Is Bestune a Joint Venture or Domestic Car?

How to Deal with Overheating Car Engine Temperature?

Methods to handle overheating car engine temperature are as follows: 1. If overheating occurs at low speed, stop and turn off the engine as soon as possible: When you notice the car's temperature entering the warning line while driving at low speed, this usually indicates a problem with the cooling system. It is recommended to immediately find a safe place to stop without obstructing traffic, then turn off the engine. 2. If overheating occurs at high speed, stop and let the engine idle: If you detect the car's temperature entering the warning line while driving at high speed, do not turn off the engine immediately after pulling over. Instead, allow the engine to idle for a while. 3. Investigate the cause of the car's temperature warning: Check if the coolant level in the reservoir is too low, inspect the hoses and radiator for leaks, verify if the radiator fan is functioning properly, determine if the thermostat has any issues, and ensure the radiator is clean and not clogged.

3

Share

What is the Difference Between Four-Wheel Drive and Rear-Wheel Drive?

The difference between four-wheel drive and rear-wheel drive lies in the number of driven wheels and handling characteristics. Four-wheel drive vehicles have four driven wheels, while rear-wheel drive vehicles only have two. Four-wheel drive vehicles offer stronger mechanical grip, but rear-wheel drive vehicles provide more driving enjoyment. Below is more information about four-wheel drive systems: 1. There are three common types of four-wheel drive systems in cars: on-demand four-wheel drive, full-time four-wheel drive, and part-time four-wheel drive. 2. Full-time four-wheel drive systems are often found in luxury SUVs and high-performance sedans. Vehicles equipped with full-time four-wheel drive systems have power delivered to all four wheels at all times. This type of four-wheel drive system enhances the mechanical grip of the wheels. 3. Part-time four-wheel drive systems are commonly seen in rugged off-road vehicles. 4. Vehicles equipped with part-time four-wheel drive systems typically have three modes: high-range four-wheel drive, low-range four-wheel drive, and high-range two-wheel drive.

6

1

Share

Can You Cool Overheated Brake Pads with Cold Water?

You should not cool overheated brake pads with cold water. Here are some precautions for brake pad usage: 1. Service Life: Under normal driving conditions, the front brake pads of most vehicles last between 30,000 to 50,000 kilometers, while rear brake pads typically last 120,000 to 150,000 kilometers. The replacement timing should be determined based on actual wear conditions. The manufacturer's recommended mileage may vary depending on the vehicle model. 2. Replacement: When replacing brake pads, always choose products from reputable manufacturers. Genuine manufacturer-produced brake pads usually feature clear packaging printing, including license numbers, specified friction coefficients, and execution standards. The packaging box should contain certificates of compliance, production batch numbers, and manufacturing dates. 3. Inspection: When inspecting brake pads, it's essential to also examine the wear on brake discs or drums to ensure sufficient contact area with the pads for optimal braking performance.

3

1

Share

Does Tesla Have External Discharge Capability?

Tesla does not have external discharge capability. Currently, none of Tesla's electric vehicle models support bidirectional charging and discharging functionality. According to overseas media reports, the hardware of the Model 3 already supports bidirectional functionality, and it only requires activation by the manufacturer to be used immediately. Moreover, compared to other automakers, the Model 3 does not need an additional inverter to feed power back into the AC grid. Below are the benefits of external discharge: More Flexible Use of Electrical Energy Bidirectional charging and discharging for electric vehicles is increasingly being emphasized or enabled by various alliances and brands. The greatest benefits are seen in commercial fleets or commercial applications. For individual users, the most significant advantage of bidirectional charging and discharging lies in its application for home renewable energy networks. Enables Vehicle-to-Vehicle Charging Another benefit of bidirectional charging and discharging is the ability to charge one electric vehicle from another. If a Model 3 (which supports bidirectional functionality) runs out of power or has insufficient charge to move, it can use charging cables to transfer power directly to another Model 3 (it is unclear whether this works with other models). This enables vehicle rescue and range-sharing benefits.

17

5

Share

How often should the Aisin 6AT transmission fluid be changed?

Aisin 6AT transmission fluid should generally be changed every 3 years or 60,000 kilometers. Transmission fluid can deteriorate and volatilize when working under high-speed and high-temperature conditions for extended periods, so regular replacement is necessary. Failure to change the fluid can accelerate the wear of mechanical components. Potential risks of not changing transmission fluid for a long time: 1. Deterioration and volatilization under high-speed and high-temperature conditions: Prolonged operation under high-speed and high-temperature conditions can cause the transmission fluid to deteriorate and volatilize, accelerating the wear of mechanical parts and, in severe cases, damaging internal transmission components. 2. Weak acceleration when the car is cold: If the transmission fluid is not changed for a long time, the vehicle may experience weak acceleration when starting cold. 3. Thickening of transmission fluid, leading to blocked transmission cooler: This can cause the transmission cooler to become obstructed, resulting in excessively high transmission fluid temperatures and increased wear. 4. Slight slipping during driving: Failing to change the transmission fluid on time may cause slight slipping or similar issues while driving.

6

5

Share

What are the reasons for an automatic transmission car not moving when starting?

Automatic transmission car not moving when starting reasons are as follows: 1. Car does not move when in gear: The car does not move when in gear, which is a comprehensive functional failure involving the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first, and the condition of the two wheels can be checked first. The order of diagnosis is generally from the drive wheels forward through the rear axle to the drive shaft and then to the transmission, and finally to the clutch. If the drive shaft rotates but the car does not move forward, the fault is in the rear axle. 2. Car does not move when starting in a certain gear, drive shaft does not rotate: If the car does not move when starting in a certain gear and the drive shaft does not rotate, it indicates that the fault is in the transmission. Remove the transmission cover and check whether the transmission shift fork is broken or whether the guide block fixing screws are loose. If the above checks are normal, perform a gear engagement test. If the second shaft does not rotate in a certain gear, it means the half-round key of that gear is cut off.

11

3

Share

Is Bestune a Joint Venture or Domestic Car?

How to Deal with Overheating Car Engine Temperature?

What is the Difference Between Four-Wheel Drive and Rear-Wheel Drive?

Can You Cool Overheated Brake Pads with Cold Water?

Does Tesla Have External Discharge Capability?

How often should the Aisin 6AT transmission fluid be changed?

What are the reasons for an automatic transmission car not moving when starting?

Does the 2021 Tharu have a particulate filter?

Can You Still Drive with an Engine Oil Leak?

Where to adjust the headlight height of CT5?

Will the Envision automatically lock the doors when the driver leaves?