Is Car Color Change Film Illegal?

1 Answers
StBenjamin
07/25/25 4:20pm
Applying color change film to a car is legal. Here is an introduction to car color change regulations: 1. There are relevant requirements: if the color change exceeds 30% of the car body, it is necessary to go to the vehicle management office to change the motor vehicle driving license, and it will not affect subsequent vehicle inspections. However, not all color combinations are allowed. The color change cannot imitate police cars, taxis, fire and ambulance vehicles, or use chrome-plated film styles. Additionally, the color change cannot exceed three colors. 2. Documents required for car color change: (1) Original and photocopy of the ID card of the vehicle owner. (2) Original "Motor Vehicle Registration Certificate". (3) Original "Motor Vehicle Driving License". 3. When handling the color change procedure, the handler needs to bring the original and photocopy of the vehicle owner's ID card, motor vehicle registration certificate, motor vehicle driving license, and other documents. If it is handled by an entrusted agent, the original and photocopy of the agent's ID card should also be submitted.
Was this review help?
18
4
Share
More Forum Discussions

What causes the abnormal noise when starting a BMW X3?

BMW X3 starting abnormal noise is mainly caused by brake system failure or foreign objects in the tires. Brake system failure: In southern regions, due to the humid and rainy climate during spring and autumn, long-term driving in such conditions can gradually cause brake discs to rust. Especially for vehicles whose chassis have been submerged in water, the brake discs are more prone to oxidation and rust. Foreign objects in tires: When there is abnormal noise during starting, foreign objects may be lodged in the tread patterns of the wheels, causing the noise. These could be screws, stones, or other hard objects. Simply removing the foreign objects from the wheels can resolve the noise issue.
7
3
Share

Why does an Audi shake when parked?

Audi shaking when parked can be caused by severe engine carbon buildup, ignition system failure, or oil pressure issues. Detailed explanations of the causes: Severe engine carbon buildup: Engine carbon buildup is the main cause of car shaking. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the fuel injector during a cold start is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making the car prone to shaking. Ignition system failure: Excessive carbon buildup on the spark plugs or overly large ignition gaps can cause ignition failure. Oil pressure issues: Abnormal fuel pump pressure or incorrect readings from the intake pressure sensor can lead to poor fuel pump performance, causing the car body to shake.
16
2
Share

How to Remove Bird Dropping Stains from a Car?

Drip water onto the dried bird droppings, then cover them with a wet wipe or damp cloth. Wait for 2-3 minutes before wiping them off directly. There are stain removal waxes available on the market, such as Turtle Wax, which are highly effective in removing bird droppings. These products not only clean but also provide waxing and polishing effects. After soaking a clay bar in water, rubbing it back and forth over the bird droppings can also yield excellent results. Clay bars are very effective at removing stubborn stains and are one of the must-have items for car washing.
8
5
Share

How to Remove the Cabin Air Filter of a Classic Focus?

Classic Focus cabin air filter removal method: 1. The filter is located next to the accelerator pedal on the driver's side. Use a Phillips screwdriver to turn the screws counterclockwise and remove them; 2. Remove the cover plate and take out the filter; 3. During installation, pay attention to the filter's orientation - the arrow should point toward the rear of the vehicle. The Classic Focus is a compact car with body dimensions of 4368mm (length) × 1823mm (width) × 1483mm (height). In terms of power, the Classic Focus is equipped with a 1.5T turbocharged engine (model CAF384WQ06) delivering 174 horsepower, maximum power of 128kW, and peak torque of 243Nm.
16
3
Share

What does the Nissan Sunny B1068 fault code mean?

B1068 fault code indicates a short circuit in the supplemental airbag module. This issue is mainly related to the primary and secondary airbags. First, check if there are any abnormalities in the wiring connections. Location of the airbag module: The airbag module is generally located in front of the gear shift lever or underneath it. To access it, lie down on the seat, turn the key to the on position, remove the screws on the steering wheel, and take off the steering wheel to see the airbag module. Introduction to airbags: An airbag is a device that inflates to protect passengers before a secondary collision occurs during a crash. As an auxiliary device to the seat belt's occupant restraint system, the airbag is referred to as the airbag system.
5
1
Share

Where to Check the Fuel Consumption Display on Oshan X5?

The fuel consumption displayed on the instrument panel can be accessed using the buttons on the right side of the steering wheel. The displayed fuel consumption is the ratio of the total distance traveled to the total fuel consumed. The average fuel consumption shown on the instrument panel is an overall average, which also includes instantaneous fuel consumption. It is highly influenced by road conditions and driving speed, so it should be used as a reference only. This function can be operated using the multi-function steering wheel. By pressing the up and down buttons on the right side to navigate to the vehicle information, and then using the left and right buttons to switch to the average fuel consumption.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.