Is CYS Color Change Film Domestic or Imported?

1 Answers
OAdaline
07/30/25 6:47am
CYS color change film is domestic. Introduction to CYS color change film: CYS is a domestic brand of color change film, similar to ManCai color change film, both positioned as high-end and are among the top ten brands. Functions of color change film: It adds a protective layer to the car body, safeguarding the paint from sun, rain, and scratches from sand and stones. The color change film is applied to the car's paint surface, completely covering and isolating it from the external environment, protecting the paint from corrosion by acid rain, UV rays, bird droppings, and tree resin, as well as preventing scratches and wear from pebbles and dust. It preserves the original paint color and gloss, slows down aging, keeps the car looking new for longer, and maintains its value. Under the cover of the color change film, the car body is fully protected from external damage. After several years, when the film is removed, the original paint remains as bright and new as ever, making it an excellent choice for maintaining car value. It eliminates the need for waxing, sealing, or coating; simple cleaning is sufficient for long-term maintenance. After applying the color change film, frequent expenses on waxing and sealing are no longer necessary. If the original paint is already damaged, the color change film can cover it up. For accidental damage to the original factory paint, there's no need for polishing or repainting; simply cover it with the color change film to perfectly conceal the flaw, giving the damaged car a fresh new look.
Was this review help?
17
0
Share
More Forum Discussions

What to Do If It Rains During the Subject 2 Driving Test?

If it rains during the Subject 2 test, calmly adjust your mindset and respond appropriately. Below are some tips for the Subject 2 test: 1. Clutch Control: Mastering clutch control is essential in the Subject 2 test. During the test, maintain a slow and steady speed by flexibly adjusting the clutch. When turning the steering wheel one and a half turns, slightly release the clutch to avoid stalling. When straightening the steering wheel, press the clutch slightly to prevent sudden acceleration, which could disrupt normal driving. Always operate the clutch gently, lifting and pressing it slowly. 2. Avoid Stopping Midway: It's best to maintain a steady speed during the Subject 2 test. The clutch is equipped with sensors, so avoid releasing it too quickly during startup, as this might be mistaken for stopping midway. After starting, control the speed carefully to avoid stopping. If the vehicle stops without fully pressing the brake, it may affect your test score. 3. Start with Brake to Prevent Rolling Back: During the Subject 2 test, rolling back may occur when starting on a slope. To prevent this, start with the brake engaged. Release the clutch to the critical point before releasing the brake. Slowly lift the clutch until the car body slightly vibrates, then release the brake. 4. Don’t Panic If the Engine Stalls: If the engine stalls during the test, stay calm. Shift to neutral and restart the engine. When on a slope, remember to press the brake. Stalling deducts 10 points, and repeated stalling during startup may lead to failing the test.
5
3
Share

Where is the fuel tank cap switch located on the 2021 Honda Fit?

The fuel tank cap switch of the 2021 Honda Fit is located next to the engine hood switch. Below is more information about the Honda Fit: 1. Vehicle positioning: The Fit is a compact car under Honda, with dimensions of 4109mm in length, 1694mm in width, and 1537mm in height, and a wheelbase of 2530mm. 2. Powertrain: The Fit is equipped with a 1.5L naturally aspirated engine across all variants. The engine, coded L15BU, delivers a maximum power of 96kW and a maximum torque of 155Nm, with peak power at 6600 rpm and peak torque at 4600 rpm. The engine features i-VTEC technology and direct injection, with an aluminum alloy cylinder head and block, paired with a CVT transmission. 3. Suspension: The front suspension uses a MacPherson strut independent setup, while the rear suspension employs a torsion beam non-independent configuration.
7
4
Share

Why Do the Lights Stay On After Removing the Car Key?

Many car designs have the headlights not controlled by the ignition switch, also known as ACC control. Here is a detailed introduction about car headlights: 1. Car Headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the 'eyes' of the car. They not only affect the external image of the car owner but are also closely related to safe driving at night or in bad weather conditions. The use and maintenance of car lights should not be overlooked. 2. Car Headlight Enhancer: The car headlight enhancer uses a scientific voltage-boosting method to provide a constant optimal working voltage for the car headlights. It preheats and protects the bulb filament during startup (3~6 seconds), and after startup, the headlights emit a constant, bright white light that does not vary with engine speed. It does not alter the original headlight's light distribution, nor does it increase the load on the original car circuit. It is safe and practical, with an extremely simple installation method.
20
0
Share

Can I find a job with a newly obtained B2 driver's license?

