Is Electronic Capture Effective When Someone Is in the Car?

1 Answers
VanNaomi
07/30/25 5:45am
Electronic capture is effective even when someone is in the car. Below is the principle of how traffic cameras capture red-light running: 1. First Photo: When the front wheels of the vehicle pass over the induction coil on the ground, the camera takes the first photo of the vehicle. 2. Second Photo: When the rear wheels of the vehicle pass over the induction coil on the ground, the camera takes the second photo of the vehicle. 3. Third Photo: When the vehicle crosses the intersection and passes over the induction coil on the opposite side of the road, the camera takes the third photo of the vehicle. Below is additional relevant information: 1. Penalty: Running a red light is a violation of traffic signal rules. Drivers who violate traffic signals at intersections will be subject to corresponding penalties. 2. Red-Light Running: Generally, if the vehicle stops after crossing the stop line, it will not be penalized for crossing the line. However, if the vehicle continues to move forward instead of stopping, it will be penalized for running a red light.
Was this review help?
5
2
Share
More Forum Discussions

How to connect a phone to the base model Qoros 3?

Steps to connect a phone to the base model Qoros 3: 1. Open the door near the driver's side; 2. Press the brake pedal to prepare to start the engine; 3. Press the one-touch start button; 4. All dashboard lights will illuminate, indicating the engine has started; 5. Use a connecting cable to link the phone to the car's USB port; 6. Press the Bluetooth activation button on the center console to start using it. The method to replace the battery in a Qoros 5 key is: 1. Remove the mechanical key, use a flat-head screwdriver to pry open the key shell along the seam, separating the front and back shells; 2. Open the battery cover, remove the old battery, and replace it with a new one.
15
3
Share

Is It Illegal to Replace Car Light Bulbs?

Replacing car light bulbs is illegal. The types of car light bulbs include: h1, h4, h7, 9005, 9006. The methods to distinguish car bulb models are: 1. Check if the headlight is a combination of high and low beams. If it is, the bulb model is h4; 2. Open the hood, remove the headlight protective cover, take out the bulb, and identify it by the lamp base and socket; 3. If the headlight has one lamp base and a flat rectangular metal socket, it is h1. The methods to check car bulb model specifications are: 1. Examine the bulb removed from the car. There are specific model markings at the bottom of the bulb, and the headlight assembly is labeled with the specific bulb model; 2. Refer to the vehicle maintenance manual and look for the list of wear parts in the manual.
8
2
Share

At What Moisture Content Should Brake Fluid Be Replaced?

Generally, brake fluid should be replaced when its moisture content reaches 2.5%. Below is some information about brake fluid moisture content: 1. The moisture content in brake fluid is a critical indicator for determining whether it needs replacement. When the moisture content reaches a certain level, high temperatures can cause the water to evaporate and vaporize, forming vapor pockets in the brake lines. This can lead to sluggish, delayed, or even failed braking. 2. Typically, brake fluid requires replacement when its moisture content reaches 2.5%. Therefore, testing the moisture content or the boiling point of the brake fluid is an effective method to determine if replacement is necessary.
5
3
Share

What's the reason for no acceleration when stepping on the gas?

Reasons for no acceleration when stepping on the gas: 1. Clogged fuel line; 2. Dirty fuel filter; 3. Abnormal high-voltage spark plug; 4. Air leakage in the cylinder or carbon deposits causing incomplete valve closure. Solutions for no acceleration when stepping on the gas: 1. Clean the fuel line; 2. Replace the fuel filter; 3. Replace the spark plug; 4. Remove carbon deposits. Precautions for stepping on the accelerator: 1. Press and release the accelerator pedal gently and slowly; 2. Coordinate the release of the clutch with stepping on the accelerator promptly; 3. Choose the appropriate gear to keep the engine running at medium speed and larger throttle most of the time to save fuel; 4. Before the car stops or turns off, release the accelerator pedal first and avoid revving the engine abruptly. Solution for unstable throttle: Adjust the action of stepping on the accelerator pedal. When stepping on the accelerator pedal, place the heel of the right foot on the floor of the cab as a support point, press the sole on the accelerator pedal, and use the flexion and extension of the ankle joint to press down and lift the accelerator pedal. The throttle, also known as the air valve and throttle valve, is a control device for engine power thrust. It controls the throttle opening of the carburetor to regulate the cylinder's filling volume and determine the engine's output power.
2
0
Share

What are the models of range-extended electric vehicles?

