Is Evaporator Cleaning Necessary?

How to Replace Windshield Wiper Blades?

To replace windshield wiper blades, follow these steps: 1. Lift the metal wiper arm away from the windshield and keep it perpendicular to the windshield for stability; 2. Press the tab to remove the old wiper blade; 3. Insert the new wiper blade and gently rotate the new wiper; 4. Hook the new blade into place to secure it, then return the wiper to the windshield. For wiper blade maintenance: 1. Always use windshield washer fluid when operating the wipers—never use them dry; 2. Avoid using wiper blades on stubborn or hard debris—clean manually instead; 3. When lifting wipers during car washing or routine cleaning, hold only the spine of the wiper arm.

15

5

Share

How to align with the shoulder line when reversing into a parking space?

First, adjust the seat, fasten the seat belt, and properly adjust the rearview mirrors after getting into the car. If the distance is less than 30cm, turn the steering wheel back half a turn to adjust. If it's much less than 30cm, you can turn back one full turn to adjust. When it equals 30cm, immediately turn the steering wheel all the way to the left. If the distance is greater than 30cm, continue turning the steering wheel all the way to the left. If the car body is straight but still more than 30cm away, next time, start turning earlier or increase the speed of turning the steering wheel.

18

0

Share

Can Overwritten Dash Cam Footage Be Recovered?

Overwritten dash cam footage cannot be recovered. Once new video overwrites the old, the system automatically deletes the previous recording. A dash cam is a device that records video and audio information during vehicle operation. Functions of dash cams: 1. Preserves crucial video evidence when accident scenes lack clear traces or get destroyed; 2. When connected to direct power supply, it can function as parking surveillance. Installation method: 1. Secure the dash cam to the rearview mirror using clips; 2. Connect the power cable to the cigarette lighter socket; 3. Route the wire along the right side of the glove compartment molding, tucking it in with a screwdriver; 4. Thread the wire through the center gap, connect to the cigarette lighter, and secure to the dashboard with transparent tape.

2

5

Share

Where is the cabin air filter located on the Chery Fengyun 2?

The cabin air filter of the Chery Fengyun 2 is located in the upper left position of the engine compartment. More information about the Chery Fengyun 2 is as follows: 1. The body dimensions of the Chery Fengyun 2 are 4188mm X 1686mm X 1480mm, with a wheelbase of 2527mm. 2. The Chery Fengyun 2 is equipped with a Chery self-developed ACTECO-1.5L engine, with a maximum power of 109 horsepower and a peak torque of 140N·m. 3. The trunk capacity of the Chery Fengyun 2 is 50L, and it expands to 1300L when the seats are folded down. The storage space is very generous, with storage compartments designed on the inner side of the front and rear door panels.

9

0

Share

Where is the air filter located in the Magotan?

The air filter in the Magotan is located in the engine compartment, specifically at the rear lower part of the headlight assembly on the passenger side. It is housed inside a black plastic box approximately 30 cm in length, which features a fastening mechanism. Opening this box reveals the air filter. The air filter, also known as an air cartridge, air cleaner, or air element, is primarily used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operation rooms. The Volkswagen Magotan is a mid-sized 4-door, 5-seater sedan with body dimensions of 4865 mm in length, 1832 mm in width, and 1471 mm in height, and a wheelbase of 2871 mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.

12

4

Share

Where is the rear fog light located?

Car rear fog lights are located on the left side or both sides of the taillights. Here is the relevant information: 1. When driving in adverse weather conditions such as fog, snow, heavy rain, or in smoke-filled environments, front fog lights must be used to illuminate the road ahead and ensure driving safety. 2. The main functions of fog lights are: (1) Front fog lights are used to improve illumination when the road conditions ahead are unclear and to alert oncoming drivers; (2) Rear fog lights are used in low visibility environments to make the vehicle visible to vehicles behind. 3. The usage methods of fog lights are: (1) When visibility is between 100 to 200 meters, fog lights, low beams, width indicator lights, and taillights must be turned on, and the distance from the vehicle ahead should be more than 100 meters; (2) When visibility is between 50 to 100 meters, fog lights, low beams, width indicator lights, and taillights should be turned on, and the distance from the vehicle ahead should be more than 50 meters.

10

4

Share

Is Evaporator Cleaning Necessary?

How to Replace Windshield Wiper Blades?

How to align with the shoulder line when reversing into a parking space?

Can Overwritten Dash Cam Footage Be Recovered?

Where is the cabin air filter located on the Chery Fengyun 2?

Where is the air filter located in the Magotan?

Where is the rear fog light located?

How to Connect a Cadillac Dash Cam to a Phone?

How to Determine if a Car Battery Has Power?

How to fold the mirrors of a Focus?

What is the fuel consumption of the Mercedes-Benz C-Class?