Is driving at 70 in a 60 km/h urban speed limit considered speeding?

1 Answers
JulianaLynn
07/29/25 6:51pm
Driving at 70 in a 60 km/h urban speed limit is considered speeding. Here is an introduction to the content related to maximum speed: Maximum speed test: The maximum speed is the highest driving speed a car can achieve under windless conditions on a level, good-quality asphalt or concrete road. According to Chinese regulations, the last 500 meters of a 1.6-kilometer test section are used as the test area for maximum speed, with four round trips conducted to obtain an average value. Maximum speed limitation: The maximum speed is different from the theoretical maximum speed (which refers to the best performance achieved by the engine under optimal conditions, limited to theory). For some high-performance cars, manufacturers often use technical means (such as electronic speed limiters) to restrict the vehicle's maximum speed to protect the engine or comply with traffic regulations.
Was this review help?
2
3
Share
More Forum Discussions

Can Windshield Washer Fluid Be Used to Wash the Car Body?

Windshield washer fluid can be used to wash the car body after dilution. Windshield washer fluid is primarily designed for cleaning glass and has limited effectiveness in cleaning car paint. Functions of Windshield Washer Fluid: High-quality windshield washer fluid is made from deionized water and various environmentally friendly additives, featuring functions such as dirt removal, antifreeze, antistatic, and anticorrosion. Some premium windshield washer fluids also offer quick snow and ice melting, anti-glare, and anti-fog properties, significantly enhancing driving safety. Precautions for Car Washing: Avoid washing the car under direct sunlight, as this can leave dried water spot marks on the body. Avoid washing the car in extremely cold weather, as water freezing can cause the paint film to crack. Avoid washing the car before the engine has completely cooled down, as this can lead to premature engine aging. Avoid using high-pressure water streams to wash the car body, as excessive water pressure can damage the paint surface. If there is stubborn dirt or mud on the car body, soak it with water first before rinsing.
18
0
Share

What are the penalties for reckless lane changing on highways?

Reckless lane changing on highways will result in a penalty of 3 demerit points on the driver's license. Precautions for lane changing on highways: Must use turn signals before changing lanes: Before changing lanes, promptly use the turn signal to indicate to other vehicles; Observe surrounding vehicles to ensure a safe distance: Check the rearview mirror to determine if the road conditions are suitable for lane changing; Steer gently and change lanes quickly: The speed during the lane change should not decrease but should remain constant or slightly accelerate. Precautions for driving on highways: Before driving, the driver should conduct a comprehensive inspection of the vehicle, with particular attention to various fluids, tires, braking system, etc. Top up any fluids that are low to the appropriate level; Tires should be inspected carefully, and any debris in the tread should be removed. When merging into highway traffic from an on-ramp, always yield, use the turn signal, honk the horn, observe, and confirm that it does not affect other vehicles before entering the highway traffic lane.
10
0
Share

Is Driving on Steep Slopes Harmful to CVT Transmissions?

Driving on steep slopes can be somewhat harmful to CVT transmissions. Reasons why steep slopes are harmful to CVT transmissions: The internal structure of a CVT transmission is relatively simple, consisting mainly of two cone pulleys and a steel belt or chain. The CVT transmission relies on this steel belt or chain for power transmission. When the vehicle is under heavy load, the friction between the belt or chain during transmission increases. Due to the absence of a gear structure, the belt or chain may slip or even break. Tips for driving a CVT transmission on steep slopes: When climbing steep slopes with a CVT-equipped vehicle, it's important to assess the slope to decide whether to use the S (Sport) mode or L (Low) mode. If you feel the vehicle struggling while in D (Drive) mode, switch to S mode. If S mode doesn't provide enough power for the climb, then switch to L mode. Shifting from D to S and then from S to L can significantly increase the engine's RPM and torque, providing the wheels with greater power in a short period.
9
2
Share

What is the Structural Principle of a Compressor?

After being cooled and condensed into a high-pressure, low-temperature liquid through the condenser's cooling tubes, it passes through the receiver-drier for dehumidification and buffering, then flows to the expansion valve at a relatively stable pressure and flow rate. After throttling and pressure reduction, it finally flows into the evaporator. The refrigerant evaporates immediately upon encountering the low-pressure environment, absorbing a large amount of thermal energy. Below is a detailed explanation regarding the compressor: Classification: Air conditioning compressors can be divided into fixed-displacement compressors and variable-displacement compressors. Function: The air conditioning compressor plays the role of compressing and driving the refrigerant in the air conditioning refrigerant circuit. The working circuit is divided into an evaporation zone (low-pressure zone) and a condensation zone (high-pressure zone). The indoor unit and outdoor unit belong to the high-pressure or low-pressure zone respectively (depending on the working state), and the compressor is generally installed in the outdoor unit. The compressor draws the refrigerant from the low-pressure zone, compresses it, and sends it to the high-pressure zone for cooling and condensation, where the heat is dissipated into the air through the radiator fins, and the refrigerant changes from a gaseous state to a liquid state, with increased pressure. The refrigerant then flows from the high-pressure zone to the low-pressure zone, where it is sprayed into the evaporator through the capillary tube, causing a sudden pressure drop, and the liquid refrigerant immediately turns into a gaseous state, absorbing a large amount of heat from the air through the radiator fins. As the machine continuously operates, it absorbs heat from the low-pressure zone into the refrigerant and then releases it into the air in the high-pressure zone, thereby regulating the temperature.
3
4
Share

Can the diversion line at the highway exit be crossed?

The diversion line at the highway exit cannot be crossed. Purpose of the diversion line: Diversion lines are one of the most common road markings, primarily used at complex intersections to help drivers find the correct driving direction, ensuring each vehicle stays in its designated lane. They serve to regulate, guide, and warn traffic, thereby reducing accidents. Penalties for crossing the diversion line: According to traffic laws, diversion lines are a type of prohibited marking. Vehicles must follow the designated route and are not allowed to cross or drive over the lines. Additionally, making U-turns or parking in the diversion line area is prohibited. Violations can result in a 3-point penalty on the driver's license and a fine.
20
4
Share

What is Bridgestone Tire

Bridgestone is a tire brand under Roadtaler, which is a Sino-Korean joint venture tire brand. Functions of tires: Automobile tires are one of the important components of a vehicle. They directly contact the road surface and work together with the suspension system to absorb shocks during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and off-road capabilities. Precautions for tire usage: All tires on the vehicle, including the spare tire, must be inspected monthly. During inspection, observe the tire surface for cracks or scratches. It is best to wear gloves and check the inner side of the tire for any suspicious marks. If any suspicious signs are found, immediately have a detailed inspection performed by a professional mechanic.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.