Is FAW-Volkswagen Jetta SUV a Joint Venture Vehicle?

2 Answers
LeVincent
07/24/25 7:30pm
FAW-Volkswagen Jetta SUV is a joint venture vehicle. The Jetta VS7 under FAW-Volkswagen Jetta brand is a mid-size SUV with dimensions of 4624mm in length, 1841mm in width, and 1644mm in height, with a wheelbase of 2730mm. The VS7 is equipped with a 1.4-liter turbocharged engine across all variants. This engine delivers a maximum power of 110kW and a peak torque of 250Nm, with maximum power achieved at 5000-6000 rpm and peak torque available between 1750-3000 rpm. The engine features DVVT technology, direct fuel injection, and an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
Was this review help?
20
4
Share
DiLuna
08/11/25 10:47am
I'm a seasoned car enthusiast and very familiar with joint-venture vehicles. The FAW-Volkswagen Jetta SUV absolutely qualifies as a joint-venture car, which stems from its corporate nature: FAW-Volkswagen is a company jointly established by China's FAW and Germany's Volkswagen, specializing in producing cars for the Chinese market. The Jetta brand was originally a sub-brand of Volkswagen before becoming independently operated, but SUV models like the VS5 and VS7 are still manufactured by FAW-Volkswagen under the joint-venture framework. These models are produced in domestic factories using Volkswagen's platform technology, but with more localized cost controls. The advantage of joint-venture cars lies in their fusion of foreign technology and Chinese market demands—offering higher safety standards, extensive maintenance networks, and more affordable prices compared to purely imported vehicles. As a car owner, I value this combination—enjoying German quality without spending a fortune. Overall, its joint-venture status is undeniable, and most buyers prioritize these benefits, driving with greater peace of mind.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What are the causes of steering gear failure in Audi A4?

Audi A4 steering gear failure reasons are as follows: Heavy steering failure causes: The power steering system contains a large amount of air, leading to abnormal car steering; Foreign objects in the steering hydraulic pipeline cause the steering pump flow control valve to stick; Loose connections in the power steering system result in steering fluid leakage; Excessive wear of the steering gear piston cylinder, poor oil seal sealing, or control valve sticking or damage. Abnormal noise during steering causes: Overloading of the steering system leads to excessive wear of the stator and rotor inside the steering pump, causing irregular movement of the oil in the pump and producing abnormal noise; Loose installation of the steering gear or pump on the bracket, internal wear of the steering gear, and improper adjustment of the gear and rack.
3
5
Share

What are the reasons for the Audi A3 high beam not working?

Audi A3 high beam not working reasons are as follows: Filament issue: One high beam not working is a filament problem. High beam fuse issue: Both high beams not working is a combination switch or high beam fuse problem. How to use high beams: Car high beams: Suitable for driving at night on roads without streetlights or poor lighting, can be used when driving on dimly lit national highways or freeways. Car low beams: Suitable for roads with oncoming traffic within 150 meters; when driving on the road, speed should be below 30 km/h when using low beams, and above 30 km/h when using high beams; pulling towards the driver temporarily flashes the high beam, releasing the switch automatically returns it to the low beam position, this is commonly used to alert vehicles in the opposite lane, i.e., alternating between low and high beams.
8
2
Share

Why can't the steering wheel of the Volkswagen Lavida turn?

The reasons why the steering wheel of the Volkswagen Lavida cannot turn are as follows: Locking mechanism failure: If the steering wheel locking device cannot be unlocked, it may be due to a malfunction in the locking mechanism or an issue with the vehicle's anti-theft system. The car needs to be towed to a 4S shop or repair shop for inspection and repair. Power steering system failure: If it can be unlocked, you can start the engine and try to turn the steering wheel. If the steering wheel still cannot be turned after starting the car, it may be due to a problem with the power steering system. Power steering pump belt failure: Common power steering systems include hydraulic steering and electric steering. For vehicles with hydraulic steering, it is necessary to check whether the power steering pump belt is normal and whether the power steering fluid is normal.
2
4
Share

How to Fold Down the Rear Seats in a 2014 Corolla?

Steps to fold down the rear seats in a 2014 Corolla: 1. Open the rear passenger-side door of the Corolla; 2. Open the trunk lid; 3. Pull the rear seat release switch; 4. Gently push the rear seatback forward to unlock it; 5. Adjust the headrest from inside the car to fully fold down the rear seats. The Corolla is a compact car produced by FAW Toyota, with dimensions of 4635 mm in length, 1780 mm in width, and 1455 mm in height, and a wheelbase of 2700 mm. The Corolla features front-wheel drive, with a MacPherson strut front suspension and a double-wishbone independent rear suspension.
7
4
Share

What is the reason for the delayed intake camshaft position in Haval H6?

The reasons for the delayed intake camshaft position in Haval H6 are as follows: Excessive timing gear backlash: There is a slight noise when the car is idling; the noise becomes obvious at medium speed; the noise becomes chaotic or disappears at high speed; the noise reappears during rapid acceleration, and in severe cases, the timing gear cover vibrates. This indicates excessive timing gear backlash. Insufficient timing gear backlash: After major repairs or replacement of the timing gear, there is a continuous noise, which becomes louder as the speed increases, and is particularly noticeable during rapid acceleration. This indicates insufficient timing gear backlash. Uneven timing gear meshing: A rhythmic noise can be heard at idle, which increases with the rise in speed. This indicates uneven timing gear meshing.
9
2
Share

What are the reasons for brake failure in the BMW iX3?

The causes of brake failure in the BMW iX3 are as follows: Brake system: The brake system lacks necessary maintenance, the brake pump has excessive impurities, poor sealing, vacuum power pump failure, brake fluid is too dirty or multiple types of brake fluid are mixed, leading to heat-resistant gas resistance, leakage in the brake pump or sub-pump, or air leakage in the air storage tank or pipeline interface. Severe overloading: Due to severe overloading, the vehicle's motion inertia increases under the effect of gravitational acceleration, directly leading to brake failure. Improper operation: Improper operation can cause mechanical failure, such as prolonged downhill driving causing the brake pads to overheat and the brake hubs to carbonize, resulting in complete brake failure.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.