Is Classroom Attendance Required for Subject One Exam?

What is the speed limit when visibility is below 100 meters on the highway?

When visibility is below 100 meters on the highway, the maximum speed should not exceed 40 kilometers per hour, and a distance of more than 50 meters should be maintained from the vehicle in front in the same lane. When visibility is below 200 meters on the highway, the speed should not exceed 60 kilometers per hour, and when visibility is below 50 meters, the speed should not exceed 20 kilometers per hour, and the vehicle should leave the highway as soon as possible. When visibility is below 100 meters on the highway, drivers need to turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers to ensure that vehicles in front and behind can easily detect the presence of the vehicle. If a motor vehicle is driving on the highway and encounters low visibility weather conditions such as fog, rain, snow, dust, or hail, the highway management department should issue speed limit and distance-keeping prompts through displays and other means.

20

1

Share

What Causes the Abnormal Noise When Engaging Fifth Gear?

Transmission housing damage, gear surface fracture, or improper transmission assembly can cause abnormal noise when engaging fifth gear. Transmission Housing Damage: Long-term wear and deformation of the transmission housing and bearing seat holes. This noise is loudest when engaging low gears and gradually decreases when shifting to higher gears, with the direct gear being the quietest. Gear Surface Fracture: Impact during meshing due to fracture of individual gear surfaces. Engaging this gear position will cause strong impact and vibration, leading to resonance in the transmission housing. Improper Transmission Assembly: Improper replacement of gears, needle bearings, or bushings in a specific gear position, or abnormal assembly clearance, resulting in poor gear meshing and abnormal noise during transmission. Solutions for Abnormal Noise When Engaging Fifth Gear: Fully depress the clutch, check and tighten the linkage mechanism, replace damaged clutch plates, master the correct gear-shifting method (ensure full engagement), check the clutch if separation is incomplete, and tighten the gear lever if loose (due to loose connecting rubber bushings).

5

1

Share

How to Clean and Disinfect a Car Air Conditioner?

You can use a car air conditioner disinfectant cleaner to clean and disinfect the car air conditioner. The steps for cleaning and disinfecting the car air conditioner are as follows: 1. After starting the car, turn on the air conditioning cooling switch, set the air volume to the minimum, adjust the temperature to the highest, and ensure the air conditioning system is in external circulation mode. 2. Place your hand near the air conditioning intake vent; you will feel air being drawn into the car. Spray the air conditioner disinfectant cleaner into the intake vent, and the cleaner spray will flow through the air conditioning evaporator into the car cabin with the air. 3. Note that after spraying the cleaner, the car doors and windows should be closed to achieve better disinfection. Also, ensure there are no people or pets in the car during the cleaning process. The cleaning process should last about 15 minutes. After completing the cleaning, open the windows for ventilation. 4. Remove the air filter and clean it with a high-pressure air gun. If it is too dirty, replace it.

18

2

Share

Can Points Be Deducted After Registering Someone Else's Vehicle?

Registering a non-personal motor vehicle allows for point deductions. When handling traffic violations for a non-personal vehicle, you need to bring your own ID, the vehicle's registration certificate, along with the violator's driver's license and ID to the traffic management department's violation processing window. Below is relevant information about driver's licenses: 1. Small cars: To apply for small cars, small automatic transmission cars, or light motorcycles, the applicant must be between 18 and 70 years old. 2. Trucks: To apply for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. 3. Buses: To apply for city buses, medium-sized buses, large trucks, trolleybuses, or trams, the applicant must be between 21 and 50 years old. 4. Tractor trucks: To apply for tractor truck licenses, the applicant must be between 24 and 50 years old. 5. Large passenger vehicles: To apply for large passenger vehicle licenses, the applicant must be between 26 and 50 years old.

15

2

Share

What is the Easy Solution to Squeaky Brakes?

The easy solutions to squeaky brakes are as follows: 1. The wear indicator emits a sharp noise as a replacement reminder: When the brake pads wear beyond the specified warning value, the wear indicator will emit a piercing noise to alert the owner to promptly inspect or replace the brake pads at a repair shop. If not replaced in time, the metal wear indicator will carve fatal grooves into the brake disc, rendering it unusable. Additionally, worn-out brake pads may lead to brake failure, causing serious accidents. 2. Severely worn brake discs produce abnormal noises: If the brake disc is severely worn, the outer edges not in contact with the brake pads will form a raised rim relative to the friction surface. If the corners of the brake pads rub against this raised edge, abnormal noises may occur. There are generally two solutions: either have the edges of the brake pads ground down at a repair shop to avoid contact with the raised edge of the brake disc, or directly replace the brake disc. 3. A sharp, piercing noise when braking: Many owners of new cars assume that a sharp noise when braking indicates a quality issue. However, new brake pads and discs require a break-in period. When braking, if the pads happen to rub against a hard spot, this noise may occur. Applying some lubricant at a repair shop can help reduce the noise.

16

4

Share

Will speeding in a national highway section with average speed cameras result in penalty points?

Speeding in a national highway section with average speed cameras will result in penalty points. Exceeding the speed limit by 20% on national highways incurs a fine and 3 penalty points on the driver's license. Drivers exceeding the speed limit by less than 10% will receive a warning. Exceeding the speed limit by more than 10% but less than 20% results in a fine and 3 penalty points. Exceeding the speed limit by more than 20% but less than 50% incurs a fine and 6 penalty points. Exceeding the speed limit by more than 50% results in 12 penalty points and a fine. Average speed cameras work by placing two adjacent monitoring points on the same road section. The system calculates the vehicle's average speed based on the time taken to pass between the two points and determines if the vehicle has exceeded the speed limit. When you see an "average speed camera" sign by the road, reduce your speed to within the limit. If you are caught speeding at the first point, be sure to reduce your speed below the limit before reaching the second point, as long as the calculated average speed between the two points does not exceed the limit.

15

0

Share

Is Classroom Attendance Required for Subject One Exam?

What is the speed limit when visibility is below 100 meters on the highway?

What Causes the Abnormal Noise When Engaging Fifth Gear?

How to Clean and Disinfect a Car Air Conditioner?

Can Points Be Deducted After Registering Someone Else's Vehicle?

What is the Easy Solution to Squeaky Brakes?

Will speeding in a national highway section with average speed cameras result in penalty points?

What to Do If Your Driver's License Has Been Deducted 12 Points for Two Years Without Attending the Required Course?

How to Remove a Broken Spark Plug from the Cylinder?

What are the impacts of driving through water on a car?

How Many Cylinders Does the BMW 3 Series 320 Have?