Is driving for 8 hours very tiring?

2 Answers
Dora
07/29/25 6:28pm
Driving continuously for eight hours can be very tiring. Here are some precautions for long-distance driving: 1. Check the condition of the car: Pay attention to any water or oil leaks, and check whether the mechanical parts, lights, battery, and tire pressure are normal. Before setting off, ensure sufficient fuel, engine oil, and coolant. After starting the car, check if the instruments and charging system display normally, test-run the engine and chassis for any unusual noises, and verify that the brakes, horn, turn signals, brake lights, headlights, and windshield wipers are functioning properly. Additionally, tire safety is extremely important—it is recommended to carry a car air pump to inflate the tires as needed. 2. Prepare a map: Currently, road signs in the country are not very comprehensive, and relying solely on road indicators may make it difficult to reach your destination. 3. Avoid fatigued driving: According to legal regulations, drivers must rest for 20 minutes after driving for four hours. Fatigued driving not only increases the risk of traffic accidents but also poses a threat to personal safety.
Was this review help?
8
5
Share
BrielleLynn
08/14/25 11:26am
I think driving for 8 hours would definitely be exhausting. Sitting in the driver's seat for a long time can make your body stiff, especially your lower back and neck, which are prone to soreness. Your concentration will also decline, reactions slow down, and fatigued driving can easily lead to accidents. It's recommended to stop and take a 10-15 minute break every 2 hours or so, get out of the car to walk around, stretch your legs, and drink some water or coffee to refresh yourself. Weather conditions like high temperatures or rain can also increase fatigue. Don't forget to check your vehicle's condition, avoid long-distance driving at night, and ensure you get enough sleep before setting off. Safety is the top priority—don't push yourself too hard. If you feel drowsy, find a safe place to pull over and take a short nap. The level of fatigue varies from person to person; healthier individuals might fare slightly better, but overall, prolonged driving like this isn't good for your health.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What causes the ESC warning light to come on?

ESC stands for Electronic Stability Controller, which is the vehicle's electronic stability control system. The main function of ESC is to make the car more stable and safe when changing lanes or cornering. Under normal driving conditions, the ESC system does not operate. When the ignition switch is turned on, ESC is activated, the warning light comes on, and the ESC off indicator light illuminates for about 4 seconds before turning off. If the ESC warning light on the car remains constantly lit, it indicates a fault in the vehicle's ESC, and the electronic stability control system is not functioning at this time. ESC mainly consists of three components: sensors, actuators, and the electronic control unit (ECU). A fault in any of these parts can cause the ESC warning light to illuminate. When the ESC warning light comes on, you can try restarting the engine, pressing the ESC off button on the vehicle, and then restarting again to see if the warning light was triggered by a false fault. Detecting ESC faults requires a specialized diagnostic tool for troubleshooting and identification. It should be sent to a 4S shop for inspection as soon as possible.
13
4
Share

Can I still use highways without ETC in the future?

Yes, vehicles without ETC can still use highways. According to regulations from the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will remain at highway toll stations, and drivers must pay tolls through the manual channel. Additionally, newly installed ETC devices cannot be used immediately on highways—they must be activated first. During free holiday periods, highways can still be used. For vehicles already equipped with ETC, passing through ETC lanes during these periods will not incur charges. ETC Billing Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's onboard electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system uses computer networking technology to settle payments with banks in the background. This allows vehicles to pay tolls without stopping at toll booths, operating on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles don’t need to stop at toll booths; Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation smart cards, and the adoption rate of ETC in vehicles should significantly increase." The plan also set a target of "50% ETC usage rate for passenger vehicles on roads by 2020." Future possibilities: Beyond improving the convenience of ETC installation and increasing its adoption rate among passenger vehicles, efforts will also focus on promoting ETC for trucks and exploring deeper integration between ETC systems and smart transportation developments like vehicle-to-vehicle communication and vehicle-infrastructure coordination. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC usage.
13
5
Share

How to deal with the Peugeot's stop light turning off after restarting normally?

This situation is usually caused by insufficient engine oil pressure or insufficient coolant. The light will turn off when the water temperature rises, and the red light indicates that the water temperature is too high. In this case, you generally need to drive to an auto repair shop and use professional computer diagnostic equipment to detect the fault codes stored in the vehicle's computer.
17
3
Share

What are the steps for a beginner to get started with an automatic transmission in C2 Subject 2?

Check if the door light is off. Adjust the seat to a position where your left foot can comfortably reach the pedals, then lock the seat in place. Align the horizon line to the center of the rearview mirror. After fastening the seatbelt, test if you can fully depress the clutch. Release the handbrake → Depress the clutch → Shift into gear → Slowly release the clutch → Gently press the accelerator.
10
4
Share

What Causes the Sudden Abnormal Noise at the Moment of Successful Ignition?

Here are the main reasons for the sudden abnormal noise at the moment of successful ignition in a car: Incorrect gear shifting and clutch operation: The gear is engaged, and the clutch is not fully depressed. Starter motor slipping: At the moment of ignition, the car's starter motor slips, causing the noise. Excessive cranking time: Prolonged cranking leads to the flywheel hitting the starter gear at the moment of successful ignition. Belt slipping: During ignition, belt slipping may also cause abnormal noise, but this usually disappears once the engine belt reaches operating speed. Note: It is recommended to have the vehicle inspected at a repair shop as soon as possible for the above reasons, otherwise it may affect the vehicle's lifespan.
19
0
Share

Is Car Soundproofing Really Necessary?

Car soundproofing is necessary. The causes of car noise are as follows: Engine Noise: The engine noise increases with the rise in engine speed. Apart from the driver's control, car soundproofing can further improve the engine noise. Owners can have professionals treat the internal and external parts of the engine firewall to effectively reduce engine noise. Road Noise and Tire Noise: Vibration and noise are generated due to the friction between the tires and the road surface. Additionally, there is a significant difference in tire noise between asphalt and concrete roads. The best method to reduce road and tire noise is vibration damping. Comprehensive soundproofing construction of the wheel wells, floor, and doors using damping plates or specialized damping plates, along with sound-absorbing pads and door seals, can effectively improve tire and road noise.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.