Is Blue Shell HX7 Plus a Fully Synthetic Lubricant?

When will Beijing's China 5 vehicles no longer be eligible for registration?

After July 1, 2019, Beijing has implemented the China 6 standard, and new China 5 vehicles in Beijing can no longer be registered. The following is an introduction to the implementation of China 6: Official implementation of the China 6 policy: The China 6 motor vehicle pollutant emission standard refers to the standard formulated to implement the Air Pollution Prevention and Control Law of the People's Republic of China, prevent and control the environmental pollution caused by the exhaust of compression ignition and gas fuel ignition engine vehicles, protect the ecological environment, and safeguard human health. Differences between China 5 and China 6: The emission standards are different, with China 6 being more than 30% stricter than China 5. Excluding the influence of working conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbon and non-methane hydrocarbon emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. The principles are different: during the China 5 stage, diesel vehicles and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type used.

9

0

Share

Do Automatic Cars Have a Clutch?

Automatic cars do have a clutch. More details about automatic transmissions are as follows: 1. There is no clutch pedal, but the clutch and accelerator pedals are combined. The clutch in an automatic transmission is replaced by something called a torque converter, which can lock one end while the engine outputs torque, converting kinetic energy into internal energy. 2. Even though automatic transmissions don't have a clutch pedal, they still have a clutch, which is located inside the automatic transmission. As the car's RPM, throttle, brake, and speed change, the onboard computer controls the separation or engagement of the clutch plates to achieve the effect of automatic shifting. 3. As the name suggests, an automatic transmission does not require the driver to shift gears manually. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The clutch is located in the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch is the input shaft of the transmission. During gear shifts, it connects and disconnects the power between the engine and the transmission to ensure smooth shifting.

3

1

Share

What Are the Blind Spots When Driving a Car?

The blind spot of a car is located in the area from 45 to 60 degrees outward starting from the car door. More details are as follows: Left and Right A-Pillar Blind Spots: Some cars have particularly wide A-pillars, which severely obstruct the view. However, some cars have a small triangular window added to the A-pillar, effectively increasing visibility. The A-pillar blind spot is the most dangerous and the one that troubles drivers the most. This blind spot is particularly hazardous when starting off or making turns. Rearview Mirror Blind Spot: This blind spot has a wide range of hazards, affecting lane changes, turns, and reversing. The blind spot is roughly in the area from 45 to 60 degrees outward starting from the front door. Upon closer observation, when the front of the adjacent lane's car is near the rear wheel of your car, it cannot be seen in the rearview mirror. Therefore, when changing lanes, check the rearview mirror multiple times or glance out the window after checking the mirror to effectively address the rearview mirror blind spot while driving. Blind Spot Directly Behind the Vehicle: Due to the height of the vehicle and issues with the rear windshield and trunk, low areas directly behind the vehicle are not visible. However, this blind spot poses relatively minor hazards. Accidents are more likely to occur when reversing, so it's advisable to reverse slowly.

5

Share

How to Read the Gauge on an Air Conditioning Refrigerant Pressure Meter?

Depending on the ambient temperature, the low pressure during normal operation of the refrigeration system generally ranges between 3 to 6 bar, while the high pressure ranges between 10 to 25 bar. Below is an introduction to the air conditioning refrigerant pressure meter: Why Add Freon to Air Conditioners: Freon serves as the medium for heat transfer in the air conditioning refrigeration system. Without it, heat cannot be effectively exchanged, and the air conditioner cannot cool or heat. Therefore, if the air conditioner lacks Freon, symptoms may include poor cooling (or heating), failure to cool (or heat), protective shutdown, water leakage from the indoor unit (sometimes spraying water), and ice formation on the indoor evaporator. There are also less visible issues—reduced lifespan of the air conditioner, wasted electricity, and damage to the air conditioner's compressor. Hence, sufficient Freon is essential for normal air conditioner operation. How Much Freon Should Be Added to an Air Conditioner: During hot summer weather (when the ambient temperature is above 32°C), the pressure gauge needle should stabilize at 0.45 MPa. In spring and autumn, it should be around 0.3 MPa. In winter, adding Freon does not strictly follow the pressure gauge reading (the reference pressure is 1.8 MPa). Instead, it relies on the technician's experience or observing the swing amplitude of the pressure gauge needle.

12

0

Share

How to Classify Engine Oil Grades?

Engine oil grades are typically classified by two methods: viscosity classification and oil quality classification. I. SAE Viscosity Classification: 1. High-temperature type for summer: 20, 30, 40, 50. The larger the number, the higher the viscosity, indicating suitability for higher maximum temperatures. 2. Low-temperature type for winter: 0W, 5W, 10W, 15W, 20W, 25W. The letter W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity and better low-temperature fluidity, indicating suitability for lower minimum temperatures. 3. All-season type for both winter and summer: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, etc. The smaller the number before W, the lower the minimum temperature the oil can withstand, and the larger the number after the hyphen, the higher the maximum temperature the oil can withstand. II. API Engine Oil Quality Classification: 1. Oils starting with S: SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN. These oils start with S, and the letters range from A to N. Each subsequent letter represents a higher grade than the previous one. For example, SN is a higher grade than SM. 2. Oils starting with C: CA, CB, CC, CD, CE, CF. These are general-purpose diesel engine oils, and their letter grades are similar to S-grade oils. The later the letter in the alphabet, the higher the oil grade.

8

3

Share

What engines were used in the older Buick Regal models?

Buick Regal utilized a total of three engines, which are: 1. A 2.0-liter naturally aspirated engine. 2. A 2.0-liter turbocharged engine. 3. A 1.6-liter turbocharged engine. Below are the relevant details: 1. The Regal is a mid-size sedan under the Buick brand, with a focus on handling and power. 2. The 2.0-liter naturally aspirated engine in the Regal delivers 154 horsepower and a maximum torque of 190 Nm. This engine reaches its peak torque at 4,600 rpm and its maximum power at 6,200 rpm. It is paired with a 6-speed automatic transmission (6AT). The 1.6-liter turbocharged engine produces 184 horsepower and a maximum torque of 235 Nm, with its peak power at 5,800 rpm and maximum torque available between 2,200 to 5,600 rpm. This engine is also matched with a 6AT. The 2.0-liter turbocharged engine is used in the Regal GS, delivering 254 horsepower and a maximum torque of 350 Nm. 3. This engine achieves its peak torque at 2,000 rpm and maintains it up to 5,000 rpm. It is paired with a 6AT. The older Regal models feature a MacPherson strut front suspension and a multi-link independent rear suspension. The multi-link independent suspension enhances the contact area between the wheels and the ground, thereby improving traction and, consequently, the vehicle's handling performance.

17

1

Share

Is Blue Shell HX7 Plus a Fully Synthetic Lubricant?

When will Beijing's China 5 vehicles no longer be eligible for registration?

Do Automatic Cars Have a Clutch?

What Are the Blind Spots When Driving a Car?

How to Read the Gauge on an Air Conditioning Refrigerant Pressure Meter?

How to Classify Engine Oil Grades?

What engines were used in the older Buick Regal models?

How to Determine if a Thermostat is Functioning Properly?

What is the comprehensive fuel consumption of the Passat?

What are the consequences of exceeding the vehicle annual inspection deadline?

How to Inquire About the Vehicle Owner's Phone Number?