Is an insurance policy required for vehicle inspection?

1 Answers
SanKayden
07/29/25 11:33am
Currently, an insurance policy is required for vehicle inspection. Below are the precautions for annual inspection: Documents to bring: driving license, compulsory motor vehicle traffic accident liability insurance policy (copy), triangular warning sign, fire extinguisher. Document explanation: The compulsory motor vehicle traffic accident liability insurance policy is divided into two pages, the original and the copy. If it is an installment payment and there is no original insurance policy, you need to bring a copy of the insurance policy (stamped by the insurance company), insurance card, and explain the reason; the copy of the insurance policy needs to be submitted during the vehicle inspection, and the copy will be taken back by the annual inspection agency. Bring identity proof and a copy: whoever drives the car to the inspection should bring their ID card, note that both the original and the copy are required, the ID card copy should be neatly cut along the edge, and for company vehicles, the agent's identity proof is required.
Was this review help?
15
3
Share
More Forum Discussions

What causes the Kia K3 steering wheel to wobble left and right with abnormal noise?

The reasons for abnormal noise when the steering wheel wobbles left and right are as follows: Noise from the steering column dust cover: If the abnormal noise comes from below the steering wheel, it may be caused by the steering column dust cover. Due to insufficient lubrication of the dust cover, friction noise occurs. Solution: Apply some grease inside the dust cover. Abnormal noise from inside the steering wheel: This is usually caused by the clock spring (spiral cable) inside the steering wheel. Note: When removing the steering wheel, disconnect the airbag fuse to prevent the airbag from deploying. Solution: Remove the steering wheel and apply grease to the clock spring. Noise from the stabilizer bar: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Solution: If the stabilizer bar bushings are loose, shims can be added.
11
4
Share

What are the functions of the buttons on the Subaru Forester?

Subaru Forester has a variety of buttons, such as: X-MODE, OFF button The following section introduces the functions of these buttons: X-MODE: It is a one-click optimization mode that can enhance the driver's driving ability. As a major highlight of the new Forester, X-MODE can be manually activated at speeds below 20km/h, intervening and adjusting the power output, four-wheel drive system, and braking system. The power output of the rear wheels will increase by 25%, delivering excellent performance on steep slopes, rough terrain, and icy roads. OFF button: The OFF button is an intelligent one-touch start function. The start button process is controlled by a chip throughout, ensuring stable and reliable performance, simulating the original car key start mode OFF-ACC-ON-START.
10
0
Share

What is the tire specification for the Mondeo Zhisheng?

The tire specification for the Mondeo Zhisheng is 225/50R17. Tire specification representation methods: There are many ways to represent tire specifications, and the four most common ones in the market are the British system, German system, metric system, and American system. Here is a brief explanation of these four: The British system was adopted by former British colonies, using inches as the unit. For example, 4.00H184PR means a width of 4 inches, suitable for speeds below 210KM/H, with a tire rim diameter of 18 inches and 4-ply strength. Metric tire representation: It provides a more complete description of tire characteristics. Similar to the German system, it omits the "-" low-pressure tire mark and replaces it with an "R" to indicate radial tires. For example, the rear tire of the FZR400 is 140/60R1864H, where the R in R18 indicates that the tire is a radial tire.
10
1
Share

How many days after window tinting can you roll down the windows?

After the car window tinting is completed, avoid rolling down the windows within 3 days in summer and 7 days in winter. Here are some relevant introductions about car window tinting: 1. The reason why windows cannot be rolled down immediately after tinting: The reason is that the glass of a car that has just been tinted is usually very tight. During the process of opening and closing the windows, the edges of the car window film can easily roll up or peel, causing damage to the film. 2. Precautions after car window tinting: Within one week after the car window tinting, when parking the vehicle, choose a place with plenty of sunlight to ensure that the moisture inside the car window film fully evaporates; The micro-water tinting process of V-KOOL car window film, in addition to protecting the car dashboard circuit, can also better ensure the construction effect of the car window film.
15
1
Share

Is the Kia K3 a joint venture car or a domestic car?

Domestically produced Kia cars are joint venture vehicles, not domestic cars. Kia operates as a joint venture brand of Kia Corporation in China. Kia Corporation is the largest automobile manufacturer in South Korea and is currently part of the Hyundai Group. Introduction to Kia Corporation: In 2007, Kia Corporation partnered with one of China's top three automotive groups, Dongfeng Motor Corporation, forming Dongfeng Yueda Kia. This is a standard joint venture, with the partners being Kia Motors Corporation of South Korea and Dongfeng Motor Corporation of China. Kia's popularity: Among the many joint venture automobile enterprises in China, Dongfeng Yueda Kia still has relatively low popularity. Considering all models, the pricing is relatively affordable, and the configurations are superior to other models in the same class.
8
5
Share

What is the actual fuel consumption of the Highlander 3.5?

The average fuel consumption derived from actual driving of the 3.5L model is approximately 13.4L/100km. Since actual fuel consumption is influenced by numerous factors, each driver may experience slight variations, though under normal circumstances, the fluctuation should not be significant. Actual comprehensive fuel consumption is related to multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc., and should be based on actual driving conditions. Methods to reduce fuel consumption: Avoid prolonged engine idling: When the vehicle is idling, the engine consumes significantly more fuel than during normal driving. Therefore, if the vehicle is not in use for an extended period, such as when waiting for someone, it is best to turn off the engine. Avoid sudden braking and acceleration: A smooth and steady driving style is the most fuel-efficient. During the initial acceleration phase, avoid slamming on the accelerator. The correct method is to accelerate smoothly. Once a certain speed is reached, try to maintain a constant speed. When driving in congested areas, pay attention to the road conditions ahead to avoid sudden braking, which not only saves fuel but also extends the vehicle's lifespan. Maintain an appropriate driving speed: Generally, the most fuel-efficient speed is around 88.5 km/h. Fuel consumption increases when the speed rises to 105 km/h.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.