Is Car Film Application Process Troublesome?

1 Answers
VanEvangeline
07/25/25 4:56pm
Not troublesome. Applying transparent film to a car does not require registration. However, if you apply color-changing film to the car, you need to register it at the vehicle management office. According to the current motor vehicle registration regulations, if the area of the color change does not exceed 30% of the vehicle's body, no change registration is required. If the color change area exceeds 30%, registration at the vehicle management office is mandatory, and the new color must be one that was originally registered when the vehicle left the factory. Steps for film application registration: 1. Fill out the "Motor Vehicle Change Registration Application Form": Then submit the "Identity Proof of the Vehicle Owner and Driver," "Motor Vehicle Registration Certificate," "Motor Vehicle Driving License," and standard photos of the vehicle applying for the change registration. 2. Prohibited colors: You can modify the vehicle's body color, engine, fuel type, and frame number, but three colors are reserved for special vehicles and cannot be used: red for firefighting, yellow for engineering rescue, and white over blue for national administrative law enforcement. Replacing the front bumper is considered altering the vehicle's shape and can be done after approval, but modifications like raising the chassis to enhance off-road performance are not allowed. If illegal modifications are discovered during the annual inspection, the vehicle must be restored to its original condition. 3. Prohibited modifications include widening tires, altering the intake system, and modifying the exhaust system: According to the "Motor Vehicle Registration Measures" of the Ministry of Public Security, changing tire specifications, modifying the intake system, or altering the exhaust system are not permitted. Such modifications may affect engine power and driving safety. Owners of illegally modified vehicles will be fined 500–1,000 yuan and required to restore the vehicle to its original condition.
Was this review help?
18
2
Share
More Forum Discussions

How to Check Tire Production Date When Taking Delivery of a Car?

To check the tire production date when taking delivery of a car, look for the DOT mark on the outer side of the tire. The last four digits of this mark represent the production date of the tire. Here are some relevant precautions regarding tires: 1. When purchasing tires, always check the production date and avoid buying tires with outdated production dates. 2. Tires are rubber products and will age even if not used. Regularly check tire pressure and inspect the tire surface for any damage during daily use. 3. The sidewall of a tire is relatively fragile, and if it is scratched or punctured, it cannot be repaired. It is recommended to replace tires every four years, even if the mileage driven within those four years is minimal.
14
3
Share

Is the 7 Series New Energy equipped with a 2.0T engine?

7 Series New Energy is equipped with a 2.0T engine. The 7 Series New Energy is a plug-in hybrid vehicle that uses a 2.0T engine, paired with an electric motor that delivers a maximum power of 83kW and a maximum torque of 250Nm. The 7 Series is a large luxury sedan under BMW, with dimensions of 5250mm in length, 1902mm in width, and 1498mm in height, and a wheelbase of 3210mm. Externally, the 7 Series features a new front grille and headlight assembly, with the iconic double-kidney grille being 40% larger than the previous model. The M760Li model is marked with a V12 badge on the C-pillar, and the side window edges are adorned with exclusive black trim.
10
1
Share

How to turn on the low beam lights on a Mercedes GLA?

On the Mercedes GLA, there is a set of light combination switches on the left side of the steering wheel. At night, rotating the combination switch forward one notch turns on the dashboard lights, and rotating it another notch turns on the low beam lights. The Mercedes GLA daytime running lights can be adjusted using a dedicated knob on the light control lever. More details are as follows: 1. The low beam lights should be turned on at night when there are streetlights on the road. They should also be turned on when encountering pedestrians on the roadside, as well as on narrow roads, narrow bridges, and curves. 2. When encountering oncoming traffic at night, if the high beam lights of the Mercedes GLA are on, they must be turned off until the oncoming vehicle has passed. If not turned off, the high beams can dazzle the other driver and potentially cause an accident. This is also a standard of civilized driving. 3. At night, when approaching an intersection, it is necessary to switch between high and low beams twice. However, constantly rotating the switch back and forth can be inconvenient. The Mercedes GLA combination switch has a shortcut: when in low beam mode, lifting the combination light switch upwards turns it into high beam mode. Releasing the switch returns it to low beam mode. This method is simple and convenient, especially useful for switching lights at intersections at night.
10
1
Share

Are Turbocharged Cars More Fuel-Efficient?

Turbocharged cars are not necessarily more fuel-efficient. The details are as follows: 1. Comparison of the same displacement: A 1.8L engine is definitely more fuel-efficient than a 1.8T engine. Turbocharging increases power by allowing more air into the engine to burn more fuel, so it inevitably consumes more fuel than a naturally aspirated engine. 2. Comparison of the same power: A 1.8T engine corresponds to a naturally aspirated engine of similar power, such as a 2.4L. However, the former still consumes fuel at the rate of a 1.8L engine at low speeds or in congested areas, making it more fuel-efficient compared to the latter's larger displacement naturally aspirated engine. Precautions for using turbocharging: 1. Poor fuel quality: When the engine uses poor-quality fuel, some of the fuel does not burn completely and turns into particles that pass through the exhaust system, adhering to the turbo blades. Over time, this can cause damage to the turbo blades. 2. Engine carbon deposit cleaning: When cleaning carbon deposits, these deposits are expelled from the engine in particle form along with the exhaust gas and adhere to the turbo blades, increasing the turbo's load. Gradually, this can damage the bearings and blades in that area.
8
2
Share

How many liters of brake fluid need to be replaced?

Brake fluid needs to be replaced with 1 liter. When replacing, it is necessary to use brake fluid of the same grade as the original vehicle, which is indicated on the brake fluid cap. Here is some relevant information about brake fluid: 1. When replacing brake fluid, pay attention to the brake fluid model marked on the brake fluid reservoir cap. Different vehicle models use different types of brake fluid. Currently, most models use DOT-4 or DOT-5 brake fluid. 2. The replacement interval for brake fluid also depends on the climate and humidity of the region where the vehicle is located: in tropical regions, replace annually or every 20,000 kilometers; in cold regions, replace every 2 years or 40,000 kilometers; in temperate regions, replace every 3 years or 60,000 kilometers.
6
1
Share

Which is Better: Electronic Parking Brake or Hand Brake?

Electronic parking brakes and hand brakes each have their own advantages. The specific differences between the two are as follows: 1. Space occupation: Hand brakes occupy more space; electronic parking brakes are aesthetically pleasing, convenient, and space-saving. 2. Functionality: Hand brakes can be used for drifting maneuvers; electronic parking brakes cannot perform drifting. 3. Control system: Hand brakes are not affected by the battery; electronic parking brakes may malfunction or fail when the battery is not working properly. Below is an introduction to hand brakes: The professional term for a hand brake is an auxiliary brake, which operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the hand brake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use can reduce its effectiveness.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.