Is driving a pickup truck at 120 km/h on the highway considered speeding?

2 Answers
DeMicah
07/29/25 2:54am
Driving a pickup truck at 120 km/h on the highway is considered speeding. On highways, the maximum speed limit for small passenger vehicles is 120 km/h, while the speed limit for trucks is 100 km/h. Since pickup trucks are classified under the truck category, they must adhere to the truck speed limit standard, meaning their speed should not exceed 100 km/h. Even blue-plate pickup trucks are subject to the same 100 km/h speed limit on highways. If the speeding exceeds 50% or more, the driver will face an immediate deduction of 12 points from their license. Additional information: Below are some traffic regulations related to highway driving: 1. Maximum speed: On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h; for other motor vehicles, it must not exceed 100 km/h; and for motorcycles, it must not exceed 80 km/h. 2. Penalties for speeding: For small vehicles, speeding less than 20% results in a warning; speeding between 20% and 50% incurs a fine of 200 yuan and a deduction of 3 points; speeding between 50% and 70% incurs a fine of 1,000 yuan and a deduction of 6 points or possible revocation of the driver's license; speeding over 70% incurs a fine of 2,000 yuan and revocation of the driver's license.
Was this review help?
2
2
Share
LilyLynn
08/12/25 6:48am
I think driving a pickup truck at 120 km/h on the highway is definitely speeding. Based on my years of driving experience, pickup trucks are classified as light trucks, and the highway speed limit is usually 100 km/h. Driving at 120 km/h exceeds the limit by 20%, which according to traffic regulations, would result in 6 penalty points and a fine starting from 200 yuan. It's easy to get caught by speed cameras. Pickup trucks have a high center of gravity and are unstable at high speeds, with significant wind resistance making them prone to rollovers. I've experienced the steering wheel shaking and feeling unstable when driving too fast before. I recommend checking the local highway speed limit signs before driving. Safety should always come first—don't rush. Getting into an accident means dealing with repairs, compensation, and a lot of hassle and time wasted.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the child lock located on the Ford Escort?

The child lock of the Ford Escort is located on the side of the rear door. There is a small switch below the door lock. The rotary child safety lock requires inserting a key into the corresponding hole to rotate the knob switch for locking and unlocking operations. Below is more information about the child safety lock: 1. The child safety lock is used for the rear doors of the vehicle to prevent the danger of opening the door from inside while the vehicle is moving. When this device is activated, even if the electronic central door lock is opened, the device remains in the locked state. To open the rear door, you can only use the switch on the outside of the door when the central door lock is unlocked. 2. To ensure the safety of children during the ride, the child safety locks on both rear doors should be engaged. Once the child safety locks are engaged, no matter how much the child moves around in the back seat, they cannot open the door from inside. This ensures the child's safety and allows the driver to focus on driving.
13
4
Share

How to Check the Fuel Level in the Chevrolet Cavalier?

The Chevrolet Cavalier has a fuel tank capacity of 42L, and the remaining fuel level can be checked on the dashboard. Below is more information about the Chevrolet Cavalier: 1. The English name of the Cavalier, "Cavalier," means "knight," originating from the historically popular compact model Chevrolet Cavalier in General Motors' North American market. The front face of the Cavalier features Chevrolet's signature dual-layer front grille. The headlight assembly includes chrome trim and an innovative double-L-shaped LED daytime running light strip, which is standard across all models. 2. On March 27, 2018, the Cavalier 325T was officially launched. It is equipped with a new-generation Ecotec 1.0T dual-injection turbocharged engine and a 6-speed wet dual-clutch transmission with intelligent start-stop. This new powertrain combination in the Cavalier 325T delivers a maximum power of 88 kW, a maximum torque of 165 Nm, and a combined fuel consumption of only 5.0L per 100 km.
20
0
Share

What are the symptoms of a faulty car air conditioning relay?

When a car's air conditioning relay fails, the following symptoms may occur: 1. Faulty vehicle air conditioning relay: The vehicle's air conditioning system fails to start, and the compressor cannot operate. Even if the air conditioning occasionally starts, it will not provide cooling. 2. After power is applied, the refrigeration compressor does not work. When testing the adjustment components, if the relay does not engage, it indicates a relay malfunction. Use a multimeter to check whether the power supply circuit is normal. 3. Causes of relay damage: Poor contact of the relay's contacts (due to high-temperature burning or contamination). 4. If there is virtual soldering or desoldering of the relay's pins, the relay should be re-soldered or replaced immediately.
9
1
Share

Is the Toyota M20E engine imported?

M20C engine is domestically produced, not imported. Here is the relevant information: 1. The Toyota M20C engine has a maximum power of 131kW, a peak torque of 207N.m, and a displacement of 2.0L. The Toyota M20C adopts a modular design, featuring a bore-stroke ratio of 1:1.2, a compression ratio of 13:1, and a 41° intake and exhaust valve angle, among other modular designs. 2. To achieve higher thermal efficiency, the Toyota M20C engine's bore-stroke is set to 80.5×97.6 (mm) for a long-stroke configuration, combined with a high compression ratio of 13:1, reducing fuel consumption and emissions. 3. An engine (Engine) is a machine that can convert one form of energy into another, typically transforming chemical energy into mechanical energy. An engine is a complete power output system, including components such as transmission gears, the engine core, and drive shafts. The engine core is just one part of the entire engine system but is the most critical component.
2
5
Share

How to Switch Back from Volkswagen S Mode to D Mode?

Volkswagen D mode and S mode can be switched at any time without being affected by vehicle speed or road conditions, and there is no need to press the brake pedal. Below is more information about Volkswagen S mode and D mode: 1. D mode, also known as Drive mode, is the forward driving gear, while S stands for Sport mode. When the gear lever is shifted into S mode, the engine speed will be maintained in a higher range. S mode provides the car with more powerful performance for certain maneuvers. 2. S mode functions by downshifting the automatic transmission by one gear from the current position, enhancing climbing power and overtaking power. D mode is the most frequently used gear in automatic transmission vehicles, suitable for general road conditions.
13
5
Share

What is the emission standard for cars purchased in 2006?

Cars purchased in 2006 comply with the China II emission standard. Here are the relevant details: 1. China's Phase II vehicle emission standard is equivalent to the Euro II emission standard, meaning the pollutant content in exhaust gases matches Euro II levels. According to the 'Announcement on Implementing the National Phase II Motor Vehicle Emission Standards' issued by the State Environmental Protection Administration, starting from September 1, 2003, all newly designed heavy-duty vehicles must meet the National Phase II type approval emission limits equivalent to Euro II standards. This marked a new stage in China's motor vehicle emission pollution control. From July 1, 2004, all newly designed light-duty vehicles had to comply with the China II standard, and the application and approval for light-duty vehicle models meeting the China I standard (equivalent to Euro I) were discontinued. 2. According to Announcement No. 5 of 2006 by the State Environmental Protection Administration, 'Announcement on Publishing New Motor Vehicle Models and Engine Types Meeting National Phase II and Phase III Motor Vehicle Emission Limits', the China III standard mainly applies to light-duty gasoline and diesel vehicles under 3.5 tons, equivalent to the Euro III standard, with a nationwide implementation date of July 1, 2007. The China III standard represents a significant improvement, particularly emphasizing the -7°C emission standard for motor vehicles, which is unique internationally. Another key feature is the zero-start standard for motor vehicles, incorporating OBD (On-Board Diagnostics). Throughout the vehicle's usage, if emission-related issues arise, the vehicle will automatically alert the owner, who should then visit a service station for repairs to resolve the issue.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.