Is driving in Canada left-hand or right-hand drive?

2 Answers
OHaven
07/24/25 12:08am
Driving in Canada is left-hand drive. Here is a brief introduction about Canada: 1. Basic information: Canada (English/French: Canada) is a North American country located in the northern part of North America, with both maritime and land borders. It is bordered by the Atlantic Ocean to the east, the Pacific Ocean to the west, the U.S. state of Alaska to the northwest, the contiguous United States to the south, and the Arctic Ocean to the north. 2. Land area: Canada has a land area of 9.98 million square kilometers, ranking second in the world. Of this, 890,000 square kilometers are covered by freshwater. The climate is mostly subarctic continental and temperate continental humid, with polar long-cold climate in the northern polar regions. As of November 2019, Canada is divided into 10 provinces and 3 territories, with its capital in Ottawa.
Was this review help?
19
5
Share
LeilaLee
08/10/25 7:57pm
I've been driving for several decades. Here in Canada, the steering wheel is on the left, so we drive on the right side of the road. The winter when I first got my driver's license, I took a long-distance trip from Toronto to Montreal. There was heavy snow on the road, but traffic was quite smooth because the rules here are designed reasonably. Remembering to keep right makes turns and lane changes safer, especially at city intersections—don't take the wrong lane. A few years ago when I was on a business trip to the UK, where the driving side is opposite, it took me a few days to get used to it. I suggest that beginners drive familiar routes several times to get accustomed, and also take the opportunity to check the car lights and tire wear. Following the rules saves a lot of trouble, and on Canadian highways, the scenery is beautiful, making driving quite enjoyable.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

How to reset the seat memory on the Lynk & Co 01?

The method to reset the seat memory on the Lynk & Co 01 is as follows: 1. Press the start switch, adjust the seat and rearview mirror to the desired preset position, then press the memory button M. The indicator light on the button will illuminate. 2. Within a short time, hold down the position 1 button until the indicator light on the M button turns off and an audible reminder sounds. The relevant position will then be stored under the position 1 button. 3. When adjusting the driver's seat, note: The distance between the steering wheel and the chest should not be less than 25 cm. If it is less than 25 cm, the airbag system may not provide protection, which could be life-threatening.
15
5
Share

What is the fault code for insufficient turbo boost pressure?

P0299 fault code, applicable to all automobile manufacturers, means the turbo/supercharger is in a state of insufficient boost. This is generally caused by air leaks in the piping or the pressure relief valve being stuck open. It is necessary to check whether the turbocharger bypass valve and linkage mechanism are stuck, and whether the intake passage is blocked. Turbocharger: A turbocharger uses the inertial force of exhaust gases expelled by the engine to drive the turbine, which in turn drives the coaxial impeller to boost the intake air pressure, thereby increasing the vehicle's power. Note: Since turbochargers often operate at high speeds and temperatures, with the exhaust turbine side reaching around 600 degrees Celsius and the rotor spinning at 8,000 to 11,000 rpm, it is essential to maintain cleanliness, perform regular cleaning, and pay attention to maintenance to ensure the turbocharger functions properly.
2
3
Share

What are the differences between the Guangben URV and the Crown Road?

There are several main differences between the Guangben URV and the Crown Road: 1. Price: The official guide price of the GAC Honda Crown Road is slightly lower than that of the Dongfeng Honda URV. 2. Appearance: The URV and the Crown Road have very similar front faces, featuring Honda's family-style design. The headlights and the grille are connected under a chrome trim strip, with almost identical headlight assemblies. The front bumper and rear end are the key distinguishing features between the two. For example, the URV adopts a full-width taillight design, which visually appears more premium than the traditional taillights of the Crown Road. 3. Compared to the Crown Road, the URV's body length is increased by 9mm, and the height is increased by 1mm.
8
0
Share

What Causes Abnormal Noises When a Car is Driving at Low Speed?

Vehicle driving at low speed when there is abnormal noise reasons are as follows: 1. Excessive clearance between the piston and cylinder wall. 2. The piston pin is assembled too tightly or the connecting rod bearing is assembled too tightly. 3. Excessive clearance between the tappet and its guide hole. 4. Wear of the cam profile of the valve train. Solution for abnormal noise when the vehicle is driving at low speed: Do not try to solve it by yourself, you need to go to the 4S shop for professional maintenance personnel to check and repair according to the actual situation. More information about abnormal noise when the vehicle is driving is as follows: 1. Most common abnormal noises of the engine depend on the speed state of the engine. 2. There are also many abnormal noises in the engine that are obviously related to the load.
20
4
Share

Reasons Why the Thermostat Fails to Open?

Reasons why the thermostat fails to open are as follows: 1. Internal damage to the thermostat, caused by excessively high temperatures for valve opening and full opening. 2. Damage to the thermostat's opening valve, due to prolonged warm-up time and low water temperature. 3. Blockage in the water passage, caused by debris or dust near the water passage. 4. Frozen radiator, primarily due to extremely low temperatures or the absence of antifreeze. 5. Water temperature too low, mainly caused by the detachment of the main valve or leakage of the oil controlling the main valve's movement. Solutions are as follows: 1. Inspect the thermostat internally. 2. Replace the opening valve. 3. Clear the water passage. 4. Defrost the radiator.
1
2
Share

What should not be used to extinguish a motor vehicle fuel fire?

When a motor vehicle fuel fire occurs, water should not be used for extinguishing. Here are the relevant details: 1. Reasons for not using water: Water cannot be used to put out fuel fires because water has a higher density than oil. When oil and water are mixed, the oil will float on top of the water. Not only does this fail to extinguish the fuel fire immediately, but it may also spread the fuel and expand the fire area. 2. Correct actions during a fire: If a fire is discovered, quickly call the fire department at 119. When reporting the fire, provide clear details including the exact address, location of the fire, type of burning material, size of the fire, your name and phone number, and send someone to meet the fire truck at the intersection.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.