Is Elysion from GAC or Dongfeng?

Where is the trip computer located in the Volkswagen CC?

The trip computer is displayed in the center of the instrument panel. Here are the relevant details about the trip computer display: Introduction to the function of the trip computer display: The trip computer display presents part of the vehicle's computer data in a screen format. It allows drivers to view information such as average fuel consumption, instantaneous fuel consumption, outside temperature, average speed, driving time, and single-trip mileage, helping them stay informed about their vehicle's status. How to change the trip computer language to Chinese: 1. Turn the key to power on the vehicle. 2. Press the 'set' button on the left side of the multifunction steering wheel. 3. Press the '+' key on the left side of the multifunction keyboard. 4. When the language switch option (Chinese/English) appears on the instrument panel, select 'Chinese'. 5. Press the 'OK' button on the left side of the steering wheel to confirm.

13

1

Share

Where is the rear emblem located on the Audi A6?

The rear emblem of the Audi A6 is located at the lower left side of the rear. Description of the vehicle identification plate: It is a plate indicating the basic characteristics of the vehicle, mainly including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, manufacturing number, production date, and manufacturer name. Features of the Audi A6: It is a mid-to-large-sized 4-door 5-seater sedan equipped with a 5-speed manual transmission. Its length, width, and height are 4886mm, 1810mm, and 1475mm respectively, with a wheelbase of 2850mm. The top speed reaches 214 km/h, and the fuel tank capacity is 70L.

12

5

Share

Does the Lavida car key need to be re-paired after replacing the battery?

Replacing the battery in a Lavida car key does not require re-pairing. Method for replacing the key battery: Gently press the small switch on the back of the key to remove the mechanical key. Then, use the mechanical key to open the key cover by inserting it into the slot next to the key and gently prying it open. It is recommended to use a small flat-head screwdriver for easier removal of the old battery. Ensure the new battery is installed with the positive side facing up, then reattach the key cover and mechanical key. Precautions for battery replacement: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency of key usage. The amount of power consumed also differs based on the distance from which the key is used. Replacing the battery in a smart car key should be done with caution, as any mistake could damage the circuit board inside the key.

11

3

Share

What to do if the ABS light stays on?

Methods to handle a continuously illuminated ABS light: Open the driver's side door of the car, pull the hood release lever located on the left side of the driver's leg area, then lift the engine hood upwards. Use the support rod to secure the engine hood in place, ensuring it is firmly supported to prevent any hazards during operation. Next, replenish the vehicle's brake fluid to the MAX level. ABS stands for Anti-lock Braking System. This light should briefly illuminate for a few seconds during startup as the system performs a self-check, and it should automatically turn off if no issues are detected. During driving, if you press the brake pedal rapidly to the floor, the ABS will activate, causing the light to illuminate. Releasing the brake will deactivate the ABS and turn off the light.

2

3

Share

What Causes the Abnormal Noise After Parking a Tesla?

Tesla abnormal noise after parking may be caused by the following reasons: Foreign Object Accumulation: Excessive accumulation of foreign objects on the fender or sound insulation pad. When the car turns, the tire interferes with the foreign objects, resulting in abnormal noise. The noise disappears after cleaning the fender. Screw Loosening: The fastening screws of the fender or sound insulation pad become loose, causing the fender or sound insulation pad to lift. During turns, the front wheel interferes with it, creating friction and abnormal noise. It is necessary to check the fastening condition of the fender and sound insulation pad and eliminate factors such as looseness and lifting. Tire Model Mismatch: Unauthorized modification of car tires, replacing them with non-original size tires. For example, widening the tires or increasing the diameter may cause interference between the tire and the car body when turning, resulting in noise. This poses a significant safety hazard, and the original size tires should be reinstalled.

19

3

Share

Reasons for Shaking When Starting in First Gear with a Cold Engine

Causes of car shaking: 1. Excessive carbon deposits If there is severe carbon buildup in the engine cylinders, it can lead to spark plug blockage and valve blockage, directly causing the car to shake during idling. If the car's acceleration performance has significantly declined and the shaking is persistent, consider cleaning the engine cylinders. 2. Fuel supply system failure Unstable fuel pressure can easily cause fluctuations in the mixture concentration, not only resulting in shaking but also causing unstable idling. First, consider replacing the fuel filter, as prolonged use may clog the filter element. Then check the fuel pressure bypassing the fuel filter; if abnormal, it might be an issue with the fuel pump. 3. Aging engine mounts This is also a very common cause of shaking. If the engine shaking becomes increasingly severe but the power does not weaken accordingly, consider whether it is an issue with the engine mounts.

10

3

Share

Is Elysion from GAC or Dongfeng?

Where is the trip computer located in the Volkswagen CC?

Where is the rear emblem located on the Audi A6?

Does the Lavida car key need to be re-paired after replacing the battery?

What to do if the ABS light stays on?

What Causes the Abnormal Noise After Parking a Tesla?

Reasons for Shaking When Starting in First Gear with a Cold Engine

What Should You Pay Attention to with a New Car?

How to Avoid Crossing the Line in the Curve Driving Test for Subject 2?

What Does Clay Bar and Waxing Mean?

What Causes Car Shaking During Ignition?