Is Dongfeng Peugeot a Joint Venture Car?

What is the reason for the vehicle displaying a brake failure warning and failing to start?

It may be due to lack of fuel or a dead battery. If the shape of this warning light is the same as or similar to the handbrake light, and it remains on after releasing the handbrake, it indicates that the vehicle's brake pads have worn to the point of needing replacement. It is recommended to replace the brake pads at a 4S shop as soon as possible. If the warning light is shaped like a circle with a foot stepping on the brake, it means the vehicle is reminding you to press the brake before shifting from P to D gear. Below is additional information: Precautions: Check if the battery is dead. Prolonged use of electrical devices can drain the battery, leading to a failure to start. This situation often occurs in older cars that have been idle for a long time. Also, check if the gear is not properly set. Unlike manual transmission vehicles, automatic transmission vehicles cannot start if the gear is not in P or N but in R or D. Additionally, automatic transmissions cannot start if the steering wheel is locked.

9

4

Share

Are Car Solid Air Fresheners Harmful?

Good quality car air fresheners are harmless and have no significant impact on the human body. The main components of car air fresheners are various fragrances and beeswax. Due to the beeswax content, car air fresheners remain solid at room temperature. High-quality air fresheners use purely natural plant-extracted fragrance sources instead of synthetic fragrances, providing a relaxing and pleasant scent. Here are some additional tips: Precautions: To improve the air quality inside the car, the first step is to eliminate the source of odors, frequently open windows for ventilation, regularly clean the air conditioning system, and maintain a clean and tidy interior. If you want to add fragrance to your car, purchase natural air fresheners produced by reputable manufacturers. In summer, opt for neutral, lightly scented air fresheners. For long drives, consider choosing refreshing and invigorating scents.

18

5

Share

What is the standard for gear backlash?

3ml~4ml. The existence of gear backlash will cause impact between teeth, affecting the smoothness of gear transmission. Therefore, this gap can only be very small, usually ensured by tooth difference. For gear motion design, it is still designed without gear backlash (zero backlash). Here is some extended information: Design standard: The design criterion for minimum tooth backlash: To ensure the formation of a normal lubricating oil film between tooth surfaces and prevent the teeth from jamming due to thermal expansion deformation caused by the increase in gear working temperature, there must be appropriate tooth backlash when the gears are meshing. The gear backlash is measured using the base tangent length value (there are two values, upper and lower deviations), and the actual tooth thickness value (with corresponding two values) is calculated. Then, the nominal tooth thickness minus the actual tooth thickness gives the difference. Both meshing gears need to be calculated, and the two differences are added together to obtain the gear backlash (two values, minimum backlash and maximum backlash).

14

1

Share

What are the precautions for manual transmission driving test (Subject 3)?

Subject 3 driving test precautions are mainly divided into vehicle inspection, turn signals and starting, vehicle acceleration, special zones, etc. The details are as follows. Vehicle Inspection: After getting out of the driver's seat, be sure to close the car door. For the buttons that need to be pressed at the rear and front of the vehicle, you must wait until the broadcast inside the car sounds before continuing. Turn Signals and Starting: During the Subject 3 test, turn signals must be used when starting, changing lanes, and overtaking. The test regulations require that the turn signal must be on for three seconds before performing the corresponding operation. When starting the vehicle, you must use 1st gear, but during the test, you cannot drive in 1st gear all the time. You need to shift gears in time to adjust the speed. Vehicle Acceleration: During the test, the examiner may ask you to accelerate, but the driver should not accelerate suddenly, as a sudden upshift may cause the vehicle to stall. Wait until the engine speed reaches about 2000 rpm, press the clutch, shift to 2nd gear, then press the accelerator to upshift. Continue upshifting according to this principle. Special Zones: In special zones, note that many areas no longer have voice prompts, such as school zones, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding operations based on the project signs and road markings. In school zones, apply the brakes 10 meters before the sign, and keep the speed below 30 km/h. At bus stops, apply the brakes 10 meters before the sign, and keep the speed below 30 km/h. At crosswalks, apply the brakes to decelerate within 30 meters before the crosswalk.

14

2

Share

What engine is used in the Toyota E'Z?

Toyota E'Z's engine is produced by Tianjin FAW Toyota Company and is a domestically manufactured engine. The 1.6L version of the Toyota E'Z uses the 1ZR-FE engine model, with a maximum power of 90kW and a maximum horsepower of 122. The 1.8L version uses the 2ZR-FE engine model, with a maximum power of 103kW and a maximum horsepower of 140. The 2.0L version uses the 3ZR-FE engine model, with a maximum power of 107kW and a maximum horsepower of 146. For daily maintenance of the Toyota E'Z engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

12

3

Share

Car Air Conditioning Compressor Damaged: Repair or Replace with a New One?

If the car's air conditioning compressor is broken, it can be repaired. If the issue lies with the electromagnetic valve clutch coil of the compressor, it can be replaced separately. However, if the internal components of the compressor are damaged, a complete replacement is necessary. It is advisable to have a professional technician inspect and perform repairs based on the actual condition. Below is additional information: How Car Air Conditioning Works: The car air conditioning refrigeration system consists of a compressor, condenser, receiver-drier, expansion valve, evaporator, and blower, among other components. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system operates, the refrigerant circulates through the sealed system in different states.

16

4

Share

Is Dongfeng Peugeot a Joint Venture Car?

What is the reason for the vehicle displaying a brake failure warning and failing to start?

Are Car Solid Air Fresheners Harmful?

What is the standard for gear backlash?

What are the precautions for manual transmission driving test (Subject 3)?

What engine is used in the Toyota E'Z?

Car Air Conditioning Compressor Damaged: Repair or Replace with a New One?

What to Do If the Front Bumper Is Cracked?

What happens on the dashboard when a car won't start?

Can I Take the Subject Three Test Immediately After Passing Subject Two?

What Causes Water Leakage in the Car's Passenger Side Vanity Mirror?