Is Dongfeng Nissan Venucia a Domestic Car?

1 Answers
LeNaomi
07/30/25 6:04am
Dongfeng Nissan Venucia is a domestic car, and its car brands include: Venucia D50, Venucia T70, Venucia D60, Venucia R50, and Venucia R50X. The Venucia D50 is the first sedan under Dongfeng Nissan's independent brand. In terms of power, the Venucia D50 is equipped with Nissan's HR16DE engine, which features CVTC (Continuous Variable Valve Timing Control) intelligent control technology and multiple efficiency optimization technologies, paired with either MT or AT transmissions. Taking the 2016 Venucia as an example, its body dimensions are 4480mm in length, 1695mm in width, and 1535mm in height, with a wheelbase of 2600mm. In terms of power, the 2016 Venucia is equipped with a 1.6L inline four-cylinder naturally aspirated engine, delivering a maximum power of 86kW and a maximum torque of 153Nm, matched with a 4-speed automatic transmission.
Was this review help?
7
3
Share
More Forum Discussions

Can a 30-Year-Old Vehicle Still Be Driven on the Road?

It can be driven on the road, but there are two prerequisites. One is the issue of vehicle annual inspection, and the other is the reliability of the old car. According to regulations, vehicles that are 15 years old require two annual inspections per year. Moreover, older vehicles generally exceed emission standards and are usually guided toward scrapping. Below is an introduction to vehicle scrapping regulations: Latest regulations: According to the 2020 vehicle scrapping regulations, non-operational small and micro vehicles have no usage lifespan, but when the mileage reaches 600,000 kilometers, the state will guide them toward scrapping. Usage lifespan regulations: In 2020, the usage lifespan restrictions for non-operational passenger cars were abolished, while the scrapping mileage limit for private cars was set at 600,000 kilometers. Vehicles are exempt from inspection for the first 6 years, require annual inspections from 6 to 15 years, and require two inspections per year after 15 years. As long as the vehicle passes the annual inspection, it can continue to be driven on the road. Taxis and ride-hailing vehicles are subject to mandatory scrapping after 8 years.
5
2
Share

Can Driving Test Subjects 2 and 3 Be Taken Consecutively?

Driving test subjects 2 and 3 can be taken consecutively. Article 36 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": The vehicle management office shall arrange the test according to the scheduled test site and time. After the applicant passes Subject 1, they can schedule Subject 2 or Subject 3 road driving skill test. In areas where conditions permit, applicants can schedule both Subject 2 and Subject 3 road driving skill tests simultaneously. Once the scheduling is successful, the tests can be taken consecutively. Pros and cons of taking Subjects 2 and 3 together: The "pro" of taking Subjects 2 and 3 together is the saving of time cost. After passing Subjects 2 and 3 consecutively, some regions allow taking Subject 4 immediately and obtaining the license on the same day, which greatly reduces the time cost of learning to drive. The "con" is the tight schedule, the psychological pressure of rushing between tests, and the different rhythms of Subjects 2 and 3, which may affect test performance.
1
2
Share

Is the Chevrolet Orlando equipped with a three-cylinder engine?

The Orlando is powered by a 1.3T three-cylinder turbocharged engine. Here are the relevant details: 1. Model: The Orlando is the first Chevrolet model in China to feature a three-cylinder engine, and it is a seven-seater vehicle. 2. Exterior: The car adopts Chevrolet's family-style design, with an overall very fashionable appearance. The car's line design embodies the inherent muscular feel of American vehicles. 3. Interior: The interior design of this car is relatively simple, appearing much plainer compared to the exterior. The materials used in the interior can be described as standard. 4. Dimensions: The car measures 4684*1807*1627mm in length, width, and height, with a wheelbase of 2796mm. Compared to other models in its class, the Orlando's space performance is very advantageous, making the seven-seater model ideal for family use. 5. Power: The car is equipped with a 1.3T turbocharged engine, delivering a maximum power of 120kw and a maximum torque of 230 Nm. The engine is paired with a 6-speed automatic transmission.
12
0
Share

What is the qualified standard for fastener torque inspection?

Generally, the inspection indicators for fasteners include anti-slip performance and anti-damage performance. Different fasteners have different indicators. According to national regulations, fasteners are considered qualified when they do not fail under a load of P=25KN. However, this standard is far from sufficient for fasteners intended for export. The vehicle inspection process is as follows: 1. Prepare the required materials for vehicle inspection, such as the vehicle license, ID cards of the owner and the agent, and copies of the ID cards. 2. Conduct an exterior inspection of the vehicle upon arrival at the inspection site. 3. Pay the inspection fee and enter the information. 4. Proceed with the online inspection. 5. Undergo a final review by the inspector. 6. Once approved, the relevant personnel will issue the annual inspection sticker to the owner. The inspection cycle varies depending on the vehicle type: 1. For small and micro non-commercial passenger vehicles, inspections are required every 2 years within the first 6 years, annually after 6 years, and every 6 months for vehicles over 15 years old. 2. For commercial passenger vehicles, inspections are required annually within the first 5 years and every 6 months for vehicles over 5 years old. 3. For trucks and large or medium non-commercial passenger vehicles, inspections are required annually within the first 10 years.
9
2
Share

What issues should be paid attention to when registering for a driver's license test?

When applying for a driver's license, it is necessary to clarify the price or fee structure, learning process, and training site of the driving school. Price or fee structure of the driving school: It is important to understand whether the driving school requires a one-time payment or if additional payments will be required during the process. Learning process: For example, whether there is a mock test before learning Subject 2; how to book a coach—whether it is done online or assigned by the driving school; whether the same coach is assigned for Subject 2 throughout or if it is random each time, and whether you can choose your coach; the details of the class you plan to enroll in, such as how often you can expect to have a training session on average, and how long the entire process will take to complete. Training site: The registration point, the headquarters of the driving school, and the training site have different functions and responsibilities, and they are generally not located together. The training site is the most frequently visited place during the learning process, so it is crucial to verify whether it meets your requirements. Additionally, consider whether the distance is convenient. Understanding the training site issue can effectively prevent the driving school from changing the training site midway.
6
2
Share

What is the actual fuel consumption of the Hongqi HS7?

According to actual measurements, the average fuel consumption of the Hongqi HS7 3.0T model is 13.92L/100KM, with a range of 11.8L-16L. Test data shows that the Hongqi HS7 has relatively poor fuel economy, with urban fuel consumption of 16 liters, comparable to a 4.0T engine. Even when driven gently, the Hongqi HS7's fuel consumption remains around 12 liters. Below are the relevant details: 1. Official fuel consumption: The official combined fuel consumption of the Hongqi HS7 3.0T is 10.9L/100km. Among vehicles in the same class, even with a 3.0T engine, fuel consumption is typically around 9 liters (official data). However, from a mechanical perspective, this fuel consumption is understandable because the Hongqi HS7's engine uses a supercharger instead of a turbocharger. The supercharger consumes some of the crankshaft's power, which explains why the Hongqi HS7 is slightly more fuel-consuming. 2. Fuel-saving methods: Switching to low rolling resistance tires can help improve fuel efficiency to some extent. Additionally, factors such as vehicle weight, tires, aerodynamic drag, and load can also affect fuel consumption. Therefore, to achieve better fuel economy, it is advisable to avoid high engine RPMs and to coast downhill by releasing the accelerator pedal.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.