Is driving at 92 km/h in an 80 km/h speed limit zone considered speeding?

1 Answers
NadiaRose
07/30/25 8:59am
Driving at 92 km/h in an 80 km/h speed limit zone constitutes a 12.5% speeding violation. According to relevant penalty regulations, exceeding the speed limit by 12.5% falls between 10% and 20% over the limit, resulting in a 3-point deduction and a fine. China's highway speed limit regulations: Signage speed limits refer to the speeds indicated by traffic signs and markings on roads. The specific speed limits are determined by transportation authorities based on factors such as road design speed, functional type, geometric alignment characteristics, traffic flow, and roadside environment. Regulatory speed limits: According to the Road Traffic Safety Law and its implementation regulations, roads without centerlines have a speed limit of 40 km/h; roads with only one lane in the same direction have a speed limit of 70 km/h; when entering or exiting non-motorized lanes, passing through railway crossings, sharp curves, narrow roads, narrow bridges, or when making U-turns, turning, or descending steep slopes, the speed limit is 30 km/h. The maximum speed limit on expressways is 120 km/h. Special time and weather speed limits: According to the Road Traffic Safety Law and its implementation regulations, when driving on ordinary roads in fog, rain, snow, dust, or hail with visibility less than 50 meters, or when driving on icy or muddy roads, the speed limit is 30 km/h. To strictly manage passenger vehicles, the speed between 10 PM and 5 AM must not exceed 80% of the daytime speed limit. Speeding fine amounts: Exceeding the speed limit by less than 10% will not be penalized; exceeding the speed limit by 10% to less than 20% will result in a fine and 3-point deduction; exceeding the speed limit by 20% to less than 30% will result in a fine and 6-point deduction; exceeding the speed limit by 50% to less than 70% will result in a fine, 12-point deduction, and possible license revocation; exceeding the speed limit by 70% or more will result in a fine, 12-point deduction, and possible license revocation.
Was this review help?
3
3
Share
More Forum Discussions

How often should Mazda brake fluid be changed?

Mazda brake fluid should generally be replaced every two years or 40,000 kilometers. If not replaced for a long time, the brake fluid will become cloudy and gradually absorb moisture from the air, lowering its boiling point, which can easily lead to brake failure. Below is more information about Mazda: 1. Main Models: As of 2021, Mazda's global passenger vehicle lineup includes: SUV series CX-3, CX-30, CX-4, CX-5, CX-8, CX-9, MX-30; sedan series Mazda2, Mazda3 (also known as "Axela" by Changan Mazda), Mazda6 (known as "Atenza" by FAW Car); sports car MX-5. 2. Name Origin: The prophet Zoroaster founded an ancient religion in West Asia Persia, advocating the worship of the creator as the source of good, requiring people to have good thoughts, words, and actions, and to abandon evil. In this religious system, there is a deity named "Ahura-Mazda." Jujiro Matsuda used this as the company name, symbolizing the pursuit of light and goodness. Another theory is that "MAZDA" is the name of a great god who created iron and ancient wheel civilization, representing intelligence, reason, and harmony. 3. Logo Meaning: After Mazda partnered with Ford, it adopted a new logo featuring a seagull spreading its wings within an ellipse, also forming the letter "M." The "M" stands for "MAZDA," symbolizing the company's ambition to soar with infinite creativity and sincere service into the new century.
9
3
Share

How to reset the maintenance light on Mazda CX-30?

To reset the maintenance light on Mazda CX-30, you can go to the infotainment settings to set the maintenance mileage and time; or contact the after-sales service to connect the special equipment to the vehicle computer for reset; you can also go to the 4S store for maintenance to reset the maintenance light. Below is more information about Mazda CX-30: 1. Space: The CX-30 adopts the platform of Mazda 3 compact car, which has advantages in wheelbase and body size compared with Honda XR-V based on the small car platform. The wheelbase of CX-30 is 2653mm, and its rear space is one of the best in its class, comparable to Honda XR-V, and has more advantages in left-right and front-rear space than C-HR. 2. Body size: The length, width and height of CX-30 are 4395mm, 1795mm and 1540mm respectively. 3. Power: The maximum power of CX-30 is 158 horsepower, and the maximum torque is 202 N·m.
3
0
Share

What are the tips for the automatic transmission subject 2 driving test?

