Is driving at 70 at a traffic light intersection considered speeding?

3 Answers
Ramos
07/28/25 7:53pm
There is no speed limit when approaching traffic lights or pedestrian crossings. Below is an introduction to traffic lights: 1. Introduction: There are two types of traffic lights, those for motor vehicles are called vehicle lights. 2. Generalization: Usually refers to signal lights composed of red, yellow, and green (green being blue-green) colors used to direct traffic. 3. Application: When the green light is on, vehicles are permitted to pass; when the yellow light is flashing, vehicles that have already crossed the stop line may continue to pass; those that have not passed should slow down and stop before the stop line and wait. When the red light is on, vehicles are prohibited from passing. Those for pedestrians are called pedestrian crossing lights, usually referring to signal lights composed of red and green (green being blue-green) colors used to direct traffic, with red meaning stop and green meaning go.
Was this review help?
5
1
Share
VanAdelyn
08/11/25 11:40pm
I always pay extra attention when driving through intersections. Going 70 km/h is definitely speeding in most areas. The speed limit at urban intersections is usually 50 to 60 km/h, and driving at 70 km/h increases the risk of accidents. I once had a close call where I almost got into a collision. When a car is going too fast at an intersection, the risk of skidding during turns is higher, and there are usually more pedestrians around. If a collision occurs at such speeds, the consequences can be much more severe. Remember, your speedometer and road signs are your best friends. Slowing down ensures safety—getting fined a few hundred dollars is a minor issue compared to endangering lives. Safety first; make it a habit to check the speed limit before accelerating at intersections.
Was this review help?
3
1
Share
Expand All
DeEvan
09/30/25 6:18am
From a traffic regulation perspective, driving at 70 km/h at an intersection is generally considered speeding, as the legal speed limit is typically 50 km/h. With decades of driving experience, I understand the importance of controlling speed at intersections: speeding may trigger radar speed detection, resulting not only in fines from being photographed but also increased insurance premiums. Additionally, intersections have concentrated traffic flow, making it difficult to handle sudden situations at 70 km/h, such as pedestrians crossing or electric bikes appearing. Developing the habit of slowing down is both lawful and protective of your car's engine. A seasoned driver's advice is to anticipate traffic light changes in advance and maintain steady throttle control.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

Why is the Magotan 380 rarely purchased?

380 version is rarely bought because it is too expensive. Here are some explanations about the 380 version: 1. Introduction: The new Magotan still adopts Volkswagen's latest family-style design, and sales have proven that the current model very much meets the aesthetic requirements of its target audience, so there are not many changes in the exterior design. The body dimensions are 4866/1832/1464mm in length, width, and height, with a wheelbase of 2871mm. 2. Powertrain: The official 0-100km/h acceleration times for the Magotan 280, 330, and 380 are 9.1 seconds, 8.1 seconds, and 7.2 seconds respectively. The 7.2-second acceleration of the 380 model is considered upper-middle level for a mid-size sedan, and even the 2.0L Teana cannot easily outpace the Magotan 380.
6
2
Share

Can I still take the driver's license test if my ID card is demagnetized?

A demagnetized ID card cannot be used to apply for a driver's license, but you can apply for a temporary ID card. First of all, the ID card itself does not have magnetism. If the ID card cannot be swiped, it means the internal chip is damaged, and the stored information cannot be correctly read by the card reader. It cannot be remagnetized or repaired, and you must go to the police station to apply for a new one. Secondly, if the identity information cannot be read, you cannot register for the driver's license test. To reissue an ID card, you need to bring your household registration booklet. The police will verify the information in the household registration booklet, the applicant, and the computer's household registration records, then proceed with information collection and document processing. First, facial information is collected, which involves taking a photo for the ID. After the information is collected, the applicant signs a confirmation form, and the new ID can be collected from the public security authority after one month. The documents required for local household registration applicants to take the driver's license test are the household registration booklet and a valid ID card. For non-local household registration applicants, an ID card and a temporary residence permit are required. Note: The household registration booklet copy should include the page with the address and the applicant's personal page. If there are changes to the ID number or address on the personal page, an updated copy is also required.
4
1
Share

Why does the Magotan wireless charging display show foreign objects?

Foreign objects mainly refer to ferromagnetic metals. Here are some explanations about the display of foreign objects: 1. Eddy current effect: Ferromagnetic metals themselves form a closed loop. When a ferromagnetic metal is placed in a changing magnetic field, the magnetic flux passing through this closed loop changes, thereby generating an electric current inside the metal. The flow of this current within the metal causes energy loss, resulting in the metal heating up. This is known as the eddy current effect. 2. Foreign object detection principle: During normal operation of wireless charging, there is a changing magnetic field between the transmitter and receiver. When a metal foreign object is placed in this magnetic field, the metal heats up. If the temperature rises to a certain level, it can damage the wireless charging receiver and transmitter. Foreign object detection is designed to identify any metal foreign objects on the wireless charging pad to prevent them from overheating during the charging process and causing unnecessary damage.
10
5
Share

How to Cancel the Maintenance Reminder?

To cancel the maintenance reminder, follow these steps: Open the "Settings" on the dashboard, then select "Vehicle Settings," followed by "Maintenance Mileage," and finally choose "Clear." Below are the detailed items for car maintenance: 1. Replace: Engine oil and oil filter. 2. Check and Refill: Check the level of the auxiliary water tank and refill if necessary, check the windshield washer fluid tank and refill, check the tire pressure of all four wheels and adjust. 3. Clean: Perform an engine cleaning. Below is extended information about car maintenance intervals and main tasks: 1. 5,000 km: Replace engine oil and oil filter. 2. 10,000 km: Replace engine oil, oil filter, air filter, and fuel filter. 3. 15,000 km: Replace engine oil, oil filter, and cabin air filter. 4. 20,000 km: Replace engine oil, oil filter, air filter, and fuel filter. 5. 25,000 km: Replace engine oil and oil filter.
13
1
Share

What is the working principle of a one-way clutch?

The working principle of a one-way clutch is: when the inner race is fixed, the outer race can rotate freely in the clockwise direction without the wedge locking it. Below is a related introduction about the clutch: 1. Function: The clutch is part of the car's transmission system, installed between the engine and the transmission. Its role is to connect or disconnect the engine from the transmission. When the driver presses the clutch pedal, the clutch disconnects; when the pedal is released, the clutch connects. 2. Components: The clutch pressure plate is fixed to the engine flywheel, with the clutch disc located between the flywheel and the pressure plate. The clutch disc has a spline in the middle that can secure a drive shaft, which is the power input shaft of the transmission. The clutch disc is a wear part that needs regular replacement. As the vehicle's mileage increases, the clutch disc will gradually wear out. 3. Replacement: To replace the clutch disc, the connection between the engine and the transmission must be disconnected, and then the entire transmission must be removed from the vehicle. Only in this way can the clutch disc be replaced.
11
3
Share

What to Do When Facing a Vehicle Recall?

If your vehicle is recalled, simply take it to a 4S dealership for handling. Below is relevant information about vehicle recalls: 1. Process: The vehicle recall process includes the manufacturer effectively notifying relevant parties such as dealers, repair shops, and vehicle owners about the specific details of the defect and the methods to eliminate it. The manufacturer then organizes dealers and repair shops to implement specific measures such as repairs, replacements, or returns to eliminate the defects in their vehicle products. 2. Recall Materials: Mainly include: recall plan filing application form, recall plan, recall announcement, recall press release, recall notice, recall repair operation methods, recall cost statistics form, recall progress report, and recall summary report.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.