the pointer reaches 90 degrees, the warm-up is complete; 4. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly) to complete the starting process; 5. Release the accelerator, press the brake pedal to bring the vehicle to a smooth stop; 6. Shift the gear from D to N; 7. Engage the handbrake (for electronic handbrakes, pull up the button); 8. Release the foot brake but do not turn off the power; 9. Continue pressing the foot brake and shift the gear from N to P; 10. Release the foot brake and press the start button to turn off the power, completing the parking process.
12
2
Share

What are the operating steps for replacing brake fluid?

Operating steps for replacing brake fluid: 1. Place the vehicle on an inspection pit or lift it with a jack, have one person underneath the vehicle, remove the rubber dust cap from the drain port, and connect both ends of a prepared transparent hose to the drain port and the waste oil collection bottle respectively; 2. Use a wrench to loosen the drain port screw counterclockwise, while the person in the vehicle repeatedly presses the brake pedal; 3. At this point, brake fluid will spray out from the drain port. Pay attention to the fluid level in the brake fluid reservoir and add new brake fluid as the level drops; 4. Once the discharged fluid becomes clear, tighten the drain port screw; 5. The person in the vehicle repeatedly presses the brake pedal to its highest point and holds it down without releasing, while the person underneath loosens the drain port screw. After all the brake fluid is discharged, tighten the screw and notify the person in the vehicle to release the pedal. Repeat this operation several times until no bubbles are present in the discharged brake fluid; 6. Continue to add new brake fluid to the reservoir as the level drops, then have another person repeat steps 1 to 3 above.
6
0
Share

Can I Replace Just One Car Tire?

If the tread wear on the car tire is still relatively shallow, it is acceptable to replace just one tire, as the wear on tires on the same axle is generally similar. However, it is essential to ensure that the tires on the same axle have consistent tread patterns, structure, brand, and specifications. If the tire tread wear is severe—for example, if the tires have been driven tens of thousands of kilometers but do not yet require replacement, and only one tire has an issue—replacing just one tire can significantly impact driving safety. This may lead to vehicle drift or even loss of control. The reason is that when a tire is heavily worn, the new tire will have greater friction and grip compared to the old one. The old tire, with weaker grip, can cause the vehicle to drift or lose control due to the imbalance in traction. Additionally, the vehicle may experience uneven height, leading to bumpiness or drift issues at higher speeds. Therefore, in such cases, it is best to replace a pair of tires.
19
3
Share

How to Properly Adjust Car Rearview Mirrors?

Correct methods for adjusting car rearview mirrors: 1. For the left side mirror, when adjusting vertical position, place the distant horizon at the center; for horizontal position, adjust until the car body occupies one quarter of the mirror surface. 2. For the right side mirror, position the horizon at two-thirds height of the mirror, then adjust the car's edge to occupy one quarter of the mirror image. 3. The interior rearview mirror should follow one principle: ensuring clear visibility through the rear window. For vertical space allocation, typically divide equally between sky and ground (about 50% each). Since the driver sits on the left side, it's harder to monitor the right side of the vehicle. Considering roadside parking needs, the right mirror should show more ground area when adjusting vertical position - about two-thirds of the mirror surface; horizontally, similarly adjust until the car body occupies one quarter of the mirror surface.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.