Is Car Anti-Fog Spray Useful?

1 Answers
DiJordan
07/29/25 2:11pm
Car anti-fog spray is useful. Introduction to car anti-fog spray: Car anti-fog spray is effective in preventing fog on car windows. It is mainly used for anti-fog purposes on both the interior and exterior of car windows, reducing condensation caused by moisture on glass and plastic surfaces, thereby decreasing the occurrence of traffic accidents. The anti-fog spray utilizes a new generation of dispersing anti-drip materials and nano organic active agents. The glass surface treated with the anti-fog spray forms a super-hydrophilic nano-film, which turns the fog into a low-freezing-point mixture upon contact, thus preventing fog formation. Uses of car anti-fog spray: When condensation occurs on the inner side of the car windshield during rainy, foggy, or cold weather, use a clean towel or tissue to evenly apply the product on the condensation area to achieve an anti-fog effect. It effectively removes dirt and oil stains from the car windshield, making it as clear as new, improving visibility, and greatly enhancing driving safety.
Was this review help?
14
1
Share
More Forum Discussions

How Often Should a Truck Be Maintained?

Trucks generally require their first maintenance at 5,000 kilometers. The engine oil should be changed every 5,000 kilometers. During the oil change, it's recommended to replace all three filters simultaneously, while the gear oil should be replaced every 20,000 kilometers. Wheel maintenance should be performed every six months. For long-distance trucks or dump trucks, maintenance should be done monthly, with brake adjustments every half month. Basic maintenance items for large trucks include: Changing the engine oil and three filters (oil filter, air filter, and diesel filter); Wheel hub maintenance: Due to their heavy load capacity, large trucks use tapered bearings that require high-grade grease. Truck first-level maintenance inspection items: Replace engine oil, oil filter, fuel filter, and air filter; Check if the coolant level meets specifications; Inspect the brake and clutch fluid levels; Verify if the power steering fluid reservoir level complies with regulations, and check all system oil pipe interfaces for leaks.
10
0
Share

How often should truck wheels be maintained?

Trucks generally require their first maintenance at 5,000 kilometers. Engine oil should be changed every 5,000 kilometers. During oil changes, it's recommended to replace all three filters simultaneously, with gear oil being replaced every 21,000 kilometers. For wheel maintenance, it should be performed every six months. For long-distance trucks or dump trucks, maintenance should be conducted monthly, with brake adjustments every half month. Basic maintenance items for large trucks include: Changing engine oil and three filters (oil filter, air filter, and diesel filter); Wheel hub maintenance: Due to their heavy load capacity, large trucks use tapered bearings that require high-grade grease. Truck primary maintenance inspection items: Replace engine oil, oil filter, gasoline filter, and air filter; Check if the coolant level meets specifications; Inspect brake and clutch fluid levels; Verify if the power steering fluid reservoir level complies with standards, and check all system oil pipe connections for leaks.
15
0
Share

What is the tire size of the Focus?

The Focus has three tire size models: 205/60R16, 235/40R18, and 215/50R18. The numbers 205, 235, and 215 represent the tire's section width in millimeters (205mm, 235mm, and 215mm, respectively). The numbers 50, 40, and 60 represent the tire's aspect ratio. The letter R stands for radial tires. The numbers 16 and 18 represent the rim diameter in inches (16 inches and 18 inches, respectively). If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, and ensure the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not completely remove the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire. Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
19
0
Share

What Are the Series of Goodyear Tires?

Goodyear tires are categorized by usage into seven major types: performance tires, passenger car tires, SUV tires, off-road tires, winter series, commercial truck series, and commercial bus series. Among these, passenger car tires and SUV tires are the most common for household use. Introduction to Goodyear Tires: The Goodyear Tire & Rubber Company was founded in 1898 in the United States and has a history of over a hundred years. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. Today, Goodyear employs more than 80,000 people worldwide. Precautions for Using Goodyear Tires: Be sure to perform the following routine maintenance: maintain proper tire pressure. The vehicle manufacturer specifies the correct tire pressure, which can be found on the door edge, door pillar, glove compartment, or fuel tank cap. This correct pressure is also listed in the owner's manual.
6
1
Share

Is the Vehicle Inspection Department Closed During National Day?

In general, vehicle annual inspections cannot be conducted in most places during National Day. However, some regions may offer inspection services during the holiday to accommodate working individuals. It is advisable to check with the local vehicle management office for specific arrangements. You will need to visit the local Vehicle Management Office and the vehicle inspection center for an online inspection. During the Mid-Autumn Festival and National Day holidays, official business is usually suspended. If your vehicle inspection is due soon, it is recommended to plan ahead. Locations for Vehicle Inspection: Vehicle inspection requires visits to both the Vehicle Management Office and the inspection station. The Vehicle Management Office handles applications, replacements, renewals, and inspections of motor vehicle driver's licenses, as well as other related services for vehicles and drivers. The inspection station, on the other hand, conducts comprehensive performance tests on motor vehicles. While the two are related, their functions are distinct. Vehicles eligible for the exemption inspection label must meet the following conditions: Non-commercial passenger cars (including large passenger cars) and other small and mini passenger vehicles registered within 6 years; Excluding vans, 7-seater, and larger vehicles; Excluding vehicles that have not been registered for over 4 years since the date of manufacture.
7
2
Share

What is a K-Car?

K-Car is a unique type of micro commuter vehicle native to Japan. Typically, these cars have engines under 660CC and are no longer than 3.2 meters. They are particularly fuel-efficient, with brands like Suzuki, Subaru, and Toyota offering such models. Disadvantages of K-Car commuter vehicles: The bumpers are made of iron, which provides poor cushioning effect. The battery is located at the rear, making it prone to catching fire in the event of a rear-end collision. The seats cannot be adjusted forward or backward, increasing the risk of rollover at speeds around 40km/h. The vehicle chassis welding is unstable and prone to breakage. Commuter vehicles should be driven according to road conditions: It is advisable to avoid bumpy roads as much as possible. When driving uphill, on bridges, or against the wind with heavy loads, it is essential to slow down. This helps avoid excessive current discharge from the battery, reduces impact damage to the battery, and enhances both its range and lifespan.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.