Here are the tips for the automatic transmission subject 2 driving test: 1. Parallel parking: Control the braking force well, because the car cannot come to a complete stop during the reversing process. Some places have now changed their policies to allow a temporary stop of no more than 2 seconds, but it still depends on the local test rules. Try to avoid stopping if possible. 2. Reversing into a garage: The key points are similar to parallel parking above, with no special precautions needed. 3. Curve driving: This is very simple for automatic transmission models. Just release the brake and let the car move forward automatically. As long as you control the direction well and don't cross the boundary line, you can pass.
6
1
Share

Why does the motorcycle lose power immediately after ignition?

There are two main reasons why a motorcycle loses power immediately after ignition. First, the battery may be severely aged or depleted, and the high current during ignition causes the battery to be overloaded and shut down directly. Second, the starter may have a short circuit or a mechanical part may be stuck, causing the starter to overload or stall, which pulls down the battery voltage and leads to a power loss. Below are some motorcycle maintenance tips: 1. Oil change interval: If using semi-synthetic oil, the replacement interval is generally 3,000 kilometers. It can be pushed to 4,000 kilometers, but to ensure the engine's longevity, it is recommended to change the oil every 3,000 kilometers. 2. Chain maintenance: Check the chain condition every 500 kilometers to see if it is loose or lacks lubrication. Every 5,000 kilometers, remove the chain for cleaning and lubrication. 3. Engine maintenance: At 6,000 kilometers on the odometer, which is when you change to the second bottle of semi-synthetic oil during normal driving, add an anti-wear agent to extend the engine's lifespan and improve the motorcycle's performance.
5
4
Share

Is the Maybach small window located on the door?

The small window of the Maybach is on the car, fixed on the C-pillar. Below is more information about Maybach: 1. Brand Background: Maybach (MAYBACH) was a luxury car brand and manufacturer active in Europe from 1921 to 1940, founded by Wilhelm Maybach in Germany in 1921. 2. Maybach S-Class: The Maybach S-Class uses three types of engines: a 3.0-liter turbocharged engine, a 4.0-liter turbocharged engine, and a 6.0-liter turbocharged engine. 3. New Maybach: The new generation Maybach features high-end equipment and exclusive options. The exterior design is more noble and elegant, highlighting the status of this legendary sedan. The newly designed large chrome radiator grille, front bumper with LED daytime running lights, deep red luxury taillights, and specially developed paint and new wheels for the new car all highlight its characteristics.
19
4
Share

Does carrying 5 people affect the new car break-in period?

It is acceptable to carry 5 people in a new car during the break-in period. As long as the maximum load capacity is not exceeded and driving safety is ensured, there should be no issues. The break-in period for a new car typically ranges between 2,500 to 3,000 kilometers. During this period, the engine speed should be maintained around 2,500 rpm to ensure proper contact, friction, and adaptation of all components. Speed requirements during the break-in period: 1. Initial phase: The first 500 kilometers constitute the initial break-in. During this phase, it is advisable not to drive too fast, keeping the speed below 70-80 km/h and the engine speed below 2,200 rpm. 2. Middle phase: From 500 to 1,000 kilometers is the middle break-in phase. The maximum speed can be moderately increased, generally up to 90-100 km/h, while keeping the engine speed below 2,500 rpm. 3. Final phase: From 1,000 to 1,500 kilometers is the final break-in phase. The speed can be increased to below 120 km/h. Since the break-in is a gradual process, it is essential to increase the load progressively. Ensure the engine speed does not exceed 3,000 rpm.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.