Range-extended electric vehicles include the following models: Li ONE: The Li ONE has achieved relatively good sales among new energy vehicle models. Its spacious interior has always been a selling point, with the current model's body length reaching 5030mm. Additionally, the Li ONE still adopts a dual-motor setup (front and rear), enabling electric four-wheel drive. However, the rear motor has been upgraded to a more compact three-in-one motor, providing space for a larger fuel tank. The dual motors deliver a maximum power of 333 horsepower (245kW) and a peak torque of 455N·m, enabling the vehicle to accelerate from 0-100km/h in just 6.5 seconds. Furthermore, the pure electric range of the Li ONE has been increased to 188km, with the NEDC range extended to 1080km. SERES SF5: The SERES SF5 is produced by SERES, a new sub-brand under Dongfeng Xiaokang with new energy vehicle production qualifications. As a new energy SUV, the SERES SF5 boasts a highly distinctive exterior design. In terms of dimensions, the vehicle measures 4700×1930×1625mm with a wheelbase of 2875mm. As a range-extended electric vehicle, the SERES SF5 is equipped with an electric motor and a range extender consisting of a 1.5T turbocharged four-cylinder engine paired with a permanent magnet synchronous generator that delivers a maximum output of 90kW. The two-wheel-drive high-performance variant features a single motor with a combined maximum output of 347 horsepower and a peak torque of 520N·m. The four-wheel-drive high-performance version comes with dual motors, offering a combined maximum output of 694 horsepower and a peak torque of 1040N·m. The Free Expedition variant delivers a combined maximum output of 551 horsepower and a peak torque of 820N·m. VOYAH FREE Range-Extended Version: As the first model under Dongfeng Motor's premium electric brand VOYAH, the VOYAH FREE is positioned as a five-seat mid-to-large SUV, built on the ESSA native intelligent electric architecture. It offers both pure electric and range-extended hybrid powertrain options for consumers. The front fascia of the VOYAH FREE features an angled waterfall-style grille that accommodates the air intake needs of the range extender. The vehicle measures 4905/1950/1645 (1660)mm in length, width, and height, with a wheelbase of 2960mm. The range-extended version of the VOYAH FREE employs a 1.5T four-cylinder intelligent power generation system, which determines the intervention of the range extender based on the vehicle's SOC and speed. The NEDC combined range of the VOYAH FREE range-extended version is 860km, with its dual motors delivering a maximum power of 510kW and a peak torque of 1040N·m. Moreover, the VOYAH FREE can accelerate from 0-100km/h in just over 4 seconds, with a top speed of 200km/h.
9
4
Share

What to Do When the Keys Are Locked Inside the Car?

Here are the solutions when the keys are locked inside the car: 1. Find a spare key. If you lock your car keys inside the car while visiting friends or relatives, remember that the manufacturer provides two keys when you purchase the car, so there must be a spare key. You can arrange for another vehicle to go home and retrieve the spare key, then unlock the car. Although this method takes time, it won't cause any damage to the car. 2. Contact the manufacturer. If the spare key is not available and you only have one key, you can call the manufacturer. Based on the car model, the manufacturer will identify the key model. Bring your ID card, vehicle license, and relevant purchase documents to obtain a new key from the manufacturer as a spare. 3. Hire a professional locksmith. Look for a professional car locksmith who is registered with the public security bureau for peace of mind. The locksmith has specialized tools to easily unlock the car and replace the lock. After replacing the lock, remember to keep at least one spare key to avoid future lockouts. 4. Disconnect the power supply. Most modern car keys are electronic remotes. If you disconnect the car's power supply, the door locking function will be disabled. Open the car's front hood, disconnect the battery power, and the electronic lock on the door will deactivate, allowing you to open the car. Afterward, restore the power supply.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.