Is driving at 107 km/h on a highway with a 100 km/h speed limit considered speeding?

1 Answers
DiPenelope
07/29/25 1:47pm
Driving at 107 km/h on a highway with a 100 km/h speed limit is considered speeding. Here are the specific details: 1. Speed limit regulations: A speed limit refers to the prescribed maximum driving speed for a certain length of road segment, serving as a reminder for drivers to reasonably control their speed when traveling on that section. Exceeding the prescribed speed constitutes speeding, and drivers must strictly adhere to the designated speed limits while on the road. 2. Purpose of speed limits: To prevent dangers caused by speeding and maintain normal and stable road conditions, speed limits are implemented for specific road segments. These limits are based on factors such as the number of lanes, types of vehicles, traffic flow, etc., within a certain period, to establish safe and reasonable speed requirements. 3. Specific speed limit values: Typically, the specific speed limit values can be communicated to drivers entering the segment through electronic navigation or road signs. Generally, speed limits on highways range from 60 km/h to 120 km/h, while those on primary roads range from 60 km/h to 100 km/h.
Was this review help?
14
2
Share
More Forum Discussions

What Items Are Included in the Second Maintenance?

The items included in the second maintenance are as follows: 1. After the engine undergoes the three-cleaning and three-filtering process, it should start easily, run smoothly, have normal exhaust, meet the requirements for water temperature and oil pressure, maintain steady RPM, produce no abnormal noises, have properly tensioned belts, and show no signs of four leaks; 2. The steering free travel and toe-in should meet the requirements, ensuring the steering is light, flexible, and reliable, with no front-wheel wobbling or deviation during driving; 3. The clutch free travel should meet the requirements, ensuring easy operation, complete separation, smooth and reliable engagement, no abnormal noises, and no oil leaks in the hydraulic system; 4. The transmission, drive axle, universal joint transmission device, etc., should be well-lubricated, securely connected, free of abnormal noises and overheating, not jump gears, shift smoothly, and have no oil leaks; 5. The brake pedal free travel and brake clearance should meet the requirements, ensuring good service and parking brakes, no deviation or dragging during braking, proper operation of the inertia proportioning valve, and no oil leaks.
9
4
Share

How long does it take to charge the Roewe e50?

Roewe e50 charging time is 5-6 hours for slow charging and about 30 minutes for fast charging. The details are as follows: Slow charging: The Roewe E50 has two charging methods: fast and slow. Slow charging can be done using a household 220V socket, with a charging time of approximately 5-6 hours. Fast charging: Fast charging can charge the battery to 80% in 30 minutes. It is recommended to charge during the day to better manage the time. After six months of battery usage, it is advised to perform a deep discharge of the battery once a month. Specific data of Roewe: The Roewe e50 is a microcar under the SAIC Group. The car has a length, width, and height of 3569mm, 1551mm, and 1540mm respectively, with a wheelbase of 2305mm. The body type is a 3-door, 4-seat hatchback, and the transmission is an electric single-speed transmission. The car's engine is a pure electric 71-horsepower motor, with a maximum horsepower of 71ps, a maximum power of 52kw, and a maximum torque of 155nm.
2
3
Share

Which button controls the wiper on a Mercedes-Benz car on rainy days?

The wiper of a Mercedes-Benz is integrated into the turn signal lever on the left side of the steering wheel. Due to the column shifter design of Mercedes-Benz models, the wiper switch control is integrated into the turn signal lever on the left side of the steering wheel. Wiper speed adjustment: Pushing the switch downward increases the wiper speed. Working principle: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives the four-link mechanism, which converts continuous rotational motion into a left-right swinging motion. The wiper motor adopts a 3-brush structure to facilitate speed adjustment. The intermittent time is controlled by the intermittent relay, which uses the motor's return switch contacts and the charging-discharging function of the relay's resistor-capacitor to make the wiper sweep at a certain cycle. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass. The blade rubber is pressed against the glass surface by a spring strip, and its lip must match the angle of the glass to achieve the required performance.
10
2
Share

What items are generally included in the first maintenance of a new car?

New car first maintenance generally includes the following items: 1. Replace engine oil, oil filter and air filter. 2. Check the working condition of the engine, such as whether the pipeline connection is normal, whether there are leakage points, whether the engine sound is normal, and whether there are abnormal noises. 3. Check whether the coolant content is at a normal level. 4. Check the wear degree of brake pads and tires, as well as the tire pressure condition. 5. Check whether there are scratches or corrosion on chassis components. 6. Check the remaining amount of power steering fluid and whether there is oil leakage at each oil pipe interface. 7. Comprehensive cleaning of the vehicle, including the engine compartment, body and interior.
13
2
Share

How Many Kilometers to Change Transmission Oil for a Car?

Car transmission oil should be changed every two years or 40,000 kilometers. Here is the relevant information: 1. The frequency of changing transmission oil varies for different car models. For manual transmission cars, the transmission oil is only used for lubrication, and the gear precision requirements for manual transmissions are not high, so slightly inferior transmission oil has little impact. 2. Automatic transmission cars have more complex transmissions with higher operational requirements. Here, the transmission oil serves more purposes than in manual transmission cars. Therefore, if the transmission oil becomes dirty and impurities increase, it will accelerate transmission wear and reduce shifting speed.
5
3
Share

Where is Kia Motors produced?

Kia Motors has multiple production sites worldwide, with its current Chinese factory located in Yancheng City, Jiangsu Province. Here is more information about Kia Motors: 1. Kia Motors (China) has proposed the service concept of "Family-Like-Care". Not only do the two high-end models, the Cadenza and the Mohave, come with a "five-year unlimited mileage" warranty, but the company also offers a "personalized" 24-hour nationwide road rescue service for all vehicle models. 2. Kia Motors currently offers five models to the Chinese market: the OPIRUS (Opirus), SORENTO (Sorento), SPORTAGE (Sportage), CARENS (Carens), and VQ (VQ).
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.