Is Braking Prohibited in Subject 2?

2 Answers
OEmilio
07/24/25 2:49pm
Subject 2 allows braking. Here are the relevant details: Situations requiring braking: During the Subject 2 test, there are specific instances where braking is necessary, such as when stopping at a designated point on a slope during hill start, during parallel parking, and when stopping during reverse parking. However, except for these specific situations, stopping midway is not permitted in other parts of the test, meaning the speed cannot drop to 0. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test, which includes five mandatory items: reverse parking, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves.
Was this review help?
11
4
Share
OEmilia
08/11/25 8:31am
It is definitely allowed to use the brakes during the Subject 2 driving test, but the key is to apply them appropriately. As someone who has long focused on driving safety, I emphasize that brakes are indispensable for controlling speed and achieving precise parking. For example, when reversing into a parking space, you need to gently tap the brakes to fine-tune your position and avoid crossing the line. During the hill start, pressing the brake can prevent the car from rolling backward. However, if you brake too abruptly, a manual transmission car may stall, and an automatic transmission might jerk. During practice, take time to get a feel for it—combine the clutch and throttle to keep the vehicle steady. Don’t listen to those who say you shouldn’t use the brakes; that’s purely a misunderstanding. The purpose of the test is to assess basic skills, and proper brake usage can earn you points. If you’re still worried, practice simulating the test scenarios repeatedly under your instructor’s guidance. Practice makes perfect—once you get used to it, you’ll realize the brake is a reliable assistant, not a burden.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What causes the ABS light to illuminate in a Volkswagen Santana?

There are multiple states of the ABS light being on, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by mud, sludge, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections between system lines or poor contact in the ABS relay can cause signal issues, leading to system failure. Solution: Check the line connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS light turns off. Another cause is insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off after engine IGFF. Cause: Poor grounding contact in the ABS hydraulic valve body, poor contact in the ABS hydraulic valve body's wiring connector, or ABS computer failure. Solution: Loosen and then retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary. Check if the connector gap has widened, and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant difference between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also cause this issue. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage all the way down. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
17
5
Share

What do the wheel data J and ET mean?

J represents the shape and height of the wheel flange, while the ET value, also known as the ET offset, refers to the offset. The following are detailed explanations: 1. Considerations for J value installation: If the original tire is 195/65/15, the standard tire should be 235/45/17. The flatter the tire, the harder it is to find. During modification, based on the J value, choosing which width of tire depends on what you aim to achieve. Selecting a point within the range affects both handling and ride quality, with the midpoint offering a balance. Narrower tires may impact handling, while wider tires may affect comfort. 2. Considerations for ET value installation: Changing the wheel's offset alters the vehicle's track width, which is the distance between the tire centerlines. Simply increasing the wheel and tire size without changing the offset does not affect the track width. Impact of changing the offset: Using a wheel with a smaller positive offset value widens the track, reducing body roll during cornering and improving the car's cornering speed limit.
20
3
Share

How to Judge the Left and Right Distance When Meeting Vehicles on a Narrow Road?

One look, which means careful observation. Observe the model, speed, and loading condition of the oncoming vehicle; the width and firmness of the road. Two calculate, which means estimating the approximate meeting position by observing the distance and speed of both vehicles, and controlling the speed to choose a suitable position for meeting. Three slow, which means reducing speed. When conditions are unfavorable as the meeting approaches, it is even more important to slow down, avoid blind meeting, and if necessary, stop first to ensure a smooth meeting.
19
4
Share

What is the average fuel consumption of the Corolla?

The average fuel consumption of the Corolla 1.6 automatic transmission is 8.63, with a range of 7.51 to 9.76. Actual fuel consumption may vary depending on individual driving skills and habits, and a fluctuation of ±10% around the average is considered normal. Advantages of the Toyota Corolla: 1. Comprehensive safety features: The U.S. version of the Toyota Corolla comes standard with front and side airbags, as well as the Toyota Safety-Sense driver assistance suite, which includes lane departure alert, a rearview camera, a pre-collision system with pedestrian detection, automatic high beams, dynamic radar cruise control, and LED headlights. 2. Spacious rear seating: The Toyota Corolla is known for its spacious interior, not only in the domestic version but also in the overseas version. The rear seat space measures up to 40 inches, slightly smaller than that of the Camry. 3. Reliable quality and affordable maintenance: Although not a luxury car, the Toyota Corolla is known for its reliability and low-cost maintenance. 4. Excellent fuel efficiency: The Toyota Corolla not only offers a spacious interior but also excels in fuel efficiency. The 2018 overseas version of the Toyota Corolla has been widely recognized for its outstanding fuel economy, which translates to cost savings, along with excellent vehicle reliability.
16
4
Share

Are the practice cars and exam cars different in driving schools?

Exam cars are also normal vehicles, not much different from training cars, except for the driving experience. The shifting feel is different: When practicing in driving school, shifting gears is very easy, requiring only a slight effort to change gears properly, but exam cars are different. Due to infrequent use, the gears in exam cars feel much tighter. When shifting, it often feels like the gear hasn't fully engaged, making shifting somewhat difficult. This causes many people to feel uncertain when shifting gears, and glancing at the gearshift can result in point deductions. The clutch tightness is different: Similar to the gear situation, the clutch in exam cars is also different from training cars. Often, just lightly pressing the clutch will make the car speed up, unlike training cars where you need to press the clutch more firmly. However, for test-takers, the sudden increase in speed can disrupt their driving rhythm, and if they make a mistake, there's no chance to recover. The brake sensitivity is different: Exam car brakes are used less frequently than training car brakes, making them more sensitive. While training cars require pressing the brake pedal all the way down to stop, exam cars only need a light press to brake, which can be helpful for timely stopping during the test. However, some students are used to slamming the brakes, and doing so in an exam car can cause premature braking, especially during hill starts, leading to issues.
20
5
Share

How Many Times Can You Take the Subject 2 Test?

Subject 2 can be scheduled up to five times, with two attempts each time. Below are specific techniques for the driving test Subject 2: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stop while keeping the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting in the car, always adjust the rearview mirrors properly, which is especially crucial for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to locate these points accurately and observe thoroughly to ensure precision. 4. Pay attention to the four corners of the car: The front corner during reverse parking tends to graze the outer boundary line, while the rear corner may graze the side lines of the parking space. The front corner during curve driving and right-angle turns is prone to crossing the line. During parallel parking, the front corner may graze the outer boundary line or the left front corner of the parking space, while the right rear corner may graze the right parking space line. Therefore, always watch the four corners and the outer boundary lines.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.