Is Engine Overheating and Stalling Serious?

How Much Engine Oil Should Be Added?

The amount of engine oil to be added should generally be maintained between the minimum and maximum marks on the dipstick. It is best not to go below the middle mark, as high-speed driving can cause the engine to heat up, making the oil thinner. If the oil level is too low, it can reduce lubrication effectiveness. It is acceptable to have a bit more oil, but never exceed the upper limit on the dipstick. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, and shock absorption. Often referred to as the 'blood' of a car, engine oil consists of base oil and additives. The base oil is the primary component of the lubricant, determining its fundamental properties, while additives compensate for and enhance the base oil's performance, providing additional benefits and making them a crucial part of the lubricant.

20

4

Share

Which Type of Engine Oil Should Be Used for the New Santana?

The New Santana should use 5W40 semi-synthetic engine oil. During operation, the internal temperature of the engine is very high. Using engine oil with a high viscosity value can protect the engine and cool the components to reduce the operating temperature. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. The New Santana measures 4475 mm in length, 1706 mm in width, and 1469 mm in height, with a wheelbase of 2603 mm. The vehicle is equipped with a 1.5-liter naturally aspirated engine coded EA211DLF, which delivers a maximum power of 82 kW and a maximum torque of 145 N·m.

1

Share

Can You Wash Your Car in Winter?

You can wash your car in winter. Although temperatures are low during winter, it is still possible to wash your car. It's best to choose a sunny afternoon for washing and promptly remove any water from the car's surface afterward to prevent freezing. When washing your car in winter, it's advisable to use warm water first to effectively avoid freezing. Winter car washing steps: 1. Wait for the engine to cool: In winter, the engine temperature is relatively high, and washing the car abruptly can lead to thermal expansion and contraction, which can significantly affect the engine and other components. 2. Pre-wash: Before the formal wash, a pre-wash is necessary. Professional tools are available at 4S shops for this process. 3. During the formal wash, different cleaning methods should be chosen for different parts of the car, following a top-down approach.

15

0

Share

How to Remove the ETC Device from the Car?

ETC Removal Method: The back of the ETC device is attached with double-sided tape. You can use a hairdryer to heat it up, then gently pry it off with a small plastic scraper, and finally wipe the area clean with a cloth. Note that removing the ETC device by yourself will deactivate it, so you must take your vehicle's registration certificate to the ETC service provider for reactivation. The ETC installation process is as follows: First, inspect the ETC card and the electronic tag (OBU) for any damage upon receiving the device. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display 'Tag Invalid, Please Insert Card,' indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film from the OBU's adhesive backing and attach it to the designated installation spot. Press firmly for 2-3 minutes to eliminate any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Cost and wear reduction: Saves money by decreasing the frequency of vehicle starts and stops, thus reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC systems more updated, faster, and more technologically advanced. Compared to license plate payment, ETC technology is more mature and advantageous.

11

3

Share

Which fuse is for the cigarette lighter in a Volkswagen Polo?

The following is relevant information about the Volkswagen Polo: 1. Fuse Box: The fuse box in the new Volkswagen Polo can be opened by simply prying it with your hand. Since car fuses are housed in the fuse box, they generally do not require special maintenance. However, it is important to note that if the fuse box cover is missing, the fuses should not be left exposed to avoid short circuits. Additionally, when covering fuses, do not use other materials as substitutes, as the fuse box material is specifically designed for insulation and high-temperature resistance. Using improper materials to cover fuses may pose a fire hazard. 2. Familiarize Yourself with Fuse Locations: If individual electrical components such as the cigarette lighter, power windows, air conditioning, or headlights stop working, and you hear a current or relay sound when turning them on, it is likely that a fuse has blown. If the vehicle fails to start, avoid repeatedly attempting to ignite the engine, as this can lead to excessive battery discharge. If the vehicle's lights remain bright, the issue may be a blown fuse responsible for the starter motor, which can melt due to excessive instantaneous current. When electrical components stop working, the first step is to check whether the fuse has blown before proceeding with further troubleshooting. Therefore, knowing the locations of the fuses in your vehicle is crucial. 3. High-Power Headlights: Be cautious when installing high-power headlights. Modifying headlights with excessive power can easily blow fuses, so it is necessary to promptly replace them with higher-current fuses and power cables to prevent overheating due to excessive current. Similarly, installing high-power audio systems can also cause fuses to blow. When adding high-power electrical components, always pay attention to the current requirements and replace the corresponding fuses accordingly. Reputable modification shops typically address this issue properly.

10

2

Share

Should the Nissan Tiida ECO Mode Be Turned On?

ECO mode works best when turned on in congested urban traffic conditions. In such scenarios, strong power is not required, and the frequent stops and starts lead to higher fuel consumption. Activating ECO mode not only reduces fuel consumption but also provides a more comfortable driving experience. Instances where ECO mode is unnecessary: There are a few situations where ECO mode is not needed: 1. When driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize ensuring sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Location of the ECO button: The ECO button is generally located on the left side of the car, marked with the letters 'ECO'. Some models feature a green button, making it easily identifiable.

12

2

Share

Is Engine Overheating and Stalling Serious?

How Much Engine Oil Should Be Added?

Which Type of Engine Oil Should Be Used for the New Santana?

Can You Wash Your Car in Winter?

How to Remove the ETC Device from the Car?

Which fuse is for the cigarette lighter in a Volkswagen Polo?

Should the Nissan Tiida ECO Mode Be Turned On?

How to Open the Fuel Tank Cap of the Older GL8 Model?

Should a New Car Be Equipped with Undercarriage Armor?

Does the X-Trail have a seven-seater version?

What are the reasons for the decrease in coolant?