···
Log in / Register

Is Crystal Coating Harmful to Car Paint?

3 Answers
Madeline
07/23/25 10:24pm
For a new car, crystal coating does not cause damage to the paint surface; however, for a car that has been used for some time, crystal coating can potentially harm the car paint. For a new car, crystal coating only requires deep cleaning of the paint surface, followed by mirror restoration, degreasing treatment, and then applying the crystal coating directly. Since the paint surface of a new car has fewer contaminants and almost no scratches, the process is relatively quick. For a car that has been used for some time, the paint surface must first undergo polishing, followed by mirror restoration, degreasing, and finally, the crystal coating application. Due to various environmental factors causing different degrees of damage to the vehicle, it is essential to remove any contaminants or scratches from the paint surface beforehand to ensure it is smooth, allowing the crystal coating to achieve the best results. Benefits of Crystal Coating: Scratch Resistance: The high hardness of diamond crystals prevents most minor scratches and possesses elastic recovery capabilities. Corrosion Resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint surface from the external environment, effectively preventing oxidation and acid rain corrosion. No Cracking: Diamond crystals are resistant to UV rays, extreme temperatures, and strong temperature variations, preventing cracking or peeling. Easy Cleaning: The robust fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect, making it easier to clean and maintain. Anti-Static: Diamond crystals contain anti-static agents, reducing dust adhesion to the paint surface. Enhanced Shine: The crystal structure of diamond crystals, similar to that of diamonds, increases light refraction, resulting in a brighter and more translucent paint surface.
Was this review help?
9
4
Share
PaigeAnn
08/10/25 6:09pm
I've always felt a bit apprehensive about car care, especially when it comes to ceramic coating. A few months ago, I got my beloved car coated, and I was quite nervous about it. Turns out, there's absolutely no harm done. The key is choosing the right product – there are cheap ceramic coating liquids on the market that contain acidic components, which could cause corrosion or peeling if sprayed onto aging paint. That's why I specifically went to a professional shop. The technician explained that good ceramic coatings are nano-level, forming a pure transparent layer that's both scratch-resistant and UV-protective, offering excellent long-term protection for the paint. Just make sure not to apply it when the car surface is wet or dusty, as impurities mixed in could cause tiny scratches. Overall, maintenance is simple – just regular waxing is enough, and it actually extends the paint's lifespan. I'd recommend it to other new car owners – it's worry-free and protective.
Was this review help?
5
3
Share
Expand All
XavierLee
09/23/25 6:22am
As a technician who has handled paint jobs for hundreds of cars, ceramic coating is actually not very harmful. It's essentially a protective film, but choosing the wrong product or improper application can cause issues. For example, using inferior products containing corrosive agents may erode the clear coat over time, leading to fading or bubbling. The correct approach is to thoroughly clean the surface before applying the coating, allowing the paint to breathe; high-quality products can enhance gloss and prevent aging. I advise car owners not to opt for cheap DIY kits online, as they can easily lead to mistakes like orange peel or dust contamination. In terms of maintenance, it's convenient, reducing rain erosion and bug marks, making it a safe and efficient investment—provided it's applied professionally.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Where is the fuse for the Buick Excelle cigarette lighter located?

Buick Excelle cigarette lighter fuse is located in the fuse box under the dashboard cover. Instructions for using the cigarette lighter: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter begins heating. When the heating wire reaches the required temperature, it will automatically pop out or wait 5-8 seconds until the heating wire turns red, then manually remove it. Precautions for using the cigarette lighter: 1. Frequent plugging/unplugging may cause the lighter to get stuck in the socket and fail to heat; 2. When the heating wire reaches temperature and glows red, the retaining spring may deform due to high temperature; 3. Regularly check if the socket retaining spring has become loose.
14
5
Share

How to steer when the car is leaning to the left?

When reversing to the left, turn the steering wheel to the left. Just remember one thing when reversing: to move the rear of the car in a certain direction, turn the steering wheel in that direction. Because car brands are different, models are different, reference points are different, the timing of steering when reversing is basically different for each car, and it cannot be generalized. Because the light may be too dark to see clearly, it is recommended to get out of the car and observe the exact position before reversing. This is for safety considerations and also makes it easy to correct the body position immediately.
16
5
Share

What is the reason for white smoke coming from the exhaust pipe after carbon cleaning?

The reasons for white smoke coming from the exhaust pipe after carbon cleaning are: 1. Residual cleaning agent sprayed inside during cleaning; 2. When the vehicle is started, the residual cleaning agent will burn along with the fuel, and if the air-fuel mixture is too rich, it will produce white smoke. The exhaust pipe is installed between the engine exhaust manifold and the muffler, allowing the entire exhaust system to have flexible connections, thereby reducing vibration and noise, facilitating installation, and extending the life of the exhaust muffler system. The maintenance methods for the exhaust pipe are: 1. Regularly check if the exhaust pipe is cracked; 2. Regularly inspect the exhaust pipe for abnormal noises; 3. Regularly check for any foreign objects inside the exhaust pipe; 4. Let the engine idle for 10 minutes before starting to expel accumulated water inside.
6
0
Share

What is the method for adding windshield washer fluid?

The method for adding windshield washer fluid is: 1. Use the wiper control knob to first spray out the old washer fluid; 2. After completely spraying out the existing fluid, open the washer fluid reservoir and add a small amount of new washer fluid solution; 3. Activate the washer spray function again to flush out any remaining old fluid; 4. When no more fluid sprays from the nozzles during the second activation, refill with new washer fluid and securely close the cap. Windshield washer fluid consists of water, alcohol, and ethylene glycol, serving as a cleaning liquid for vehicle windshields. Its functions include: 1. Windshield cleaning via wipers; 2. Anti-freeze and anti-fog properties.
12
2
Share

How are license plates ending with letters restricted?

Vehicles with license plates ending in English letters are managed as even-numbered plates. Within urban areas, odd-even license plate restrictions are implemented, with odd-numbered plates allowed on odd days and even-numbered plates on even days. Based on the last Arabic digit of the vehicle license plate (including temporary plates), they are divided into five groups. On Mondays, plates ending with "1" and "6" are restricted. The odd-even driving restriction is implemented 24 hours a day, with plates ending in letters or Chinese characters managed as even-numbered plates. Vehicle license plates ending with English letters are managed as number "0".
16
0
Share

How to Perform Front-First Parallel Parking?

First, drive past the parking space to assess whether it can accommodate your vehicle. Quickly shift your gaze from the right rearview mirror to the left rearview mirror, paying attention to oncoming traffic and obstacles on the left side. While turning the steering wheel fully, slowly reverse until the left rearview mirror can completely see the front of the car behind you, then straighten the wheels and continue reversing. Observe the distance between the right rear wheel and the curb. When it seems appropriate, turn the steering wheel fully to the left and try to get the car as close to the curb as possible. Once most of the car is in the parking space, the driver should determine the distance from the car behind by turning their head or using the parking assist system.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.