Is Baojun a Domestic or Joint Venture Brand?

1 Answers
BriellaMarie
07/28/25 6:42pm
Baojun is a joint venture brand, with models including: Baojun 310, Baojun 710, Baojun 530, Baojun 510, Baojun 360, etc. Taking the 2021 Commemorative Edition Baojun 530 as an example, its body dimensions are: 4690mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm, a fuel tank capacity of 52 liters, a minimum ground clearance of 190mm, and a curb weight of 1465kg. The 2021 Commemorative Edition Baojun 530 is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 147PS, a maximum power of 108kW, and a maximum torque of 250Nm, paired with a 6-speed manual transmission.
Was this review help?
16
0
Share
More Forum Discussions

How to Repair a Leaking Car Radiator?

Check if the radiator cap is tightened; if not, tighten the car radiator cap. Inspect the radiator hoses for any damage. If found, temporarily wrap the cracked area tightly with tape and promptly visit a repair shop to replace the hose. Examine the radiator for any cracks. Use a method of pressurizing the radiator with air to observe where water seeps out under pressure, then proceed with repairs.
16
2
Share

How to Reset the Wrench Light on the Mazda3 Axela?

The method to reset the wrench light on the Mazda3 Axela is as follows: 1. First, press the one-touch start button of the Mazda3 Axela. 2. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. 3. At this point, the central LCD screen will display the vehicle maintenance information. 4. Finally, press the OFF button at the lower right of the steering wheel, and the wrench light will be reset. This will clear the wrench indicator light. More details are as follows: 1. The wrench-shaped light is called the maintenance reminder light, alerting the owner that maintenance is due. The vehicle is preset to remind the owner to change the oil and perform maintenance after reaching a certain mileage. After changing the oil, the reminder needs to be reset. Typically, mechanics at service centers will assist in resetting it to prepare for the next maintenance count. If not reset, the mileage of your maintenance will not be recorded. 2. The first maintenance interval for the Mazda3 Axela is 5,000 kilometers, with the first service being free. The main maintenance items include oil change, oil filter replacement, and routine inspections. It is important to note that the first service requires bringing the vehicle's registration certificate or certificate of conformity, as well as the quality warranty manual.
4
2
Share

How to Install a Motorcycle License Plate?

License plates should be installed on the plate holder with the front side facing outward and the characters in the correct orientation. Reverse or upside-down installation is prohibited. After receiving the license plate, there will be two packages of professional mounting screws. Insert the screws into the holes by rotating them as you push them in. First, align the license plate by hand, ensuring equal spacing on both sides so that all four screw holes on the plate match the four holes on the bumper. Use a screwdriver to rotate and remove the screws if necessary. Tighten the screws with a screwdriver. Once tightened, gently press the anti-theft caps into place. Note that these caps are one-time use and cannot be removed once installed.
16
5
Share

How to Handle 24 Points Deducted from Driver's License?

The driver's license will be temporarily confiscated by the traffic police, and you must complete full-score education at the traffic management department that confiscated it within 15 days. If not completed, the license will be announced as suspended. You need to first attend a seven-day study on road traffic safety laws and regulations, followed by the subject one exam. Within 10 days after completing subject one, you must take the road driving skills test, which is the subject three exam. Only after all exams are completed and passed will the deducted points be cleared and the driver's license returned.
7
0
Share

How Many Kilometers Does a Tesla Need to Drive to Activate AP?

500 kilometers are required to activate. Tesla AP is the automatic assisted driving function of Tesla vehicles. Here is a detailed introduction about Tesla vehicles: Overview: Tesla vehicles generally refer to Tesla. Tesla is an American electric vehicle and energy company that manufactures and sells electric vehicles, solar panels, and energy storage equipment. Its headquarters is located in Palo Alto. Others: Tesla's first car product was the Roadster, released in 2008, a two-door sports car. The second car product was the Model S, released in 2012, a four-door all-electric luxury sports sedan. The third car product was the Model X, a luxury all-electric SUV.
11
4
Share

What Causes Uneven Wear on the Left Front Wheel?

Uneven wear on the left front wheel can be caused by issues with wheel alignment, tire ply rating, or tire pressure. Wheel Alignment Issues: After prolonged use of the vehicle, if the driver notices symptoms such as heavy steering, shaking, pulling to one side, misalignment, or failure of the steering wheel to return to center, as well as abnormal tire wear patterns like one-sided wear, scalloped wear, block wear, or uneven wear, or if the vehicle feels floaty, bumpy, or unstable while driving, it's advisable to check the wheel alignment values to see if they deviate significantly and perform repairs promptly. (Typically, a four-wheel alignment check includes four parameters for the front wheels: toe, camber, kingpin inclination, and caster.) Tire Ply Rating Issues: Check whether the purchased tires are of the same model. Tires of the same model may have different ply ratings, such as load-range tires available in 16-ply and 18-ply. If the ply ratings don't match, tires with higher ply ratings may experience accelerated wear. Tire Pressure Issues: This issue is more common with load-bearing tires. When tires are used side by side, if one tire is overinflated, it can lead to crown wear, characterized by higher tread patterns on both sides of the tire and accelerated wear in the middle of the tire crown. Second, insufficient tire pressure can cause the tire to form an arch shape, reducing contact with the ground and accelerating wear on the outer edges of the tire crown. Third, uneven tire pressure between left and right tires can cause the tire with lower pressure to wear more on one side.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.