Is Aston Martin Considered a Supercar?

Who to Contact for the Vehicle Registration Certificate After Paying Off the Car Loan?

After paying off the car loan, you need to go to the vehicle management office to complete the vehicle mortgage release registration and obtain the motor vehicle registration certificate. Here is some additional information: Car Loan: A car loan refers to the loan issued by the lender to the borrower applying to purchase a car. The actual interest rate of the car loan is determined by the handling bank based on the customer's actual situation, with reference to the loan benchmark interest rate stipulated by the central bank. There are three main types of car loans: direct customer loans, indirect customer loans, and credit card car loans. The loan term is generally 1-3 years, with a maximum of 5 years. Early Repayment: According to bank regulations, customers who wish to repay the loan early need to submit a written application one week to one month in advance and agree on a repayment date. Then, on the agreed date, bring your ID card and the loan contract signed with the bank to the bank to fill out the loan repayment application form and the early repayment agreement. Deposit the required repayment amount into the account for deducting loan principal and interest as required by the bank, and the bank will automatically deduct it.

10

4

Share

What is the purpose of road calibration function?

Road calibration function mainly serves to inform and alert people. Below is a relevant introduction about the road calibration function: Location setting: Road traffic signs are usually set on the right side of the road, where drivers can easily see them. For lanes such as overtaking lanes, driving lanes, and emergency parking belts, road traffic signs are typically set above the road through gantries. Near the end of highways, some prohibition or warning signs are also placed within the central divider. The setting of road traffic signs for interchanges, service areas, etc., follows the principle that approaching traffic will not obstruct the driver's line of sight at intersections or points of divergence and convergence. Precautions: The placement of road traffic signs must ensure that drivers have sufficient reaction time to make necessary judgments for safe operation. Roadside traffic signs must maintain a clear distance of 250mm from the outer edge of the shoulder, and the lower edge of the signboard must have a clearance of 2000mm from the outer edge of the emergency parking belt. When setting signs above the road, ensure that the lower edge of the signboard maintains a clearance of more than 5000mm from the road surface. Road traffic signboards are generally set at a right angle to the road, with a slight inward tilt, and the front of the board faces the direction of travel for easy observation by drivers.

20

0

Share

How to Use Car Lights Correctly?

When heavy rain pours down, drivers' visibility can easily become blurred, making it difficult to judge the surrounding conditions. At this point, you can consider turning on the fog lights to alert other drivers to your presence. In foggy weather, it goes without saying that fog lights must be turned on—both to avoid hitting others and to prevent being hit yourself. However, it's important to note that because fog lights are brighter than regular headlights and have strong scattering effects, turning them on unnecessarily can interfere with other drivers' visibility, especially for oncoming traffic. In severe cases, this could lead to accidents. After turning on the parking lights, you can then activate the fog lights. Among them, the front fog lights can be turned on independently, while the rear fog lights can only be turned on simultaneously with the front fog lights and cannot be operated alone. There are two main styles of fog light switches: button-type and knob-type. Different car manufacturers have their own preferred methods for activating fog lights. This type of fog light switch is commonly found in American brands like General Motors and Ford. Its characteristic is ease of operation—simply press the button to achieve the desired function. This type of fog light switch itself comes in two variants: one is integrated into the left stalk (turn signal stalk), commonly seen in domestic and Japanese brand models; the other is a standalone knob located on the left side of the dashboard, with Volkswagen models being a typical example of this style. Turn signals are warning lights used by motor vehicles to alert surrounding vehicles and pedestrians when turning. When activated, the lights flash repeatedly to draw attention and prevent accidents. Drivers must develop the habit of using turn signals when on the road and avoid driving blindly. This indicator light displays the position of the vehicle's turn signals. It is usually off. When the driver activates the turn signal, the corresponding indicator light will illuminate simultaneously and turn off automatically once the turn signal is deactivated. The turn signal switch is typically installed on the left side of the steering wheel, and its operation can be summarized as "up for right, down for left." Pushing the switch upward (clockwise) signals a right turn, while pushing it downward (counterclockwise) signals a left turn. However, with advancements in automotive technology, many cars now feature a "one-touch three-flash" quick-turn function on the hazard light switch. By lightly tapping the stalk, the turn signal will flash three times and then turn off automatically. This eliminates the hassle of manually turning off the turn signal when changing lanes or overtaking. Unlike conventional turn signal switches, Ferrari's turn signal switch is uniquely mounted on the steering wheel. Turn Signal Usage Notes: 1. Turn off hazard lights before using turn signals (if no turn signal priority function exists). Many models lack a turn signal priority function, so if you need to use the turn signal while the hazard lights are on, you should first turn off the hazard lights before activating the turn signal. 2. Quickly identify if the turn signal is malfunctioning. Turn signals come with either contact-type or contactless flashers. For contact-type turn signals, if there is a fault, the corresponding indicator on the dashboard will stop flashing. For contactless turn signals, the dashboard indicator will flash at a faster frequency if a fault occurs.

1

Share

What is the standard thickness of brake pads?

