···
Log in / Register

Is Engine Cylinder Cleaning Necessary?

4 Answers
ZaneRose
07/29/25 10:35pm

Cylinder carbon deposit cleaning is necessary as carbon buildup occurs in every vehicle to some extent, which is inevitable. The only difference lies in the amount of buildup. Excessive carbon deposits can alter the engine's original structural parameters, reduce engine power, and increase fuel consumption. In severe cases, it may even cause engine knocking, abnormal acceleration noises, and damage to pistons and crankshafts. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

Was this review help?
13
2
Share
DeQuinn
08/15/25 11:35pm

I believe engine cylinder cleaning is necessary, especially for experienced drivers like me who have been driving for ten years. After prolonged use, particularly with frequent idling in urban areas, carbon deposits accumulate in the combustion chamber, leading to increased fuel consumption and reduced power. Just like that time when my car was shaking badly, it ran much smoother after cleaning. Using high-quality gasoline with additives can help prevent carbon buildup. Cleaning methods can include professional shop services or regularly adding cleaning agents yourself, which isn't costly—around a few hundred yuan. However, for new cars or those frequently driven on highways, there's no need to rush into it; regular inspections can help decide. Don't overlook this maintenance—it extends engine life and avoids major repairs. In short, clean at the right time based on your car's condition, neither too frequently nor ignoring potential issues.

Was this review help?
11
3
Share
Expand All
LaZachary
10/18/25 3:44am

As an ordinary office worker, I frequently encounter traffic jams during my commute, and I find cylinder cleaning quite useful. Carbon buildup issues stem from prolonged idling and poor fuel quality, which can reduce engine efficiency. My car once experienced a sudden increase in fuel consumption. Cleaning methods include professional cleaning machines or additive sprays, and after removing carbon deposits, the engine runs smoothly again. However, I advise against falling for excessive sales pitches—only consider cleaning when symptoms like cold-start difficulties or sluggish acceleration appear. Costs range from one to five hundred, which is much more economical than repairing engine issues later. New cars generally don’t need this within the first five years—the key is to monitor your car’s condition. Overall, it’s a minor maintenance step; don’t overcomplicate it while neglecting routine upkeep.

Was this review help?
2
1
Share
Expand All
ElizaAnn
12/01/25 4:22am

Is in-cylinder cleaning necessary? I've driven my car for years without specifically doing it. The mechanic said carbon deposits can cause unstable idling or higher fuel consumption, and cleaning can help. I tried a spray treatment once and felt the engine ran quieter. The methods are basically adding additives to the fuel tank or professional cleaning, which are simple and safe. But for new cars or those with regular maintenance, there's no need for extra hassle. Consider it only when symptoms appear to save money and effort. Overall, it's not complicated—just choose to do it based on your car's condition.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

What Causes Misfiring in Cylinders 1 and 3 of a Subaru Engine?

Misfiring in cylinders 1 and 3 of a Subaru engine is typically caused by issues in the ignition system or fuel supply system. When misfiring occurs, it is necessary to inspect both the fuel supply system and the ignition system. Symptoms of misfiring: Observe the exhaust pipe outlet; the exhaust gas flow will show obvious intermittency, accompanied by severe shaking of the exhaust pipe and a distinct "popping" sound. The primary symptom of misfiring is severe engine vibration. This happens because one or more cylinders are not functioning, disrupting the engine's balance. When the crankshaft reaches the point where a cylinder should ignite and provide thrust, the lack of combustion causes the RPM to drop. When the next cylinder ignites and provides thrust, the RPM rises again, leading to unstable engine speed and noticeable vibration. Hazards of misfiring: The engine's RPM and power output decrease. Fuel consumption and emissions increase. Wear and tear on moving parts accelerate, shortening the oil change interval. The engine load increases, causing more pronounced body vibration and a higher likelihood of sudden stalling.
3
2
Share

Can a 2032 Battery Be Used in a Mercedes Car Key?

