Is driving at 80 km/h considered fast?

What procedures are required for vehicle emblem replacement?

The procedures required for vehicle emblem replacement include: ID card, vehicle license, motor vehicle modification registration application form, motor vehicle registration certificate, etc., to be processed at the local vehicle management office or environmental protection bureau where the vehicle is registered. The specific process is as follows: 1. At the time of vehicle inspection, bring your ID card, vehicle license, and the current valid compulsory traffic insurance policy to the vehicle management office for processing. 2. Upon arrival at the vehicle management office, go to the designated window (each vehicle management office has a special window for handling exempted inspection vehicles) and submit the documents to the staff. After the staff enters the information, you can proceed to the next window to directly receive the annual inspection sticker and environmental protection sticker. 3. The annual inspection sticker and green environmental protection sticker for exempted inspection vehicles are issued free of charge. However, a copy of the vehicle license is required for each sticker, which can be prepared in advance. 4. Plan your time reasonably. The exempted inspection stickers can be applied for 60 days in advance. If overdue, a fine of 200 yuan and 3 penalty points will be imposed. 5. Before receiving the stickers, check if there are any illegal records for the vehicle. If there are, they must be dealt with first; otherwise, the processing will not be completed.

9

2

Share

What grade of gasoline should a Lexus ES300h use?

It is recommended to use 95 or higher octane fuel. The engine compression ratio of the ES300h is 14:1, and 95 octane gasoline is suggested for compression ratios above 10. The reasons for high fuel consumption are as follows: Tire factors: Tires are relatively easy to check, so they should be inspected first. If the tire pressure is insufficient, fuel consumption will increase. If the tire pressure is normal, then check the wear level of the tires. Severe tire wear can lead to frequent slipping, which also increases fuel consumption. Excessive engine carbon buildup: If there is a significant amount of carbon buildup in the engine over a short period, it can also cause high fuel consumption. This situation is likely due to the use of substandard fuel. The solution is to add a certain amount of cleaner when refueling. If the effect is not noticeable, it indicates a large amount of carbon buildup in the engine, in which case it is best to take the car to a 4S shop or repair shop for the technician to clean the carbon deposits inside the engine. Oxygen sensor damage: As an internal control unit of the car, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the engine's air-fuel ratio, inevitably leading to abnormally high fuel consumption. When the vehicle is running, the exhaust pipe will emit darker-colored exhaust gases. In this case, the oxygen sensor should be replaced as soon as possible.

2

5

Share

What to Do When the Brake Suddenly Becomes Hard and Unpressable During Startup?

Possible causes are as follows: 1. Related to pressing the brake before turning off the engine; the car's braking system works best when the engine is running, and the brake booster is the key component that amplifies the force applied to the pedal. When the engine is off, the brake booster stops functioning, and usually, after pressing the brake pedal three times, the remaining vacuum force is depleted, making the brake feel hard due to the lack of assistance. 2. The car's brake booster is leaking or malfunctioning. If you haven't pressed the brake pedal after turning off the engine or notice that the brake pedal is hard to press while driving, it's likely due to a faulty brake booster, possibly caused by a leak or blockage in the vacuum tube. Solutions are as follows: 1. If this issue is noticed before driving, it's safer to avoid driving and take the car to a repair shop for inspection. If it occurs while driving, stay calm, slow down, and stop the car. Try pressing the pedal multiple times to see if braking can be restored; applying more force usually allows some braking power. 2. For this scenario, simply restart the engine and press the brake pedal firmly to reactivate the system. Once the engine is running, the brake booster will resume functioning, and the brake pedal will return to normal.

11

0

Share

Why was the Magotan GTE discontinued?

The reasons for the discontinuation of the Magotan GTE: It is an oil-to-electric conversion model: Oil-to-electric conversion refers to modifying a fuel-powered vehicle into a pure electric or plug-in hybrid model based on its original structure. The Magotan GTE was modified from the fuel-powered Magotan, making it an oil-to-electric conversion model. The reason why people generally dislike oil-to-electric conversion models is that, to reduce costs, manufacturers avoid making significant changes to the original structure. This results in limited space for larger batteries and motors, forcing them to be inserted in a scattered layout, which to some extent is unfavorable for battery temperature control. Small trunk volume: As mentioned above, the biggest issue with oil-to-electric conversion models is space. To accommodate the battery and motor, the Magotan GTE sacrificed some trunk space. Its luggage capacity is only 457L, far less than the fuel version's 533L. Additionally, the biggest problem with the Magotan GTE's trunk is its low height, making it difficult to fit larger suitcases. Noticeable jerking with the six-speed wet dual-clutch transmission: Hybrid models are generally known for their smooth and quiet performance. However, due to the use of a six-speed wet dual-clutch transmission in the Magotan GTE, vibrations occur during power transitions, primarily at low to medium speeds. In terms of smoothness, the Magotan GTE is far inferior to hybrid models like the Camry Hybrid and Accord Hybrid.