The standard thickness of brake pads is generally around 1.5cm, and it will gradually decrease due to friction during braking operations. The critical thickness for brake pads is typically around 2 to 3 millimeters. If the brake pad thickness is less than 3 millimeters, it must be replaced. The thickness of brake pads can often be visually inspected, as some brake pads are visible through the gaps in the wheel hub. If the brake pads have worn down to one-third of their standard thickness, replacement is recommended. However, due to the wheel hub design in some car models, it can be difficult to check the brake pad thickness without removing the tires, which can be quite troublesome. Some car models are equipped with an indicator light on the dashboard (usually near the handbrake light) that alerts the driver when the brake pads are too thin. There are also specialized tools available for measuring brake pad thickness, which can provide a more accurate assessment. Additionally, drivers can rely on their senses to judge; if the brake feels hard, it may indicate that the brake pads are too thin and lack sufficient friction, requiring immediate replacement to avoid accidents. The replacement cycle for brake pads depends on the vehicle's operating environment and driving habits. Generally, replacement should be considered after driving approximately 40,000 kilometers. If visual inspection reveals that the brake pads have thinned or braking becomes difficult, timely replacement is advised, preferably at a professional repair shop for inspection and replacement.

3

5

Share

Under what circumstances can you turn right at a traffic light?

There are three situations where vehicles can turn right at a red light, as detailed below: Circular traffic lights: If the circular traffic light at an intersection turns red, vehicles in the right-turn lane can proceed to turn right directly. However, you must be careful not to interfere with other vehicles, as well as pedestrians and vehicles on the rear and right-side roads. Arrow-shaped right-turn indicator: If you encounter an arrow-shaped right-turn signal at a crossroad, you cannot turn right when the red arrow is lit. If you proceed to turn right, you will be considered to have run a red light. Additional sign on a circular red light: At some intersections with complex road conditions, you may sometimes see a reminder above the traffic light indicating whether right turns are allowed during a red light. If the sign says "Right Turn on Red," then you can turn right. If it says "No Right Turn on Red," you must wait for the green light before turning; otherwise, it will be considered running a red light. Laws and regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicle signal lights and non-motor vehicle signal lights indicate the following: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle signal lights or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the instructions of the motor vehicle signal lights. When the red light is on, right-turning vehicles may proceed, provided they do not obstruct the passage of other vehicles or pedestrians. According to the "Road Traffic Safety Law," the regulations regarding traffic lights are as follows: Article 25, Paragraph 2 states that traffic signals include traffic lights, traffic signs, traffic markings, and the directions of traffic police officers. Article 26 states that traffic lights consist of red, green, and yellow lights. A red light indicates prohibition, a green light indicates permission, and a yellow light serves as a warning. Article 38 states that vehicles and pedestrians must follow traffic signals. If a traffic police officer is present and directing traffic, they must follow the officer's instructions. On roads without traffic signals, they should proceed under the principles of safety and smooth traffic flow. Article 62 states that pedestrians crossing intersections or roads should use crosswalks or pedestrian facilities. At crosswalks with traffic signals, they must follow the signals. At intersections without traffic signals or crosswalks, or when crossing roads without pedestrian facilities, they should proceed only after confirming safety. Article 89 states that pedestrians, passengers, or non-motor vehicle drivers who violate road traffic safety laws or regulations regarding road passage will be given a warning or fined between 5 and 50 yuan. Non-motor vehicle drivers who refuse to pay the fine may have their vehicles impounded. Driving a motor vehicle in violation of traffic signals will result in a 6-point penalty. Right-turn precautions: Observe straight-moving vehicles on the left: When turning right, you must check both the right and left sides for oncoming traffic. Watch for left-turning vehicles from the opposite direction: In addition to observing straight-moving vehicles, you should also check for left-turning vehicles from the opposite direction. When turning right, always yield to vehicles on the left, whether they are turning left or going straight. Watch for pedestrians: When turning right, besides checking for crosswalks at the intersection, you should also look for crosswalks at the corner. Be sure to observe whether there are pedestrians on the crosswalk.

10

4

Share

What does the eco indicator light mean?

When the eco indicator light on the car is illuminated, it indicates that the vehicle's economy mode has been activated. ECO stands for the car's economy driving mode, also known as the economy mode. When driving frequently in congested urban traffic conditions, activating the eco mode can significantly improve fuel efficiency. Under eco mode operation, the carbon deposits in the engine are roughly similar to those produced under normal operating conditions. The main principle of eco mode is not complicated. It primarily involves making comprehensive judgments and analyses of factors that affect fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the appropriate amount of fuel to supply to the engine for operation, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with reasonable gear selection to minimize unnecessary fuel consumption. ECO is an abbreviation, with the Chinese translation representing Ecology (environmental protection), Conservation (energy saving), and Optimization (power). Eco mode is further divided into active eco driving mode and passive eco driving mode. When the dashboard eco indicator light is on, it means the vehicle's economy mode is active. Eco mode is categorized into active and passive types. The difference lies in the fact that active mode has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. Passive eco mode does not have a dedicated button. When the dashboard eco indicator light is on, it serves only as a reminder function. The eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars use the active eco driving mode, meaning they have a dedicated switch button. Therefore, you can activate eco mode during daily driving. However, it is unnecessary to activate eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of eco mode but also affect vehicle performance. Additionally, eco mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, and eco mode automatically deactivates. During idle parking or in N/P gear and manual mode, eco mode may also deactivate. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and eco mode will not function.

3

2

Share

Is Aston Martin Considered a Supercar?

Who to Contact for the Vehicle Registration Certificate After Paying Off the Car Loan?

What is the purpose of road calibration function?

How to Use Car Lights Correctly?

What is the standard thickness of brake pads?

Under what circumstances can you turn right at a traffic light?

What does the eco indicator light mean?

Steps for Starting and Parking an Automatic Transmission Car

How to Handle the Transfer Registration of a Motor Vehicle?

Can the driver's license and vehicle license be kept together?

What is the speed rating code for car tires?