Is driving at 92 in an 80 speed limit considered speeding?

1 Answers
VanCameron
07/30/25 7:29am
Driving at 92 in an 80 speed limit is considered speeding. The speeding percentage is calculated as (92-80) ÷80×100%=12÷80×100%=15%. Additional information: 1. According to regulations, speeding less than 10% results in a warning without penalty points or fines; 2. Speeding between 10% and 20% incurs 3 penalty points and a fine; 3. Speeding between 20% and 50% incurs 6 penalty points and a fine; 4. Speeding over 50% results in 12 penalty points, a fine, temporary license suspension, and mandatory training.
Was this review help?
14
5
Share
More Forum Discussions

Is automotive urea solution harmful to the human body?

Automotive urea is not harmful to the human body, as it is not classified as a hazardous chemical and poses no harm to humans or the environment under normal usage. Here is relevant information: 1. Automotive urea is a liquid used in SCR technology to reduce nitrogen oxide emissions from diesel vehicles. It consists of 32.5% high-purity urea and 67.5% deionized water. 2. However, prolonged skin contact with automotive urea should be avoided, as it can release ammonia gas at high temperatures. Ammonia has corrosive properties, and prolonged exposure may lead to skin discoloration or ulcers.
19
1
Share

What is the function of spark plugs in sedans?

Function of spark plugs: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder. Composition of spark plugs: Spark plugs mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. Types of spark plugs: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs.
6
4
Share

Why won't the car window roll down?

The reasons and solutions for a car window not rolling down are as follows: 1. The battery is disconnected, or the power or ground wire of the window control module was disconnected during maintenance of other systems. Severe power loss when starting the engine may cause the initialization data of the window to be lost. The window lift system needs to be reset. Method: Turn on the ignition switch, pull the switch up and hold it. After the glass reaches the top, continue to hold for more than 3 seconds, then release the switch and immediately press and hold it to lower the glass to the bottom for more than 3 seconds. Repeat the upward action once more to complete the initialization process and restore the window lift function. 2. Excessive dust or dirt in the glass guide channel increases resistance. The dirt in the glass guide channel needs to be cleaned. Method: Insert chopsticks wrapped with a wet towel into the glass guide channel. Adjust the number of towel layers around the chopsticks according to the width of the guide channel to ensure moderate thickness. Move the towel up and down forcefully inside the guide channel to clean, and continuously remove the towel to wash off the dirt until no more dirt is cleaned.
1
0
Share

Can Uncomfortable Car Seats Be Replaced?

Car seats that are uncomfortable can be replaced, but it is important to consider whether the size of the seat and the position of the screw holes are suitable. Car seats can be categorized by shape into separate seats and bench seats; by function into fixed, removable, and adjustable seats; and by the number of passengers into single, double, and multi-person seats. Car seats should meet the following four conditions: 1. The arrangement of seats within the entire cabin should be reasonable, especially the driver's seat, which must be in the optimal position. 2. The design of the seat must conform to human physiological functions, striving for aesthetics while ensuring comfort. 3. The seat must be safe and reliable, with sufficient strength, stiffness, and durability, compact in structure, and with minimized weight as much as possible. 4. Various adjustment mechanisms designed to meet the comfort of drivers and passengers should have reliable locking devices to ensure safety.
5
5
Share

Which country does the Mustang brand belong to?

Mustang is an American brand, and it is a car under the American Ford Company. Here are some relevant details: 1. The 2020 Mustang has a body length of 4794mm, width of 1916mm, height of 1391mm, a wheelbase of 2720mm, a fuel tank capacity of 58.9 liters, and a curb weight of 1702kg. 2. The 2020 Mustang features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.3L turbocharged engine, delivering a maximum horsepower of 299ps, a maximum power of 220kw, and a maximum torque of 434nm. It is paired with a 10-speed automatic transmission.
20
0
Share

What to do if the mileage for the first maintenance is not enough?

The mileage for the first maintenance is not enough. After the due date, you can apply for a deferred maintenance by explaining the condition of the car. Subsequent maintenance should be done every 5,000 kilometers. The most important part of car maintenance is changing the engine oil and oil filter. The most frequently checked parts during car maintenance are the tire surface and pressure, oil level, coolant level, and brake fluid level. Information about the first maintenance is as follows: 1. The first maintenance time has two indicators: mileage and time, whichever comes first. Exceeding either one will affect the warranty. 2. The first maintenance time is calculated based on the date of car delivery. 3. It is better to drive at high speeds after the first maintenance. Because driving at high speeds actually means increasing the engine speed, which increases mechanical wear. The first batch of engine oil contains the most metal debris and impurities. Using this oil with a large amount of debris for high-speed driving will greatly increase engine wear.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.