Is C2 an automatic transmission license?

2 Answers
DelWeston
08/27/25 6:22am
C2 driver's license is for automatic transmission vehicles and is one of the more common licenses. It only permits driving automatic transmission cars with fewer than 9 seats and a length not exceeding 6 meters. The license code is C2. The application age range is 18-70 years. The permitted vehicle type is small automatic transmission cars. Below are detailed introductions to specific car gear positions: 1. P (Park) gear: When the gear shift lever is in the P position, the transmission is in neutral, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used for long-term parking. When engaging P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, first apply the handbrake before engaging P gear. 2. R (Reverse) gear: When the gear lever is in the R position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. 3. N (Neutral) gear: When the gear lever is in the N position, the gears inside the transmission are idling, and the clutch is not engaged. The load on the transmission is minimal at this time. N gear is generally used for short-term parking. Additionally, when towing a car, the transmission should be placed in N gear. 4. D (Drive) gear: When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears based on factors such as vehicle speed and throttle opening, according to the preset shifting pattern. In the vast majority of cases, D gear can be used for driving.
Was this review help?
7
1
Share
DelSawyer
09/09/25 5:16am
I drove a Citroën C2 for several years, mine was a 2007 model equipped with a manual transmission, but I know there are quite a few automatic versions available in the market. Citroën offered both manual and automatic options for the C2, with the automatic transmission mainly being a four-speed model, which was quite convenient for stop-and-go city driving, eliminating the need for frequent gear changes. In terms of fuel consumption, the automatic version was slightly higher, averaging around 8 liters. If you're considering buying a used one, it's best to check the specific model details, as configurations vary by year, and some dealerships only sell manual versions. The C2's overall design is quite practical, with its compact size making it easy to park, but the automatic transmission can develop minor issues if not properly maintained. In conclusion, the C2 does indeed offer an automatic option, so it's a good idea to take a test drive to get a feel for it before making a decision.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What are the common issues with the Punch VT2 transmission?

The common issues with the Punch VT2 transmission are: 1. D-gear starting defect: When starting in D-gear, lightly pressing the accelerator does not move the car, but pressing slightly harder causes the engine to reach 1300 RPM and the car to lurch forward; 2. Jerking below 20 km/h: When decelerating from high speed to below 20 km/h and then pressing the accelerator to accelerate again, the car experiences slight jerking; 3. Low-temperature protection: After a cold start in extremely low environmental temperatures, the car cannot drive normally and requires idling to warm up until the transmission oil reaches a reasonable working temperature. The Punch VT2 transmission uses a relatively conservative friction plate clutch, which can amplify torque and eliminate vibrations within a certain range. The connection between the engine and transmission is soft, with power transmitted via hydraulic oil, resulting in good comfort.
7
4
Share

What are the safety precautions for forklift operations?

Safety precautions for forklift operations include: 1. No person should approach within 1.5 meters of the forklift's working area; 2. When reversing, the operator must first check the surrounding conditions and only proceed after confirming safety; 3. When reversing in workshops, warehouses, or narrow passages, someone should stand beside and behind the operator to provide guidance; 4. No standing or carrying passengers is allowed on any part of the forklift; 5. Overloading is prohibited, and the forks should not be raised too high during loaded travel to avoid affecting the forklift's stability. A forklift refers to various wheeled handling vehicles used for loading/unloading, stacking, and short-distance transportation of palletized goods. Its structural features and working performance are indicated by technical parameters such as rated load capacity, load center distance, and mast tilt angle. Forklifts are typically categorized into internal combustion forklifts, electric forklifts, etc.
1
5
Share

What are the reasons why a new energy vehicle cannot start even though it has electricity?

The reason why a new energy vehicle cannot start even though it has electricity is that there is carbon buildup in the throttle. Cleaning the carbon buildup can resolve the issue. New energy vehicle brands include: BYD Yuan New Energy, Roewe ei6, Roewe e550, BMW i8, BMW i3, etc. Taking the 2019 Yuan New Energy EV360 Zhilian Leading Edition as an example: The manufacturer of this vehicle is BYD, its class is a compact SUV, and its energy type is pure electric. The dimensions of this vehicle are 4360mm in length, 1785mm in width, and 1680mm in height, with a wheelbase of 2535mm. The body type is a 5-door, 5-seat SUV, equipped with a single-speed electric transmission, and features front-wheel drive.
12
2
Share

Where is the license plate with 'Su K' from?

Su K is the license plate code for Yangzhou City. The license plate codes for various cities in Jiangsu Province are as follows: Su A is for Nanjing City, Su B for Wuxi City, Su C for Xuzhou City, Su D for Changzhou City, Su E for Suzhou City, Su F for Nantong City, Su G for Lianyungang City, Su H for Huai'an City, Su J for Yancheng City, Su K for Yangzhou City, Su L for Zhenjiang City, Su M for Taizhou City, and Su N for Suqian City. License plates, commonly known as car tags, are plates attached to the front and rear of a vehicle, usually made of aluminum, sheet metal, plastic, or paper, displaying the vehicle's registration number, registration region, or other relevant information.
15
2
Share

How to set the horn sound when locking the Peugeot 408?

The method to set the horn sound when locking the Peugeot 408 is to select the lock option in the car's onboard computer settings, then click 'lock on' to activate the horn sound function when locking. There are two ways to lock the car: one is to use the lock button on the key to lock the doors, and the other is to lock the doors through sensing. Taking the 2020 Peugeot 408 230THP 10th Anniversary Edition as an example: the manufacturer of this car is Dongfeng Peugeot, it is classified as a compact car, the energy type is gasoline, the transmission is a 6-speed dual-clutch, the body type is a 4-door 5-seater sedan, and the maximum speed is 205 kilometers per hour.
3
1
Share

What Causes Poor Braking in Forklifts?

The reasons for poor braking in forklifts are: 1. Frequent use of brakes leading to excessively high oil temperature in the brake calipers and overheating pistons; 2. Untimely replenishment of brake fluid and air presence in the brake fluid channels. Solutions for poor braking in forklifts: 1. When experiencing poor braking while going uphill, downshift to medium or low gear in time to maintain sufficient power to reach the top of the slope and stop; 2. When poor braking occurs while going downhill and the vehicle's own mechanisms cannot control the speed, the driver should use natural obstacles to create resistance for the vehicle. Forklifts are widely used in construction projects such as highways, railways, buildings, hydropower, ports, and mines for earthwork operations. They are mainly used for loading loose materials like soil, sand, gravel, lime, and coal, and can also perform light digging operations on ores and hard soil.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.