Is driving at 90 in an 80 speed limit zone on the highway considered speeding?

1 Answers
McMicah
07/29/25 2:10pm
Driving at 90 in an 80 speed limit zone on the highway is considered speeding. Exceeding the speed limit from 80 to 90 will result in a 3-point deduction. According to the "Scoring Standards for Road Traffic Safety Violations," if a motor vehicle is driven on the highway at a speed exceeding the prescribed limit by less than 20%, the traffic management department of the public security organ will impose a 3-point penalty on the driver. Driving at 90 in an 80 zone exceeds the speed limit by 12.5%, hence the 3-point deduction. Introduction to penalties for speeding in highway interval speed detection: According to regulations, speeding less than 10%: a warning will be issued without point deduction or fine; speeding between 10% and 20%: 3 points will be deducted and a fine will be imposed; speeding between 20% and 50%: 6 points will be deducted and a fine will be imposed; speeding more than 50%: 12 points will be deducted, a fine will be imposed, the driver's license will be temporarily suspended, and the driver will be required to attend training.
Was this review help?
20
1
Share
More Forum Discussions

Will Manual Transmission Cars Be Phased Out?

Manual transmission will not be phased out. Here are the advantages of manual transmission: 1. Control of manual transmission: The control and driving experience of manual transmission are very strong. Automatic transmission cars have no control to speak of. While they are convenient, they lack the fun of manual transmission control. Additionally, manual transmission cars have better adaptability. On some complex roads, manual transmission performs better. Even in traffic jams or emergencies, manual transmission outperforms automatic transmission, which is why manual transmission continues to dominate the car market. 2. Lower cost of manual transmission cars: Manual transmission technology is relatively mature, with both the transmission and engine being more stable and mature, resulting in lower costs. Lower costs naturally lead to lower prices. For the same configuration, manual transmission cars are definitely cheaper than automatic transmission cars.
12
2
Share

How to Drive a Manual Transmission on the Highway?

Manual transmission driving method on the highway is: 1. After passing the toll station, gradually increase the throttle to shift up through the gears. When reaching 4th gear, continue pressing the accelerator; 2. Wait until the RPM reaches around 3500 and the speed exceeds 70 mph, then shift to 5th gear for cruising. Manual transmission requires manually moving the gear lever to change the gear engagement positions inside the transmission, altering the gear ratio to achieve speed variation. Introduction to manual transmission gears: 1. 1st gear: Starting gear, used for vehicle launch; 2. 2nd gear: Passing gear, used for navigating complex road surfaces and handling complicated situations; 3. 3rd gear: Transition gear, used for low-speed urban driving; 4. 4th gear: Cruising gear, used for prolonged high-speed driving; 5. 5th gear: High-speed gear, used for long-distance highway travel.
7
1
Share

How to adjust the date on BYD F3?

The method to adjust the date on BYD F3 is: 1. Click the settings icon in the lower right corner of the display; 2. Locate the date and time option on the display to make adjustments. The BYD F3 is a compact car under the BYD brand. Taking the 2020 BYD F3 Classic as an example, its body dimensions are: length 4533mm, width 1705mm, height 1490mm, with a wheelbase of 2600mm and a fuel tank capacity of 50 liters. The 2020 BYD F3 Classic is equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission, delivering a maximum horsepower of 109 hp, a maximum power of 80 kW, and a maximum power speed of 5800 rpm.
13
0
Share

What is the difference between 4LLc and 4HLc?

4HLc stands for High-speed Four-Wheel Drive with Central Differential System, while 4LLc represents Low-speed Four-Wheel Drive with Central Differential System. Below are the detailed differences between the two: 1. 4HLc: This mode indicates High-speed Four-Wheel Drive with Central Differential System. When encountering snowy or icy road conditions, drivers should switch to this mode, which provides excellent traction and superior handling performance. In "4HLC" mode, the speed should be kept below 40 km/h. 2. 4LLc: This mode stands for Low-speed Four-Wheel Drive with Central Differential System and is designed for extremely harsh environments such as marshes or deserts. 3. Letter meanings: H stands for High-speed; L stands for Low-speed; LC represents Central Differential Lock. 4H: This denotes Four-Wheel Drive mode. When driving in rainy conditions, switching to this mode ensures stable directional performance and excellent handling. Drivers should note that in "4H" mode, the speed should be maintained below 100 km/h.
9
2
Share

How to Check If Your Car Has Been Towed?

If your car has been towed, you can call the 122 police hotline to confirm whether it was towed due to a traffic violation. If so, you can inquire with the police about the towing location and the process for handling the violation. Here is additional information: 1. Relevant regulations: When dealing with illegal parking, traffic police are not obligated to notify the vehicle owner before towing the car. According to Article 31 of the 'Procedural Regulations for Handling Road Traffic Safety Violations,' if a vehicle violates parking or temporary stopping regulations, and the driver is not present or refuses to leave immediately, obstructing other vehicles or pedestrians, traffic authorities or officers may tow the vehicle to a location that does not obstruct traffic or to a designated area. During the towing process, officers must document the violation and evidence through photos or videos. 2. 122 hotline: 122 is a national traffic management department hotline established to handle public reports of traffic accidents, requests for assistance, complaints about traffic management or officer conduct, and inquiries.
10
3
Share

Can You Still Drive with a Noisy Tensioner Pulley?

You should not drive with a noisy tensioner pulley. The tensioner pulley contains bearings, and if there is abnormal noise, it indicates that the bearings are damaged. This may lead to timing belt/chain misalignment, ignition and valve timing issues, affecting the normal operation of the vehicle. Below is additional information: 1. Maintain Tension: The tensioner pulley directly contacts the timing belt or chain to ensure proper tension during operation, preventing slippage, misalignment, or loosening, and reducing wear on the sprockets and chain. 2. Adjust Tightness: It is used to adjust the tightness of the timing belt, but its lifespan is relatively short. Many vehicles experience tensioner pulley failure before the belt wears out. Generally, the tensioner pulley is replaced along with the timing belt. 3. Replacement Interval: It is recommended to replace the tensioner pulley every 3-5 years or 80,000-100,000 kilometers. Refer to the vehicle's maintenance manual for specific replacement intervals.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.