Is Car Seat Modification Illegal?

1 Answers
ClaraLee
07/29/25 5:25pm
Modification of motor vehicle seats is illegal. The following are the relevant regulations: 1. Anti-collision devices: Installation of front and rear anti-collision devices on small and micro passenger vehicles is allowed. 2. Windshields: Installation of windshields, water tanks, toolboxes, and spare tire racks on freight motor vehicles is allowed. 3. Interior decoration: Adding interior decorations to motor vehicles is allowed. 4. Illegal modifications: Any changes to the brand, model, or engine type of the motor vehicle, or alterations to the registered appearance and technical data of the motor vehicle, other than the above, are considered illegal modifications.
Was this review help?
15
0
Share
More Forum Discussions

What is the standard tire pressure for the Haval H6?

The normal tire pressure range for the Haval H6 is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Haval H6's tire pressure monitoring can be viewed on the dashboard. The vehicle's built-in tire pressure monitoring system provides automatic alarm alerts without manual operation. The tire pressure monitoring system ensures safe and effective driving by directly reflecting the condition of the car's tires. Generally, a tire pressure exceeding 2.8bar is considered too high, while a pressure below 2.0bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, an alarm is triggered when pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. A damaged sensor must be replaced with a new one.
19
2
Share

What kind of oil makes roads smooth and soft?

Asphalt. Asphalt road: A road paved with asphalt concrete. The materials required for paving an asphalt road include graded aggregates, crushed stone gradation, asphalt mastic, aggregates, stone powder, etc. The necessary tools are motor graders, excavators, vibratory rollers, trucks, graders, asphalt distributors, pavers, pressure oil sprayers, etc. Additional information: Use of asphalt roads: The asphalt in asphalt roads is liquid, and the dark-colored surface easily absorbs heat, causing some degree of dissolution. Therefore, it may slightly melt in hot weather, and any damage needs to be repaired promptly. Cement roads, on the other hand, are relatively more solid with gravel, belonging to rigid pavements, and have a longer service life.
19
2
Share

Is Biomass Ethanol Harmful to Engines?

No, on the contrary, it is beneficial. 1. Biomass alcohol exhaust cleaner: It is a new type of high-cleanliness vehicle fuel, mainly composed of methanol, which enables complete combustion in engine conditions, significantly reducing harmful exhaust emissions and smoke formation, improving the working environment for drivers and enhancing their physical and mental health. 2. Carbon deposit removal: It effectively prevents and removes carbon deposits in spark plugs, combustion chambers, valves, exhaust pipes, mufflers, etc., improving engine volume utilization and enhancing vehicle power. 3. Complete combustion: It reduces the formation of large amounts of black smoke caused by poor atomization and incomplete combustion of gasoline. Gasoline additives can effectively lower combustion activation energy, improve atomization efficiency, allowing even the non-combustible colloids in the fuel to burn fully, thereby eliminating black smoke and reducing emissions.
13
4
Share

What are all the button functions of the Cadillac XT4?

All the button functions of the Cadillac XT4 are as follows: Center console buttons: Electronic Stability Program (ESP), can be manually turned off in conditions such as snow, rain, or muddy roads. It is generally recommended to keep it on during normal driving to prevent skidding or fishtailing. Parking radar/camera, alerts the driver about surrounding obstacles through images and warning sounds. Forward Collision Mitigation (FCM), when the vehicle gets too close to the car in front, the dashboard will alert the driver to brake, and a buzzer will also sound an alarm. If the driver continues not to press the brake pedal, the system will automatically brake to reduce the risk or severity of a collision. Auto Start-Stop, temporarily turns off the engine at traffic lights. Door buttons: Window lock button, one-touch up/down window control switch, exterior mirror adjustment switch (angle adjustment, folding function), central lock button (located on the door handle). Roof buttons: Sunroof switch, sunshade switch, interior light switch, lights that turn on/off with the door.
16
4
Share

How long can you park in the emergency stopping area inside a tunnel?

There is no fixed time regulation specifying how long you can park in an emergency stopping area. An emergency stopping area refers to a temporary stopping zone on highways and first-class roads, designated for vehicles that encounter sudden malfunctions or other emergencies requiring immediate parking. Vehicle owners can remain in the emergency stopping area until they have dealt with the accident or resolved the vehicle malfunction before leaving. The regulations for using emergency stopping areas permit parking under the following circumstances: 1. A malfunction occurs while driving. 2. Traffic police signal the vehicle to stop immediately. 3. After a traffic accident, self-handling is permitted according to regulations.
10
4
Share

Clockwise or Counterclockwise Before Getting in the Car?

For the Subject 3 driving test, whether before getting in the car or starting, it is necessary to conduct thorough checks. Walk counterclockwise around the car to inspect the surrounding conditions and confirm safety before entering. After getting in, check if the instruments and lights inside the car are reset. Before starting, ensure the doors are closed and seat belts are fastened securely. Key points to note for the Subject 3 test: 1. Gear shifting: Mismatching the vehicle speed and gear can result in failure. Remember to use low gear for low speed and high gear for high speed, shifting as needed. However, don’t avoid shifting gears out of fear of mistakes; driving the entire test in low gear will also lead to failure. 2. Signaling: For actions like lane changes, overtaking, and turns, students must not skip using the turn signals. Additionally, after activating the turn signal, wait for more than three seconds before turning the steering wheel. If the turn signal doesn’t turn off automatically after completing the maneuver, manually reset it. 3. Courtesy: Throughout the Subject 3 test, students must adhere to safe and civilized driving regulations. When passing through crowded intersections, bus stops, or school zones, reduce speed in advance and yield when necessary, stopping if required.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.