···
Log in / Register

Is Engine Internal Protector Useful?

1 Answers
NorahLee
08/28/25 4:25am

Engine protector is a supplementary lubricant that can play an auxiliary role. The functions and usage methods of engine protector are as follows: Functions of engine protector: It is a lubrication technology that can permanently protect the engine and maximize the engine's potential; it can produce excellent lubrication effects and superior metal adhesion, forming a double-layer protective film on the engine surface to prevent engine wear and allow a certain degree of automatic repair for worn engine components. Usage method of engine protector: Add the engine protector to the engine oil. Before adding, let the engine idle to reach normal operating temperature. Use it once every 5,000 to 15,000 kilometers of vehicle operation.

Was this review help?
8
0
Share
More Forum Discussions

How to Replace the Remote Battery for BMW 3 Series?

BMW 3 Series remote battery replacement method: Remove the integrated key from the remote; Place the integrated key under the battery compartment cover and use it to lift the cover; Find a sharp object to press and pry out the battery; Insert the new battery and reattach the battery compartment cover. When the key battery is low, the vehicle will alert the owner in the following ways: Shortened remote control range or occasional malfunction; If the dashboard displays a "key not detected" message, it indicates the battery is depleted. If the message disappears after a while and the car operates normally, it means the key is currently in a low-power state and may run out of power at any time.
12
5
Share

What is the fuel tank capacity of the Cruze?

The fuel tank capacity of the Cruze is 44 liters, as officially announced. Owners who have purchased the Cruze can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Cruze is 92 octane, with a fuel consumption of 4.7-5.9L per 100 kilometers. A full tank can cover a distance of 746-936km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. In actual refueling situations, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel may exceed the marked capacity.
20
3
Share

Why does the car vibrate when idling with the AC on?

When idling with the AC on, the car may vibrate due to the following reasons: Carbon buildup in the car: As the vehicle accumulates more mileage, carbon deposits can form in various parts, especially in the throttle body. If the throttle body is excessively dirty, it can obstruct air intake, causing the engine to struggle or barely manage to power the compressor. This results in noticeable car vibrations when the AC is turned on. Engine mount failure: The engine naturally vibrates during operation (including when the compressor is activated), but these vibrations are usually dampened by the engine mounts, making them less noticeable to the driver. However, if the engine mounts are collapsed or damaged, the engine's balance is disrupted. When the compressor is engaged, it may reach a resonant frequency, intensifying the vibrations.
15
3
Share

What are the dimensions of the Volkswagen Magotan?

The body dimensions of the Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. Below is an introduction to the Magotan: 1. Model: The Magotan is a model under FAW-Volkswagen, and it is also the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. 2. Exterior: The Magotan features a resolute V-shaped front face that exudes stability and grandeur, with sleek and stylish body lines, achieving an aerodynamic drag coefficient as low as 0.28. The distinctive 'compound fisheye' adaptive turning bi-xenon headlights embody the design philosophy, showcasing wisdom and composure. 3. Front Face: The overall design of the Magotan resembles the X-shape of the Phaeton, with extensive use of chrome decorations and dual horizontal lines, highlighting its noble and extraordinary royal demeanor.
6
1
Share

Do New Energy Vehicles Have Radiation?

New energy vehicles have almost no radiation, so there is no need to worry about radiation issues. Classification of Radiation: In nature, there are only two types of radiation: ionizing radiation and electromagnetic radiation. Generally, ionizing radiation has a greater impact on the human body, but people rarely encounter this type of radiation in daily life. Radiation in Vehicles: Electromagnetic radiation is more common. Both inside and outside the human body, there are electric and magnetic energies emitted by natural and artificial radiation sources; lightning is one example of a natural radiation source. Whether it's electric vehicles or fuel-powered vehicles, they all produce electromagnetic radiation. However, this radiation is controlled within a safe limit and does not pose any health risks to humans.
11
4
Share

Why does the BYD S7 always lack coolant?

BYD S7 frequently lacking coolant may be due to natural loss, coolant leakage, or coolant entering the cylinder and participating in combustion. The specific reasons are as follows: 1. Natural loss: Various fluids in a car experience loss. Since coolant is responsible for cooling the car engine and is often in a high-temperature state, a natural loss of 10%-36% per year is considered normal. According to the technical requirements of NB/SH/T0521-2010 "Ethylene Glycol and Propylene Glycol Engine Coolants" issued by the National Energy Administration, the boiling point of a 50% volume fraction of coolant is above 100°C. The loss is mainly due to natural evaporation, and without replacement, the loss ranges between 10%-36% per year. 2. Coolant leakage: The second scenario is when the coolant level drops significantly within three to four days, requiring frequent top-ups. This indicates a coolant leak. Rubber and metal pipes under constant high temperatures can age due to thermal expansion and contraction, leading to small gaps through which coolant can seep. Common leakage points include the radiator hoses, air conditioning heater hoses, thermostat, and water pump seals. Regular inspection of sealing glue, tightening clamps, and timely maintenance can ensure driving safety and prevent breakdowns or accidents. 3. Coolant entering the cylinder and participating in combustion: The third scenario involves coolant entering the cylinder and participating in combustion, such as due to cylinder block cracks, cylinder gasket burning or corrosion deformation, etc. In this case, check the oil dipstick to see if the engine oil shows emulsification (oil emulsification is when the oil turns into a milky liquid, appearing milky white or milky yellow, resembling stirred batter with bubbles). Since the cylinder block has oil and water channels, once the cylinder gasket is damaged, the water channel cannot be sealed, and coolant flows into the oil channel.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.