Is crossing the solid line captured or always photographed?

1 Answers
MacAmir
07/30/25 3:19am
Crossing a solid line will always be photographed by electronic surveillance. Here is more information about crossing the line: 1. Relevant regulations: The illegal act of a vehicle crossing a white solid line or straddling the line is considered a violation of prohibited markings, generally resulting in a fine of around 200 and 3 demerit points. 2. Notes: The purpose of white solid lines is to separate lanes in the same direction, usually marked before traffic lights at intersections. Driving a motor vehicle in violation of prohibitory signs or markings results in 3 demerit points and a fine. Crossing solid lines is one of the most common violations committed by novice drivers, often due to carelessness.
Was this review help?
9
4
Share
More Forum Discussions

Does the Haval H9 need to be registered after being raised by 2 inches?

Haval H9 needs to be registered after being raised by 2 inches. Impact of not registering the vehicle after raising: Raising by 2 inches involves modifying the vehicle's suspension, which generally cannot pass the annual inspection. Before raising, it is necessary to register with the traffic management department, otherwise it will not pass. Any modifications that affect driving safety are prohibited and will not pass the annual inspection. Modifications that cannot pass the annual inspection: After modifying the engine power by adding a turbocharger, although the power is improved, it creates significant hidden dangers for driving. While the power is enhanced, other aspects such as braking, transmission matching, and even the engine lifespan are greatly compromised, raising safety concerns.
1
5
Share

Which country does the George Patton belong to?

The George Patton is produced in the United States and is a super off-road vehicle. Below are the specific details about the George Patton: 1. The new George Patton off-road vehicle is modified based on the Ford F350. While retaining its off-road performance, the vehicle's exterior has been further transformed with a revolutionary design of the body frame, featuring more angular body lines. 2. This vehicle is equipped with an active adaptive suspension system, ensuring stability during driving and the safety of passengers. Despite its exaggerated exterior design, it boasts a refined interior with a very comfortable overall layout. 3. With a body length of nearly 6 meters, paired with a V6 twin-turbocharged engine delivering 375 horsepower, it offers all-weather, all-terrain driving capabilities. Multiple luxurious interior designs allow passengers to enjoy both the thrill of off-roading and a perfect comfort experience during the journey.
6
0
Share

What are the reasons for insufficient tire pressure?

The reasons for insufficient tire pressure are: 1. Air leakage from the tire or valve; 2. Wheel rim deformation leading to reduced tire sealing performance; 3. Long-term overloading of the vehicle causing uneven tire stress; 4. Thermal expansion and contraction, where process differences in tires lead to insufficient tire pressure due to temperature changes. The hazards of insufficient tire pressure are: 1. Excessive wear at the tire shoulder; 2. Increased likelihood of tire impact bulges; 3. Reduced adhesion between tire components leading to delamination; 4. Severe underinflation causing sidewall damage; 5. Excessive tire bouncing causing abnormal wear between the bead and rim, damaging the bead; 6. Increased rolling resistance leading to higher fuel consumption.
8
0
Share

Does a new car need to be registered after adding a rear wing?

Adding a rear wing to a new car is considered a body modification and requires registration. Unauthorized installation of a rear wing without reporting it may result in the vehicle being impounded by the traffic management department, the illegal device being confiscated, and the owner being ordered to restore the vehicle to its original condition and fined according to the law. After the modification is completed, the vehicle license must be re-photographed and replaced to ensure that the photo on the license matches the modified vehicle, enabling the car to pass annual inspections and routine safety checks. Although the new regulations have "loosened" the policy on vehicle modifications, it does not mean that cars can be modified arbitrarily. While the requirements have been relaxed and procedures simplified, there are still strict regulations for modified vehicles. Particularly for modifications involving the engine, body, or frame, a motor vehicle safety technical inspection certificate must be submitted to ensure safety.
7
1
Share

How to reset the tire pressure light on the Roewe RX5?

The method to reset the tire pressure light on the Roewe RX5 is as follows: 1. Open the vehicle control interface. 2. Touch the driving maintenance option. 3. Enter the tire pressure reset interface. 4. After confirming that the tires are in good condition, perform the reset operation. Below is some related information about the Roewe RX5: 1. The Roewe RX5 has a body length, width, and height of 4556mm, 1855mm, and 1719mm respectively, with a wheelbase of 2700mm and a trunk capacity of 639 liters. 2. The Roewe RX5 is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm, paired with a 6-speed manual transmission.
2
4
Share

What antifreeze does the Audi Q3 use?

Audi Q3 uses Elmann antifreeze. Precautions for replacing antifreeze: There is an important note when replacing or adding antifreeze: you must use the same type of antifreeze as the original. Because different types of antifreeze have different chemical compositions, mixing them can easily cause sedimentation and crystallization, and the cooling effect of the antifreeze will also be reduced. Therefore, it is essential to use the same type as the original antifreeze. Functions of automotive antifreeze: Another name for automotive antifreeze is coolant, which helps lower the engine temperature. Since the engine generates a large amount of heat during operation, 60% of the heat is dissipated into the surrounding space through the cooling system. Water and methanol coolants have low boiling points and are prone to boiling. If the vehicle operates under conditions where the coolant is boiling, even for a short period, it can cause engine damage or even failure.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.