Is Changan a joint venture or domestic car?

Does Not Pressing the Lock Button Damage the Transmission?

Not pressing the lock button can damage the transmission. The working principle and function of the lock button are introduced as follows: Working Principle of the Lock Button: The lock button refers to a ratchet installed on the tail section housing of the transmission when the automatic transmission vehicle is in P gear. On the corresponding output shaft, there is a ratchet disk that matches the ratchet. When in P gear, the ratchet is released to engage with the disk, achieving the vehicle's locking function. Function of the Lock Button: It serves as a method to prevent misoperation. For example, when shifting from P to R, the button must be pressed to engage the gear. In summary, whenever entering a gear that could cause reverse impact on the transmission, the system will lock, requiring the button to be pressed before operation.

18

2

Share

Why does the front wheel wobble when turning the steering wheel to full lock?

When turning the steering wheel to full lock and feeling the front wheel wobble, it is due to the abnormal noise caused by the friction between the car's spring steel plate and the steering wheel. Here are some relevant introductions about cars: 1. Maintenance: Engine oil level check. When the engine is in a hot state, never open the radiator cap, otherwise you may be scalded by the splashing coolant or high-temperature steam. 2. Precautions: Clutch master cylinder fluid level check. If the clutch fluid level is between the high and low marks, it is normal. If it is below the standard line, the master or slave cylinder piston cup may be damaged. When the engine is running, there will be difficulty in shifting gears or inability to shift gears. Please go to the nearest repair station for inspection immediately.

17

0

Share

What is T-Box in Vehicle Networking?

T-Box in vehicle networking refers to the onboard T-Box in the vehicle networking system. The introduction and functions of the vehicle networking system are as follows: Introduction to the Vehicle Networking System: The vehicle networking system consists of four parts: the main unit, onboard T-Box, mobile app, and backend system. The main unit is primarily used for audio-visual entertainment and vehicle information display; the onboard T-Box is mainly used for communication with the backend system/mobile app, enabling the mobile app to display and control vehicle information. Functions of the Vehicle Networking System: This feature can help users remotely start the vehicle, turn on the air conditioning, and adjust the seat position to a suitable setting.

8

4

Share

How Many Liters of Engine Oil Should Be Added to a Jetta?

Jetta cars generally require about 4 liters of engine oil. The exact amount may vary slightly depending on the level of emissions. Typically, a 4-liter can is sufficient. Introduction to engine oil: 1. Gasoline appears as a transparent liquid, primarily composed of various hydrocarbons ranging from C4 to C10, and is classified into three grades based on octane number: 90, 93, and 97. 2. Gasoline has a high octane number and excellent anti-knock properties, making it suitable for high-compression ratio carburetor-type gasoline engines. It can enhance engine power and reduce fuel consumption. 3. Gasoline has good stability, is less prone to oxidative deterioration during storage, transportation, and use, and is non-corrosive to engine components and oil storage containers.

3

4

Share

What does reverse ECU mean?

Reverse ECU refers to the vehicle's onboard computer. Below is relevant information about reverse ECU: 1. Concept: The ECU serves as the brain of a car. Functionally speaking, it is a dedicated automotive microcomputer controller. Like a regular computer, it consists of a microprocessor (CPU), memory (ROM, RAM), input/output interfaces (I/O), analog-to-digital converters (A/D), as well as shaping circuits, drivers, and other large-scale integrated circuits. 2. Function: The electronic control unit's function is to perform calculations, processing, and judgments on the information input from sensors such as the air flow meter based on its stored programs and data, then output commands to provide the fuel injector with electrical pulse signals of specific widths to control fuel injection quantity. The electronic control unit consists of a microcomputer, input/output circuits, and control circuits.

15

2

Share

What is the tutorial for replacing the battery in a Tiida car key?

Tiida car key battery replacement tutorial: 1. Locate a small switch on the back of the car key and flip it. 2. Pull out the top part by gripping it firmly. 3. After removing the mechanical key, you will see a small groove. 4. Use a flathead screwdriver to pry open the car key cover along the groove. Once a gap appears, manually open it. 5. With the key cover open, remove the old battery and replace it with a new one (pay attention to the polarity). 6. Reattach the key cover and insert the mechanical key back in. How the remote key works: First, the key emits a weak radio wave, which is received by the car antenna. The electronic control unit then identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the lock/unlock action.

5

1

Share

Is Changan a joint venture or domestic car?

Does Not Pressing the Lock Button Damage the Transmission?

Why does the front wheel wobble when turning the steering wheel to full lock?

What is T-Box in Vehicle Networking?

How Many Liters of Engine Oil Should Be Added to a Jetta?

What does reverse ECU mean?

What is the tutorial for replacing the battery in a Tiida car key?

Can a Total Loss Vehicle Pass Normal Inspection After Repair?

Does Navigation Indicate Which Lane to Take?

What does it mean when the TC light comes on in a Buick car?

Does Installing a One-Button Start System Affect the Car?