Mercedes car keys cannot use a 2032 battery. Mercedes car keys are designed for 2025 batteries, and the 2032 battery is not compatible with the 2025 battery. CR2025 Battery: The 'C' denotes a lithium metal negative electrode and a manganese dioxide positive electrode chemical battery system. 'R' indicates the battery shape is cylindrical (if square, 'F' is used instead). '20' represents the battery diameter of 20mm, and '25' indicates a thickness of 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges between 140-170mAh. CR2032 Battery: This lithium manganese dioxide battery follows the IEC standard naming convention. 'C' stands for the lithium metal negative electrode and manganese dioxide positive electrode chemical system. 'R' denotes a cylindrical shape (if square, 'F' is used). '20' indicates a 20mm diameter, and '32' represents a height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 200-240mAh.
8
5
Share

Why does the Jetta Partner have high idle speed?

The reasons for high idle speed in the Jetta Partner include idle switch not closing, faulty idle control valve, and intake manifold air leakage. Idle switch not closing: The rotation speed signal determines the fuel injection volume and injection timing. However, when the engine is operating under idle conditions with reduced air intake, it leads to an overly rich air-fuel mixture and consequently increased rotation speed. Faulty idle control valve: When the idle speed exceeds the set value, the ECU commands the idle control valve to reduce the intake bypass channel, thereby decreasing air intake and lowering engine speed. Issues such as sticking due to oil contamination or carbon deposits, or incomplete throttle valve closure can prevent the ECU from properly regulating engine idle speed, resulting in unstable idle conditions. Intake manifold air leakage: The opening degree of the idle control valve and the air intake strictly follow a certain functional relationship, where an increase in the valve's opening corresponds to an increase in air intake. Air leakage in the intake manifold disrupts this strict functional relationship between the idle control valve's opening and air intake. As a result, the air flow sensor cannot accurately measure the actual air intake, leading to inaccurate air intake control by the ECU and causing unstable engine idle speed.
10
3
Share

What Does the Geely Gear Exclamation Mark Mean?

An exclamation mark inside a gear is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. It is necessary to replace the transmission oil promptly. The exclamation mark is a common fault warning in cars. In addition to the exclamation mark inside a gear, there are four other forms of exclamation marks: an exclamation mark inside a triangle, an exclamation mark inside a circle with brackets, an exclamation mark with a horizontal line below brackets, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, and engine oil pressure sensor faults. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Brake System Fault: An exclamation mark inside a circle with brackets. This represents a brake system warning, mainly indicating a fault in the brake system or low brake fluid levels. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line below brackets. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating that a car light has malfunctioned. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue.
3
0
Share

How Many Airbags Does the Chery Ant Have?

Chery Ant is equipped with two airbags. Function of Airbags: Airbags are a passive safety protection system in vehicles that can save lives in critical moments. In the event of a collision, the airbag inflates and deploys instantly, reducing the probability of facial injuries by approximately 80% and the probability of head injuries by about 25%. Airbags work best when used in conjunction with seat belts. Precautions for Using Airbags: Do not impact or strike the areas where airbags are installed, as this may cause the airbags to deploy unexpectedly and cause harm. When cleaning the car interior, avoid splashing water on the areas with airbags, as prolonged exposure to moisture may prevent the airbags from deploying properly.
7
0
Share

What Causes Car Vibration When the Air Conditioner is On?

Car vibration when the air conditioner is on can be caused by: 1. Severe carbon buildup in the engine cylinders; 2. Fuel supply system malfunction, unstable oil pressure; 3. Aging engine mounts; 4. Engine misfire or cylinder failure. Solutions for slight car vibration when the air conditioner is on include: 1. Cleaning engine carbon deposits; 2. Checking the fuel supply system for faults; 3. Replacing engine mounts. The functions of a car air conditioner are: 1. Achieving cooling effects through the continuous cycle of refrigerant; 2. Removing dust, odors, smoke, and toxic gases from the car's interior to freshen the air, and humidifying the interior air to increase relative humidity.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.