Is Crossing the Stop Line and Parking Subject to Fines?

1 Answers
PhoebeMarie
07/30/25 10:24am
If the vehicle has just crossed the stop line but stops immediately, traffic authorities generally will not impose a penalty. Below are the relevant details: Regulations: To capture red-light running violations, traffic cameras require three photos as evidence. If the vehicle shows significant movement after crossing the stop line during a red light, it will be penalized. Photo Evidence: The three photos captured by traffic cameras for red-light running violations are: the first showing the vehicle crossing the stop line, followed by two more showing the vehicle moving to the middle of the intersection and reaching the opposite side. These three photos clearly document the vehicle's movement during the red light, with the key point being the recording of significant positional changes. Therefore, if the vehicle has only just crossed the stop line during a red light but stops immediately, traffic authorities typically will not issue a penalty. If a penalty has been imposed, the vehicle owner can file an appeal.
Was this review help?
4
2
Share
More Forum Discussions

Is It Normal for the Land Rover Evoque Tire Pressure Monitoring System to Malfunction?

Land Rover Evoque tire pressure monitoring system malfunction is not a normal phenomenon. This issue indicates that the tire pressure is too low and requires immediate inflation to resolve. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to become heavy and prone to deviation, among other factors detrimental to driving safety; Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heating of the tire; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire side prone to cracking, while generating flexing movements, leading to excessive heat, accelerating rubber aging, fatigue of the cord fabric layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
17
3
Share

What is the wheelbase of the Accord?

The wheelbase of the Accord is 2830mm. The exterior dimensions of the Accord are 4906mm in length, 1862mm in width, and 1449mm in height. The vehicle is a sedan with four doors and five seats, featuring a fuel tank capacity of 56 liters. It is positioned as a mid-size car. The vehicle adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a multi-link independent rear suspension. It utilizes electric power steering and a unibody construction. The Accord is equipped with a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated hybrid engine. The Accord is manufactured by GAC Honda. GAC Honda Automobile Co., Ltd. is a joint venture established by China's Guangzhou Automobile Group Co., Ltd. and Japan's Honda Motor Co., Ltd. on July 1, 1998. It is a Sino-Japanese joint venture headquartered in Guangzhou, China.
20
1
Share

Is the Lavida Fashion Edition a standard or low configuration?

Fashion is the low configuration. Comfort is the mid configuration. Luxury is the high configuration. Below is a detailed introduction about the Lavida car: Overview: The Lavida is a sedan produced by Shanghai Volkswagen and was launched in June 2008. While continuing the design language of "dynamic and fashionable" in the A-segment car market, the LAVIDA Lavida embodies a new design DNA: "fusion." The vehicle dimensions are 4605/1765/1460mm. Features: As a new car tailor-made for Chinese consumers, the LAVIDA Lavida not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements of the era.
7
5
Share

What are the claim conditions for the Golf 6 transmission?

Golf 6 transmission claim conditions are that the transmission failure meets the claim standards. The following is a detailed introduction about car transmissions: Overview: The transmission is a device that changes the speed ratio and direction of motion, usually located between the clutch and the central drive. It can change the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft according to different working conditions. Gear-driven transmissions generally consist of a housing and several gears. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. The early transmission system of AT transmissions was mainly 4AT. AT achieves automatic shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission, with fewer parts and a smaller size. DCT has two clutches.
11
4
Share

Is it necessary to install wider tires on the Leapmotor T03?

It is necessary to install wider tires on the Leapmotor T03 as it can enhance the overall performance of the vehicle. Below is a detailed introduction about the Leapmotor T03: Overview: The Leapmotor T03 is positioned as a long-range intelligent pure electric car, featuring a curved technology aesthetic design language. It offers a comprehensive range of 400KM under standard driving conditions and is equipped with an L2-level intelligent assistance system, setting new benchmarks in all aspects for intelligent pure electric compact cars. Other details: The Leapmotor T03 measures 3620/1652/1577mm in length, width, and height respectively, with a wheelbase of 2400mm, and is classified as a 5-door, 4-seater micro pure electric vehicle. In terms of appearance, the new car adopts a curved technology aesthetic design language, presenting a compact and cute shape. It offers options such as a smile curve/3D honeycomb front face, functional cat-eye automatic headlights, quantum fluid LED taillights, and optional 15-inch agile aluminum alloy wheels.
2
2
Share

How often should the timing belt of the 2013 Lavida be replaced?

The timing belt of the 2013 Lavida should be replaced every 4 years or 60,000 to 80,000 kilometers. The timing belt is a crucial component of the engine's valve system, made of rubber. It connects the upper part (the timing pulley on the engine cylinder head) to the lower part (the crankshaft timing pulley). The camshaft connected to the timing pulley has cams that interact with small rocker arms, which generate pressure through the power transmitted by the timing belt, enabling the lifting action. Here are some precautions for replacing the timing belt: Loosen the bolts of the crankshaft pulley, but first ensure the flywheel is locked using a specialized tool. When installing a new timing belt, make sure that when cylinder No. 1 is at ignition, the mark on the camshaft timing gear aligns with the indicator on the edge of the oil pump housing. Also, the mark on the crankshaft timing belt tooth must align with the mark on the timing belt rear cover. If the belt starts showing cracks, becomes stiff due to aging, or loses teeth due to lack of maintenance, the engine may experience skipped teeth or, in severe cases, the belt may break completely.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.