Is Car Heat Insulation Film Useful?

1 Answers
Hillary
07/29/25 7:57pm
Car heat insulation film is effective. The film reflects infrared rays, reducing the temperature inside the car, which can also alleviate the burden on the air conditioning system, save fuel, and slow down the aging of car accessories. It is also known as explosion-proof film because when the glass shatters, the fragments will stick to the film and not fly out to cause injury. Related introduction: 1. Function of heat insulation film: It provides excellent heat insulation, lowers the car temperature, reduces the load on the air conditioning system, and saves fuel. 2. Working principle: The heat insulation film mainly uses radiation and convection to insulate heat. Without the need to darken the car glass film, it can achieve higher heat insulation efficiency compared to car glass films without a reflective layer.
Was this review help?
17
5
Share
More Forum Discussions

Can Front Fog Lights Be Installed on a Car?

Front fog lights cannot be installed on a car. From a legal perspective, private modifications to vehicles are not permitted. If you wish to install fog lights, it is recommended to visit a 4S shop or a certified modification shop that offers warranties. Choose original fog lights that match your car model, and pay attention to circuit safety issues such as switches, relays, fuses, and aftermarket lighting during installation. Below is some relevant information about fog lights: 1. Fog lights are yellow with a longer wavelength, which allows them to illuminate over greater distances and maintain good visibility in adverse weather conditions. 2. The primary benefit of fog lights for car owners is their long illumination range. Whether or not to install them is up to the owner's discretion. When purchasing a car, it is advisable to opt for models with LED lights, as these can not only serve as a direct replacement for fog lights but also enhance the car's overall appearance.
2
3
Share

What is the fuel consumption of the Lincoln Navigator?

The Lincoln Navigator has a combined fuel consumption of 11.4-12.5L. Here is some extended information about the Lincoln Navigator: 1. The Lincoln Navigator is equipped with a 3.5TT new engine paired with a new 10-speed 2F automatic transmission, offering either two-wheel or four-wheel drive. It has a maximum output power of 224 kW, a 127L fuel tank, full-time four-wheel drive, and body dimensions of 5636/2123/1933mm (length/width/height). 2. It comes with a range of luxury features, including optional heated and cooled front seats, power-deployable running boards, power-folding third-row seats, and a power liftgate, enhancing both comfort and convenience for drivers and passengers.
14
4
Share

What to Do If a Mouse Enters the Car Engine Compartment?

If you find that a mouse or small animal has entered the engine compartment, you can first use a damp cloth (without dripping water) to wipe all accessible areas inside the compartment, then place a bag of mothballs on the engine cover. If possible, it is best to change the usual parking spot for a week before returning to the original location. Below are some methods for dealing with mice in the engine compartment: 1. Pay attention to parking locations and avoid areas near trash bins. 2. After discovering mice in the vehicle, clean promptly, especially if the engine shows abnormalities. Thoroughly wash away any traces of the mouse’s scent to prevent further visits. 3. Regularly spray deterrent liquids, such as lemon water, around the parking area.
6
3
Share

How to reset the tire pressure of the 2019 Lavida?

19 Lavida tire pressure reset method is as follows: 1. Press and hold the black square button "tire pressure button" in front of the gear shift for 15 seconds. 2. The function of the tire pressure monitoring system is to automatically monitor the tire pressure in real time during driving and alert the driver in case of tire leakage or low pressure. 3. If the tire pressure warning light comes on, it is necessary to immediately check and go to a repair shop for maintenance to prevent dangers such as tire blowouts. Tire pressure actually refers to the air pressure inside the tire. The engine is very important, it is equivalent to the heart of the car. Once the engine is damaged, it may lead to the end of the car's life. The tire pressure is equivalent to the blood pressure of the car. High or low tire pressure has a huge impact on the performance and power of the car, so it should be paid more attention to.
5
3
Share

What are the precautions for beginners driving on the highway?

Precautions for beginners driving on the highway include: 1. Beginners must pay attention to traffic rules and display a novice driver sign. If you are a beginner, please adhere to traffic regulations and attach a novice driver sign at the back of your car. This will alert other drivers, who will likely be more lenient towards you. 2. For your first time on the highway, it is advisable to have an experienced driver accompany you. 3. Conduct a vehicle inspection before entering the highway. A pre-trip vehicle check is essential, especially for tires, brakes, spare tires, water, oil, etc. 4. Pay attention to speed limits and minimum speeds on the highway. It's important to understand the speed limits on the highway. It's not necessary to drive at the maximum speed limit, but beginners should be particularly mindful of the minimum speed. Every highway has a minimum speed, so never drive below it, as it can be as dangerous as speeding. 5. Lane selection matters. If there are two lanes, drive in the leftmost lane. Beginners usually don't reach the maximum speed limit, so frequently check the rearview mirror. If someone is overtaking you, safely move aside to let them pass. 6. Do not hesitate when overtaking on the highway. The shorter the overtaking time, the safer it is. You might slightly exceed the speed limit during overtaking, but don't worry. The car's speedometer typically shows 5% lower than the actual speed, so even exceeding the limit by 10% during overtaking is safe. 7. Avoid driving behind large vehicles or letting them follow you. 8. When exiting the highway, merge early. Upon seeing exit signs indicating 1.5km or 1km ahead, merge into the outermost lane in preparation for exiting.
20
5
Share

How to Replace the Battery in a BMW X1 Remote Key?

BMW X1 remote key battery replacement steps are as follows: 1. Gently insert a small blade into the ear position of the BMW X1 key to create a slight gap, then use a flat-head screwdriver to pry open the entire casing of the BMW X1 key starting from the ear. 2. Remove the circuit board. 3. Use a soldering iron to remove the old battery and replace it with a new one. 4. Reinstall the circuit board into the key casing, apply a small amount of 502 glue on the edges of the casing, and press the two halves of the casing together. Below is an introduction to the BMW X1 remote key: The BMW X1 remote key includes an unlock button, lock button, and tailgate unlock button. The unlock button: (Unlocks the following entrances: the driver's side door and fuel tank cover. All doors, tailgate, and fuel tank cover.) Simply hold down the unlock button, and the windows and glass sunroof will automatically open. Press and hold the unlock button again, and the windows and glass sunroof will automatically close.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.