Is Cruise Control Practical?

1 Answers
DiSilas
07/29/25 7:39pm
Cruise control is quite practical on roads with less traffic or on highways, as it can reduce the driver's workload and enhance driving comfort. The cruise control system, also known as CCS, allows the car to maintain a speed set by the driver without the need to press the accelerator. Cruise control is also referred to as speed control system or autonomous driving system. Its function is to automatically maintain the vehicle's speed as set by the driver, eliminating the need to press the accelerator pedal, thus keeping the car moving at a constant speed. With this system, drivers no longer need to manually control the speed during long highway drives, reducing fatigue and unnecessary speed changes, which can also save fuel.
Was this review help?
18
1
Share
More Forum Discussions

What does vehicle understeer mean?

"Understeer" describes a loss of control during vehicle steering, with its technical term being "insufficient steering." Front-wheel-drive cars often exhibit this phenomenon when pushed to their cornering limits. More details are as follows: 1. From the perspective of vehicle handling and safety, front-wheel-drive cars have their engine and drive shaft center located at the front, with the driving wheels being the two front wheels. 2. Therefore, during cornering, the front weight shifts forward due to inertia, making it easier to exceed the front tires' grip and causing insufficient steering, which is the root cause of "understeer." 3. When slight understeer occurs, there's no need to panic; simply easing off the throttle can quickly regain control of the vehicle.
5
3
Share

How to Deal with Slightly Deformed Wheel Hubs?

Methods for handling slightly deformed wheel hubs are as follows: 1. Locate the deformation: For slight deformations, use specialized detection equipment to identify the exact position of the hub deformation; 2. Local heating: Apply heat to the deformed area of the wheel hub using a heating tool; 3. Correction: Once the deformed area reaches a certain temperature, use wheel hub repair equipment to fix the deformation; 4. Re-inspection: After the repair is completed, inspect the wheel hub again to check for any remaining deformation. If none is found, the repair of the slightly deformed wheel hub is complete.
20
4
Share

How to Check Vehicle Information Using the VIN?

The Vehicle Identification Number (VIN) contains information about the vehicle's manufacturer, production year, model, body type, engine, and other equipment. Here are the specific methods to check vehicle information using the VIN: 1. After entering the VIN, click 'Search' to view vehicle details, including the brand, model, year, displacement, transmission, drivetrain, body structure, engine information, and commonly used auto parts. 2. Click the 'More' button to access additional parts information. 3. Vehicle information can only be checked on professional auto parts platforms, which require registration and login. Some platforms may charge a fee for queries.
19
5
Share

Where Can I Buy Car Windshield Washer Fluid?

Car windshield washer fluid is available at supermarkets, gas stations, 4S stores, car beauty shops, or auto parts markets. Below is a detailed introduction to car windshield washer fluid: 1. Cleaning performance. Windshield washer fluid is formulated with a variety of surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Antifreeze performance. It can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance. A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static performance. After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate surface charges, providing anti-static properties. 5. Lubrication performance. With higher viscosity, it can act as a lubricant, reducing friction between the wiper and the glass to prevent scratches.
14
2
Share

Why does the engine idle normally but misfire at high speed?

The reasons for normal engine idle but misfire at high speed are as follows: 1. Excessive spark plug electrode gap; 2. Improper adjustment of distributor contact gap; 3. Weak contact arm spring; 4. Faulty ignition coil or capacitor. The solutions for engine misfire at high speed are as follows: 1. Open the distributor cover and check the distributor gap, which should be 0.35-0.45 mm. Otherwise, adjust the contact gap. 2. Check the spring tension of the contacts. Use a spring scale to lift the contacts to the normal gap, and the reading on the spring scale indicates the spring tension. The normal value should be 500-700 grams. If a spring scale is not available, replace a set of contacts. 3. Remove the spark plug and observe the spark plug gap. The normal value should be 0.6-0.8 mm. If a specialized measuring feeler gauge is not available, a hacksaw blade with a thickness of 0.7 mm can be used for testing. This type of fault can be easily detected using an oscilloscope in a professional repair shop.
20
1
Share

Where should the temporary license plate be affixed on the car?

Temporary license plates should be affixed as follows: 1. One should be placed on the lower left or right corner of the front windshield inside the car; 2. The other should be placed on the lower left corner of the rear windshield inside the car. Below is relevant information about affixing items on motor vehicles: 1. Motor vehicle license plates should be hung at designated positions on the front and rear of the vehicle, maintaining clarity and completeness. Heavy-duty and medium-duty trucks and their trailers, as well as tractors and their trailers, should have enlarged license plate numbers painted on the rear of the body or cargo compartment, with the characters upright and clearly visible. 2. The motor vehicle inspection compliance mark and insurance mark should be affixed to the upper right corner of the front windshield. 3. Any painting, affixing of marks, or body advertisements on motor vehicles must not affect safe driving.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.