Is Baojun a Joint Venture Brand or an Independent Brand?

What does it mean to sweep the line in reverse parking?

Body sweeping the line means the vehicle body crosses the line, which results in a deduction of 100 points, making the test unsuccessful. Other actions that also result in a 100-point deduction include the vehicle body crossing the line, not entering the parking space, stopping midway, not following the prescribed route or sequence, and exceeding the specified time. The total score for both subjects is 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The rules for the Subject 2 test of the motor vehicle driver's license application state that any of the following will result in failure: stopping or rolling back midway during the test, not following the voice prompts, or the wheels or vehicle body crossing the line. Many learners encounter the issue of crossing the line during Subject 2 training, and the most common mistake leading to failure is "crossing the line." The main reason for crossing the line is the learner's failure to master the correct timing for steering. Besides missing the right moment to steer, another reason could be the steering speed not keeping up with the vehicle speed. Subject 2 Deduction Standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using the turn signal (including when starting, changing lanes, overtaking, turning, or parking); turning on the turn signal for less than three seconds (note this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Not completing the parking: 100-point deduction. Before reversing, if the two front wheels' contact points do not exceed the control line: 100-point deduction. Exceeding the 210-second time limit for the task: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction each time. Slope Fixed-Point Parking and Starting: After the vehicle stops, if the front bumper is not aligned with the pole line and exceeds 50 cm forward or backward: 100-point deduction. After the vehicle stops, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: 10-point deduction. After the vehicle stops, if the starting time exceeds 30 seconds: 100-point deduction. Wheels crossing the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After the vehicle stops, if the vehicle body is more than 50 cm from the road edge line: 100-point deduction. After parking, if the parking brake is not tightened: 10-point deduction per occurrence. After the vehicle stops, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel Parking: After the vehicle enters the parking space and stops, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using the turn signal when parking: 10-point deduction. Exceeding the 90-second time limit for the task: 100-point deduction. Vehicle body touching the parking space boundary line while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Right-Angle Turn: Wheels crossing the road edge line: 100-point deduction. Not using or incorrectly using the turn signal during the turn, or not turning off the turn signal after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve Driving: Wheels crossing the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Driving without the gear in second or higher: 5-point deduction.

20

3

Share

How to Check the Engine Oil in Your Car?

Method for checking engine oil: Locate the dipstick handle in the engine compartment and prepare a tissue. Then pull out the dipstick and use the tissue to completely wipe off the oil stuck to the dipstick head. Reinsert the cleaned dipstick all the way back in, then pull it out again. This time, the oil adhering to the end of the dipstick can be used for observation. Here is some related information about engine oil: 1. Oil Classification: There are 4 types of summer oils, 6 types of winter oils, and 16 types of all-season oils. The grades for summer oils are: 20, 30, 40, 50, 60. The larger the number, the higher the viscosity and the higher the maximum applicable temperature. 2. Winter Oil Grades: 0W, 5W, 10W, 15W, 20W, 25W. The symbol 'W' stands for Winter. The smaller the number before 'W', the lower the low-temperature viscosity and the better the low-temperature fluidity, meaning it is suitable for lower minimum temperatures.

9

0

Share

Can the Subject 3 Test Appointment Be Cancelled After Successful Booking?

Subject 3 test appointment can be cancelled after successful booking. Below is relevant information about the driver's license examination: 1. Driver's license examination procedure: registration, traffic regulations study, Subject 1 test, Subject 2 test, Subject 3 test, Subject 4 test. 2. Test content: The examination subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). Specific contents include reversing into a garage, narrow road U-turns, parallel parking, hill start and stop, right-angle turns, curve driving, emergency braking, tunnels, toll booth card collection, straight-line driving, lane changing, passing intersections, and pulling over.

11

3

Share

What to Do When Your Car Battery Dies and the Engine Won't Start?

Here are some methods to start a car with a dead battery: 1. Push-starting; This method only works for manual transmission cars, and it's best if the battery still has some charge left. The terrain must also be suitable, otherwise it might be difficult to implement, especially on an uphill slope. First, shift into first gear, press the clutch, turn the key to the ACC position, and have someone push the car from behind. Once the car gains enough speed, release the clutch, and the car will start due to inertia. 2. Jump-starting; If you don't have an emergency jump starter—something few car owners carry—you can ask a nearby driver for help to jump-start your car. 3. Towing; Find another car to tow yours. First, secure a sturdy tow rope and firmly tie the two cars together at the front and rear. Then, you can begin towing. Start slowly to ensure both cars move at the same speed, and always pay attention to road safety. If another vehicle approaches from behind, promptly notify the towing car and slowly pull over to the roadside.

3

2

Share

What does 'Jiche' mean?

Jiche refers to motorcycles, commonly known as 'Jiche' in regions like Hong Kong, Taiwan, and Guangdong. The introduction to motorcycles is as follows: Meaning of motorcycles: Motorcycles are two-wheeled or three-wheeled vehicles powered by gasoline engines, steered by handlebars for front-wheel direction. They are lightweight, agile, and fast, widely used for patrol, passenger and cargo transport, and also as sports equipment. Classification of motorcycles: Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Structure of motorcycles: They are internal combustion engine vehicles with two or three wheels in a row, equipped with one or two saddle-shaped seats for riders.

9

5

Share

What do the terms 'total mass' and 'kerb weight' of a vehicle mean?

Kerb weight refers to the weight of the vehicle, while total mass is the approved carrying capacity of passengers and cargo, which can also be understood as the fully loaded weight of the vehicle. Kerb weight: The kerb weight of a vehicle is the weight of the empty car, including all factory-equipped technical components, full additives, and lubricants. It is an important design indicator for automobiles. Total mass: The total mass of a vehicle represents the sum of the kerb weight plus the weight of the driver, passengers, and luggage, collectively referred to as the vehicle's total mass.

7

1

Share

Is Baojun a Joint Venture Brand or an Independent Brand?

What does it mean to sweep the line in reverse parking?

How to Check the Engine Oil in Your Car?

Can the Subject 3 Test Appointment Be Cancelled After Successful Booking?

What to Do When Your Car Battery Dies and the Engine Won't Start?

What does 'Jiche' mean?

What do the terms 'total mass' and 'kerb weight' of a vehicle mean?

What are the methods for adjusting car high beam headlights?

What are the precautions to prevent car scratches?

Is It Safe to Buy a Vehicle Registered Under Someone Else's Name?

How Many Points Are Deducted for Touching the Line in Reverse Parking?