Is Fast Charging Harmful to Vehicle Batteries?

1 Answers
Tina
07/29/25 11:40pm
There is certain damage. New energy vehicles represent the future trend of automotive development. However, constrained by the basic charging infrastructure and the range of pure electric vehicles, the sales of electric vehicles have not been high. Of course, major automakers are also working on technological iterations to increase the range of their electric models or improve charging methods. Both slow charging and fast charging can cause damage to the battery, so fast charging does harm the battery. Fast charging stations generally use high voltage and high current without pulse protection. While the short-term charging effect is noticeable, it causes significant damage to the battery plates, accelerating their sulfation and aging.
Was this review help?
19
2
Share
More Forum Discussions

Where is the USB port located in the Cadillac CT6?

The Cadillac CT6 is equipped with a USB port inside the center console for connecting a USB drive. Below is an introduction to the Cadillac CT6: 1. Overview: The Cadillac CT6 is a premium luxury sedan from the Cadillac brand, designed to succeed the market space of the Seville SLS. It made its global debut at the New York Auto Show in April 2015 and was launched in the North American market in 2016. 2. Dimensions: The Cadillac CT6 measures 5223/1879/1492mm in length, width, and height, with a wheelbase of 3109mm. 3. Powertrain: It is powered by a 2.0T engine, delivering a maximum power of 174kW (237 horsepower) and a peak torque of 350Nm.
1
5
Share

How to Coordinate the Brake and Clutch in a Car?

The coordination of the brake and clutch in a car is as follows: 1. When starting the car, first quickly release the clutch pedal to rapidly reduce the gap between the clutch pressure plate and the friction plate. Then slowly release the clutch pedal. When you feel the engine slightly vibrating, you have reached the clutch engagement point. At this point, slightly press the accelerator and continue to slowly release the clutch pedal. Once the clutch is fully engaged, quickly and completely release the clutch pedal. 2. When shifting gears while driving, operate the clutch pedal by quickly pressing it down and lifting it up. Avoid half-clutch engagement, as this will accelerate the wear of the clutch plates. 3. During normal driving, do not rest your left foot on the clutch pedal for extended periods, as this can lead to rapid wear of the clutch plates.
3
2
Share

Can alcohol be used for disinfection inside a car?

Alcohol can be used for disinfection inside a car. Different concentrations of alcohol serve different purposes. To achieve a disinfecting and sterilizing effect, you need to purchase medical alcohol with a concentration of 75%. Car owners should also pay attention to certain aspects when using alcohol for disinfection. Due to the high concentration of alcohol and its rapid evaporation, 75% ethanol disinfectant has a flash point of around 22°C, so it is important to maintain ventilation inside the car. Additional information: 1. It is best to use a towel dipped in alcohol to wipe the interior of the car instead of directly spraying alcohol inside, as this avoids excessive alcohol concentration in the air, which poses a fire risk. When wiping the interior of the car, remember to turn off the engine first and wait until the engine and interior equipment have stopped working before proceeding. 2. Since alcohol is an organic solvent, car owners with leather interiors should avoid wiping leather materials, as this can damage the interior. Additionally, chrome-plated and painted parts inside the car may fade due to alcohol corrosion, so car owners should also avoid wiping these areas when cleaning the interior.
4
2
Share

What does it mean when the ECO light appears on the car?

When the ECO indicator appears on the dashboard, it indicates that the vehicle's economy mode has been activated. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The ECO mode is further divided into active ECO driving mode and non-active ECO driving mode. ECO mode can be categorized into active and non-active types, with the difference being that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active ECO mode does not have a dedicated button; when the ECO indicator light on the dashboard turns on, it serves merely as a reminder. The ECO system will automatically evaluate your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles use the active ECO driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can activate the ECO mode. However, it is unnecessary to enable ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. In such scenarios, activating ECO mode would not only fail to demonstrate its fuel-saving characteristics but also negatively impact the vehicle's power performance. Additionally, the ECO mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the ECO mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and the ECO mode will not function in such cases.
7
5
Share

Where is the throttle position sensor located?

The throttle position sensor is installed on the throttle body. As the throttle opening changes and the throttle shaft rotates, it drives the sliding of the brush or the rotation of the guide cam inside the sensor, converting the throttle opening angle signal into an electrical signal sent to the ECU. Below are the adjustment steps for the throttle position sensor: 1. Use the DC voltage range of a multimeter to measure the voltage between the signal wire and the ground wire of the throttle position sensor. 2. With the throttle in the idle position, turn on the ignition switch and observe the reading on the multimeter. 3. If the throttle position sensor does not provide the specified voltage signal, loosen the fixing screw of the throttle position sensor and rotate the sensor housing until the voltmeter indicates the specified voltage signal. 4. Fix the throttle position sensor in the adjusted position.
10
4
Share

What is the emission standard of Dongfeng Fengguang S560?

Currently, the latest models of Dongfeng Fengguang S560 all meet the China VI emission standard, and models released after 2016 are at least China V compliant. In terms of appearance, the new car features a front bumper with an integrated horizontal design, combined with the upper and lower grille to create a shark-mouth-like imposing presence. The side profile continues the streamlined waistline design, highlighting a dynamic aesthetic. The vehicle dimensions are 4560/1815/1735mm (L/W/H) with a wheelbase of 2690mm. For powertrain, the 2.0L variant is equipped with Xiaokang's self-developed SFG20A engine, which will completely replace the existing 1.8L products. It delivers a maximum power of 105kW and peak torque of 200N·m, with a combined fuel consumption as low as 6.9L/100km. The 1.5T model features the SFG15TA engine producing 110kW and 220N·m, achieving 7.0L/100km combined fuel consumption.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.