Is Continuous Lane Changing Considered a Violation?

3 Answers
SanCarmen
07/25/25 8:40am
Continuous lane changing is not considered a violation. Relevant details are as follows: 1. Regulations: Violating prohibited markings includes crossing solid yellow lines (indicating no crossing of the central divider) and yellow X markings (indicating no parking). Driving over these constitutes a violation of prohibited marking instructions. Solid line lane changes, making U-turns in no-U-turn zones, and left turns where prohibited are punishable by a 200 yuan fine and 3 penalty points. 2. Additional Information: Both single and double solid yellow lines are prohibited markings. Crossing or driving over these lines is illegal. Failing to follow directional markings at intersections, making U-turns in no-U-turn zones, and performing prohibited left turns are punishable by a 200 yuan fine and 3 penalty points.
Was this review help?
5
5
Share
CamillaAnn
08/11/25 1:54pm
Having driven for so many years, I've seen plenty of cases where people got fined for illegal consecutive lane changes. This is really something that shouldn't be done. The traffic safety laws clearly require changing lanes one at a time, not skipping across multiple lanes, especially on highways or during city traffic jams when accidents are more likely to happen. Once, I personally witnessed someone changing two lanes consecutively without signaling, resulting in a sideswipe with the car behind. The traffic police arrived and immediately fined them 200 yuan plus penalty points. Consecutive lane changes catch other drivers off guard, increasing the risk of rear-end collisions and creating major safety hazards. I recommend all drivers develop good habits: signal for at least three seconds before changing lanes, check the rearview mirror carefully before moving, and never take shortcuts by skipping lanes. Be patient while driving—save yourself some fines and stay safe. Isn't that worth it?
Was this review help?
12
1
Share
Expand All
VanMarcus
09/27/25 7:02am
I understand the traffic rules, and changing lanes consecutively is indeed considered a violation, which can result in fines in many regions. Legally, this is classified as dangerous driving behavior, violating safe driving regulations. For example, changing multiple lanes at once may be regarded as not following the proper lane-changing procedures. If caught by traffic police, fines of several hundred yuan are common, and one or two penalty points may also be deducted. In reality, many such violations occur because drivers are in a hurry, but the risks simply aren't worth it. Changing lanes too quickly can lead to skidding or loss of control, especially in slippery conditions like rain. Based on accident data I often review, this is one of the common causes of traffic congestion or rear-end collisions. I recommend maintaining a steady speed before changing lanes and signaling properly before maneuvering. These rules are established by law to protect everyone's safety—following them saves money and ensures peace of mind.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How Long After Successful Driving Test Reservation Will You Receive Notification?

Usually, you will know whether the reservation is successful after one week. Below is relevant information about Subject 2: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment, referred to as the field driving skills test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on an S-curve. 2. For small cars, small automatic vehicles, small automatic passenger cars for the disabled, and low-speed trucks, the test items include: reversing into a garage, stopping and starting on a slope, parallel parking, driving on an S-curve, and turning at a right angle. 3. For three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles, the test items include: test piles, stopping and starting on a slope, and passing a single-plank bridge.
12
4
Share

What are the steps to replace car brake fluid?

Steps for replacing brake fluid yourself are as follows: 1. Open the hood: Park the vehicle on a flat surface, turn off the engine, open the engine compartment cover, and use a syringe to extract the fluid from the reservoir until it reaches the bottom. 2. Add brake fluid: Fill the reservoir with new brake fluid. Use a funnel during pouring to avoid spilling onto the engine compartment, as brake fluid is corrosive. 3. Remove the tire: Use a jack to lift the vehicle, starting with the rear wheels, and remove the tire. 4. Locate the bleed screw: Find the bleed screw on the brake caliper and remove the rubber dust cap. 5. Loosen the bleed screw: Use a wrench to loosen the bleed screw, attach a rubber tube to it, and connect the other end to a drain bottle. 6. Begin pressing the brake pedal: If two people are working, one can press the brake pedal while the other observes the fluid drainage. Pay attention to the color of the brake fluid in the rubber tube; old fluid is darker, while new fluid is lighter. If the fluid coming out of the tube is the lighter new fluid, the fluid replacement for that wheel is complete. Stop pressing the brake pedal, reinstall the tire, and repeat the process for the remaining three wheels.
4
4
Share

What Causes the Heater Not to Warm Up When the Water Temperature is Normal?

