Is BYD a Domestic Car Brand?

Which country does Baojun belong to?

Baojun is a Chinese automobile brand. It was established in 2010 by SAIC-GM-Wuling as an independent automotive brand, with product coverage spanning sedans, MPVs, SUVs, and new energy vehicles. Baojun has successively launched sedan models like the Baojun 630 and Baojun 610; SUV models such as the Baojun 510 and Baojun 530; and MPV models including the Baojun 730 and Baojun 360. The Baojun 730 is equipped with two engine options: a 1.5L naturally aspirated engine and a 1.5L turbocharged engine. It features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. The vehicle's dimensions are 4780mm in length, 1820mm in width, and 1755mm in height, with a wheelbase of 2750mm.

15

5

Share

How to Clean Asphalt from Car Surface?

There are several methods to clean asphalt from car surface: 1. Tar remover: Specialized tar removers can quickly penetrate and dissolve asphalt, effectively removing tar and asphalt stains from the car body and wheel hubs. They provide excellent stain removal, cleaning, and polishing effects. However, they can be somewhat corrosive, so rinse thoroughly with water after cleaning. 2. Essential balm: Essential balm is also a folk remedy that can dissolve asphalt. Apply a few drops of essential balm on the asphalt stains, wait for 5 minutes, then wipe clean with a damp cloth. 3. Using gasoline: Gasoline can remove asphalt from cars, but it is not very friendly to the paint surface. Diesel can also dilute and dissolve asphalt.

11

4

Share

What is the appropriate tire pressure?

There are two scenarios for appropriate car tire pressure: 1. The front tire pressure should be 2.2 to 2.3 bar when unloaded and 2.4 to 2.5 bar when fully loaded. 2. The rear tire pressure should be 2.4 to 2.5 bar when unloaded and 2.6 to 2.8 bar when fully loaded. The recommended tire pressure range may vary depending on the tire model, and the standard tire pressure is usually indicated by the manufacturer at the time of production. Tire pressure can also be affected by temperature changes. In high temperatures or during summer, it is advisable to reduce the tire pressure by 0.1 to 0.2 bar. Conversely, in extremely low temperatures, such as during winter, it is recommended to increase the tire pressure by 0.1 to 0.2 bar.

12

3

Share

What are the steps to replace the cabin air filter?

The cabin air filter is an important component of the air conditioning system. Here are seven steps to replace the filter: 1. First, open the glove compartment cover located behind the front passenger seat. 2. Locate the fixing buckle on the right side of the glove compartment and pull it outward firmly. 3. Remove the fixing buckle of the glove compartment cover to detach it. 4. Squeeze both sides of the glove compartment inward with both hands to take it down. 5. After removing the glove compartment, you will see the cabin air filter cover. Press the fixing buckles on both sides of the cover firmly to remove it. 6. Pull out the old cabin air filter outward. 7. Install the new cabin air filter and reassemble everything in reverse order (pay attention to the installation direction of the cabin air filter).

1

3

Share

What to Do When the Spark Plug Cannot Be Removed?

There are several methods to remove a stuck spark plug: 1. Welding Method: Weld a thin, long iron bolt onto the broken spark plug head, then remove the broken spark plug. This method usually requires multiple welding attempts to succeed and is relatively difficult. 2. Reverse Thread Tool: Since broken spark plugs are a common occurrence, specialized reverse thread tools for removing broken spark plugs are widely available. Here’s how to use a reverse thread tool: (1) Use the reverse thread tool to tap threads inside the broken spark plug head, then twist the tool to remove the broken piece. (2) During the threading process, fine metal shavings may fall into the cylinder. After removing the broken piece, use a magnetic rod to clean them out as much as possible. Spark plugs typically have a lifespan of around 100,000 kilometers, so they don’t need frequent replacement. However, since spark plugs function deep inside the cylinder, they must endure immense pressure and temperature. Experiments show that the pressure during combustion can reach up to 5,000 kPa, and temperatures can soar to 2,000 degrees Celsius. Therefore, even if they don’t need frequent replacement, regular inspections are essential.

14

3

Share

What are the causes of engine shaking and abnormal noise?

Engine is a key component of many machines. There are three main reasons for its shaking and abnormal noise: 1. Root cause: Engine mount damage. The mount bears continuous repeated impacts, making rubber prone to fatigue. The generated high heat will inevitably cause vibration-damping rubber to age over time, weakening its damping effect. Replacement is needed to prevent engine vibration from transmitting into the cabin during operation. 2. Damage to the soft rubber connection between engine and frame. Natural rubber lifespan is 5 years, while mount rubber is designed for 80,000-100,000 km. Both pure rubber and hydraulic mounts face aging/cracking issues requiring inspection and replacement. 3. Other causes: Issues like flywheel, cylinder misfire, or carbon buildup can also cause idle shaking.

7

3

Share

Is BYD a Domestic Car Brand?

Which country does Baojun belong to?

How to Clean Asphalt from Car Surface?

What is the appropriate tire pressure?

What are the steps to replace the cabin air filter?

What to Do When the Spark Plug Cannot Be Removed?

What are the causes of engine shaking and abnormal noise?

Are the Three Major Components of Baojun from GM?

What is the drivetrain of the Bora?

How Long After Passing Subject 1 Can You Take Subject 2 at the Latest?

What engine is used in the Bora Legend?