It is relatively easy to find a job with a newly obtained B2 driver's license. The following are the requirements for obtaining a driver's license: 1. Height: Must meet the requirements for the vehicle type. 2. Vision: Must not be colorblind. 3. Hearing: Must have normal hearing. 4. Limbs: Must have healthy limbs, torso, upper limbs, and both thumbs, with at least three fingers intact on each hand. 5. Motor function: Must have normal motor function in upper and lower limbs. Below is additional information for registering for a driver's license: 1. Photos: Seven 1-inch color photos with a white background. 2. Registration fee: Payment can be made in cash, by card, or via transfer. 3. ID copy: A copy of the ID card is required, with both sides copied onto a single sheet of paper. 4. Household registration copy: For non-local residents, a residence permit is also required.
12
3
Share

Why is there no sound when playing music via Bluetooth in BYD cars?

Generally, this occurs because the volume is not turned on either in the car's navigation system or on the phone. Additionally, some phones have different playback compatibility codes with certain car models, allowing only phone calls but not music playback. The specific reasons are as follows: 1. The volume is not turned on in the car's navigation system or on the phone: Solution: Go to the phone's "Settings" — "Sound," find the "Media" option, and increase the "Media" volume. The same applies to the car's navigation system. 2. Multimedia music is not enabled in the car's Bluetooth settings: Solution: Locate the multimedia option on the screen, enter it, and select Bluetooth for music playback. 3. The media audio on the phone is not turned off, causing signal interference with the Bluetooth function: Solution: Go to the phone's Bluetooth settings, turn off the media audio while keeping the phone audio enabled.
8
2
Share

What to Do When the Car Windows Fog Up While Driving?

Press the defog button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and activate the external circulation to defog. You can use either cold or warm air to remove fog from the car windows, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the surface and achieving defogging. The method for using warm air is the same as cold air, but note that warm air should not be used on rainy days as it may initially worsen the fog. Always use external circulation when defogging car windows. The reason car windows fog up: There is a temperature difference between the inside and outside of the car. If the temperatures differ, the side with the lower temperature will have a lower saturated vapor pressure on its surface compared to the surrounding environment, causing water vapor to accumulate on the glass in the form of tiny droplets, forming fog. Methods to defog car windows: Air Conditioning (Cold Air): Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car, if the air conditioning is not turned on promptly, the exhaled humid air can quickly cause the windshield to fog up. In this case, turn on the air conditioning and blow cold air onto the windshield. The dehumidification function will quickly remove the fog. If the humidity is too high and the air conditioning is ineffective, slightly open the windows to rapidly reduce the humidity inside the cabin. Combining this with the air conditioning can speed up the process. Air Conditioning (Warm Air): Use warm air to reduce the temperature difference and remove fog. In winter, blowing warm air onto the glass quickly raises the windshield's temperature, reducing the temperature difference between the inner and outer surfaces and preventing heavy fogging. However, note that the rear and side windows heat up more slowly, so it takes longer to fully remove the fog. Whether using automatic or manual air conditioning, turning it on helps with dehumidification. Avoid setting the temperature to the coldest level, as prolonged use may cause frost to form on the outer surface of the windshield. Applying Anti-Fog Spray or Other Preventive Measures: Spray a small amount of defogging agent onto the car windows and wipe it clean to remove dirt and stains. This leaves a thin transparent protective film on the glass, effectively preventing water vapor from condensing and forming fog. This is especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying, let it dry and then wipe off any excess with a chamois or soft dry cloth. This can keep the windows fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, opening the side windows can create airflow between the inside and outside, reducing the temperature difference and gradually eliminating the fog. This method works on the same principle as using cold air from the air conditioning. However, opening windows has obvious drawbacks—it cannot be used during rain, snow, on highways, or when the fog is too heavy. Rear Window Heating: Most cars are equipped with a rear window heating function, though the button location may vary. Turning on the rear defroster will clear the fog from the rear window in about a minute.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.