The correct way to use the heater is to start the engine and let it warm up first. Wait until the engine temperature gauge needle reaches the middle position before turning on the heater. However, if the heater remains cold, it indicates a problem with the vehicle's heating system. The structure of a car's heating system is relatively simple. Here are the possible reasons: 1. Start with the simplest and move to the more complex: If the heater is not warming up, the first thing to consider is whether the cabin air filter hasn't been replaced for a long time. This is the simplest yet most easily overlooked component. A dirty or clogged cabin air filter can significantly reduce airflow, thereby affecting the heating performance. 2. Insufficient coolant: This can also affect the heating function. Coolant is not only essential for cooling the engine but also serves as the heat transfer medium for the car's heating system. After absorbing heat from the engine, the coolant flows into the heater core, heating it up. Air passing through the heated core then blows out as warm air. 3. Clogged heater core: If coolant cannot flow into the heater core, or if the flow rate is reduced, it will impact the heating performance. 4. Thermostat malfunction can also affect heating: The thermostat is an automatic temperature-regulating device, similar to a water valve. It changes the circulation range of coolant to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the proper temperature range. If the thermostat fails and the main valve doesn't open, coolant cannot circulate through the radiator to dissipate heat, leading to engine overheating.
11
4
Share

Is Full Vehicle Film Necessary?

Full vehicle film is necessary. Here is relevant information about car film: 1. Functions of car film: Blocks ultraviolet rays, especially during hot summers when sunlight is intense. The film can block part of visible light and UV rays, helping to reduce interior temperature; Provides anti-explosion function; Enhances vehicle privacy by creating visual reflection when viewing from outside, making it harder to see inside. 2. Biggest disadvantage of dark film: While dark film offers better privacy protection compared to light film, in dim environments where visibility is already poor, the dark film further obstructs normal rearview mirror observation. Light-colored films obviously provide better visibility and make driving more effortless.
7
1
Share

What Are the Factors Causing Engine Vibration?

Engine vibration can be caused by the following factors: 1. Dirty air filter: Generally, it should be replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine vibration. Simply replacing the filter can solve the issue. 2. Spark plug lifespan: Spark plugs have a limited lifespan. After 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, affecting ignition. This is one of the most common issues, and replacing all spark plugs can resolve it. 3. Low idle speed: If the idle speed is too low and causes vibration, it indicates that it is beyond the control range of the computer. 4. Abnormal water temperature: High water temperature can cause early ignition timing, changes in the air-fuel mixture ratio, thinning of engine oil viscosity, and reduced lubrication performance. 5. Clogged fuel injectors: Impurities in gasoline can clog the injector nozzles, leading to inconsistent fuel injection among injectors. This causes uneven cylinder operation and engine vibration. 6. Carbon deposits and oil sludge clogging: Over time, carbon deposits and oil sludge can accumulate in the throttle body, idle valve, and intake ports, obstructing airflow and affecting idle stability, leading to vibration. 7. Low cylinder pressure: Engines come in 3-cylinder, 4-cylinder, 5-cylinder, 6-cylinder, and 8-cylinder configurations. If one cylinder is not functioning properly, it can result in a misfire, causing engine vibration.
17
0
Share

How to Prevent Mice from Entering the Car Engine Compartment?

Do not park the vehicle in areas prone to rodent infestation; maintain cleanliness of your vehicle; place rodent repellent packets or camphor in the engine compartment. Below are relevant details on preventing mice from entering the car engine compartment: 1. Reasons why mice enter the engine compartment: Cars often parked near garbage dumps or trash cans, where leftover food attracts mice to enter the engine compartment for feeding; during colder seasons like winter and spring, mice seek warmth in the engine compartment. 2. Methods to handle mice in the car: If mouse droppings and urine are found, take the car to a detailing shop for engine cleaning, and preferably perform an engine wiring harness maintenance, which both preserves the harness and repels mice, achieving two goals at once. If wiring or hoses are chewed, promptly visit an auto repair shop for repairs or replacements to prevent accidents. If mice are found in the engine compartment, immediately change the parking location and clean the engine.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.