11

5

Share

What is the difference between a mechanical torque-sensing limited-slip differential and a Torsen differential?

The differences between a mechanical torque-sensing limited-slip differential and a Torsen differential are as follows: 1. Different nature: Torsen differential: When the differential torque inside the differential is small, it functions as a differential. When the differential torque becomes too large, the differential automatically locks, effectively improving the vehicle's off-road capability. Off-road vehicles with only electronic limited-slip are suitable for snowy or icy roads and light off-roading but not for extreme off-roading. 2. Different principles: Torsen differential principle: It uses the high internal friction torque (Mr) of the worm gear transmission pair for torque distribution. The internal friction torque (mr) depends on the relative speed of the output shafts at both ends. When the relative speed difference between the two output shafts is small, the friction force of the worm driven by the rear worm gear is also small. The differential spur gear absorbs the speed difference between the two output shafts. The mechanical limited-slip differential prevents tire slippage through mechanical principles, distributing driving force evenly to all four tires. Such off-road vehicles can handle high-intensity and long-duration off-roading and are among the most professional off-road vehicles. 3. Different meanings: The Torsen differential achieves constant, continuous torque control management, operates continuously without delay, but does not interfere with the adjustment of total torque output, resulting in no torque loss. There are many working principles for mechanical limited-slip differentials, the most common being differential locks—front, rear, and center. Vehicles with three locks include the Jeep Wrangler, Toyota Land Cruiser, Mercedes-Benz M-Class and G-Class, Land Rover Range Rover, Beijing Jeep, and Great Wall Haval H9, among others.

18

5

Share

Can I Renew My Driver's License in Advance?

Yes, you can renew your driver's license in advance. Article 57 of the "Traffic Regulations and Penalty Points Rules" states: A motor vehicle driver shall apply for license renewal at the vehicle management office of the issuing authority or another jurisdiction within 90 days before the expiration of the current driver's license. If your driver's license has expired, traffic police may impose a fine but will not deduct points. There is a latest deadline for license renewal: if the license has been expired for less than one year, you can follow the normal renewal process; if it has been expired for one to three years, the license will be canceled, but you can regain it by passing the subject one exam; if it has been expired for more than three years, the license will be canceled. Regulations: A motor vehicle driver shall apply for license renewal at the vehicle management office of the issuing authority or another jurisdiction within 90 days before the expiration of the current driver's license. When applying, you must fill out an application form and submit the following documents and proofs: the driver's identity proof, the current driver's license, and a medical fitness certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. For applicants applying for a special small automatic passenger vehicle for the disabled, a medical fitness certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. Materials required for license renewal: original ID card and its copy, a qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, a completed license renewal application form, and the processing fee. Photos and medical examination proofs for renewal can be brought by yourself. If you are concerned about their validity, you can have them processed directly at the traffic police office to avoid delays. Relevant matters for renewing an expired driver's license: About renewal: For annual review and renewal of an expired driver's license, the old license must be surrendered to the vehicle management office. Before renewal, all traffic violation records associated with the license must be resolved; otherwise, the application will not be accepted. Renewal of a motor vehicle driver's license can be done through the mobile app "Traffic Management 12123," the vehicle management office, or the public security authorities.

16

4

Share

Is driving at 80 km/h considered fast?

What procedures are required for vehicle emblem replacement?

What grade of gasoline should a Lexus ES300h use?

What to Do When the Brake Suddenly Becomes Hard and Unpressable During Startup?

Why was the Magotan GTE discontinued?

What is the difference between a mechanical torque-sensing limited-slip differential and a Torsen differential?

Can I Renew My Driver's License in Advance?

What is the yield strength of the Tourneo body steel?

Which factory produces the domestic BMW X3?

Can antifreeze of different colors be mixed?

What Type of Engine Oil Should a China VI Honda Civic Use?