Is Driving Barefoot Illegal?

When is the first car maintenance?

Vehicle first maintenance is performed at around six months or 5,000 kilometers. The first maintenance includes the following items: 1. Replace engine oil, oil filter, fuel filter, and air filter. 2. Check whether the level of car coolant meets the specified requirements. 3. Check the level of brake and clutch fluid. 4. Check the level of battery fluid and windshield washer fluid. 5. Check whether the oil level of the power steering fluid reservoir meets the specified requirements, and check whether there is any oil leakage at the interfaces of various oil pipes in the system. 6. Check whether the front and rear lights of the car are complete. 7. Check the tightness and aging of the belts of the generator, air conditioner, water pump, and power steering pump. 8. Check whether the car's exhaust emissions meet the standards.

7

1

Share

What is the normal voltage of a car battery?

Under no-load conditions, the normal voltage of a car battery is approximately 13 volts. When under load, the voltage should be greater than 11 volts. If the voltage drops below this threshold, it may result in the engine failing to start or experiencing difficulty in starting. Car batteries are categorized into traditional lead-acid batteries and maintenance-free batteries. Maintenance steps are as follows: 1. Use a damp cloth to clean the exterior of the battery, including dust, oil stains, and white powder on the panel and terminals, as these substances may cause leakage. 2. Open the battery's water-filling caps to check if the water level is normal. 3. Verify whether the battery is charging properly.

4

1

Share

How Often Should Vehicle Tires Be Replaced?

Car tires should generally be replaced based on their wear indicators, with a typical replacement cycle ranging between 3-5 years or 40,000-60,000 kilometers. 1. Primarily determined by tire wear indicators. When the tire wear reaches the indicator mark, it means the tread groove depth is less than 1.6 millimeters, and new tires should be replaced as soon as possible for driving safety. 2. Replacement based on tire age. The sidewall of the tire displays a 4-digit number indicating its manufacturing date, where the first two digits represent the week and the last two the year. 3. Pay attention to the actual mileage driven. Under normal driving conditions, tires should be replaced after approximately 40,000-60,000 kilometers, as exceeding this mileage increases driving risks. 4. Inspect the tread, shoulder, and sidewalls for any damage, such as visible cracks, bulges, deformations, or punctures.

13

5

Share

What Causes Shaking When Starting a Manual Transmission Car?

Starting shaking is caused by the wear and slipping of the clutch pressure plate and disc, due to aging or quality issues. Both the pressure plate and disc need to be replaced simultaneously. Below is extended information on starting shaking: 1. When the car shakes during starting, let the engine idle. 2. Engage a low gear, slowly release the clutch pedal and increase the throttle to start. If the body shakes noticeably, it indicates clutch shuddering. 3. Clutch shuddering can also be caused by broken or loose driven plate rivets, fractured driven plate steel sheets, or unbalanced rotating components. 4. Loose engine mounts or misalignment between the transmission's first shaft and the engine crankshaft centerline can also lead to car shaking during starting.

1

2

Share

Which Switch is for the Rearview Mirror Heating?

The rearview mirror heating button icon is shaped like a square frame with three upward curved arrows inside. The rearview mirror heating function refers to when the car is driving in rainy, snowy, or foggy weather, the rearview mirror can be heated by the heating wires embedded behind the mirror to ensure a clear surface. The rearview mirror heating is particularly useful in rainy or snowy conditions. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius. The heat will dissipate from both left and right rearview mirrors. Meanwhile, as the temperature rises and evaporation occurs, water droplets on the mirror will shrink, and fog will gradually disappear, effectively heating the mirror and removing frost. If the rain is particularly heavy, its effectiveness may decrease and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding heating wires to the mirror. These wires consume a significant amount of electricity. When using this function, ensure the car is in an ignited state. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery, which could lead to insufficient power for starting the car. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow air exchange between the inside and outside of the car. This reduces the temperature difference, causing the fog to gradually disappear. Adjust the car's air conditioning to the appropriate setting to blow warm air for defogging.

18

2

Share

Can You Sleep in the Ford Mondeo with the Rear Seats Folded Down?

You can sleep in the Ford Mondeo with the rear seats folded down. The rear seats of the Mondeo support a 4/6 split-folding function, expanding the trunk capacity to 986 liters. When the rear seats are folded down, they create a completely flat space, which not only allows for carrying more items but also comfortably accommodates two people for sleeping. Here are some details about the Ford Mondeo: 1. The Mondeo's trunk has a standard capacity of 516 liters. Measured trunk dimensions include a length of 1150-2040mm, width of 1010-1320mm, and height of 520mm. To fold down the rear seats, locate the two circular pull rings behind the rear seatbacks on each side, pull them firmly, close the central guardrail of the rear seats, retract the rear seatbelt buckles, lower the headrests to their minimum position, and finally pull the seat folding switch located at the shoulder of the rear seats to fold them down. 2. The Ford Mondeo's rear seats feature adjustable headrest heights to accommodate passengers of different heights, providing better head support and reducing the risk of neck injuries in sudden situations. The center rear seat headrest can be folded down using the circular button on the side, ensuring it doesn't obstruct the driver's view when not in use.

8

5

Share

Is Driving Barefoot Illegal?

When is the first car maintenance?

What is the normal voltage of a car battery?

How Often Should Vehicle Tires Be Replaced?

What Causes Shaking When Starting a Manual Transmission Car?

Which Switch is for the Rearview Mirror Heating?

Can You Sleep in the Ford Mondeo with the Rear Seats Folded Down?

Differences Between Automatic and Manual Transmission Cars

The Difference Between Coolant and Cooling Water

How to Reset the Maintenance Wrench Light on Honda Envix?

How to Determine the Quality of an Electric Vehicle Battery?