···
Log in / Register

Is an inspection required when the scoring cycle reaches 12 points?

4 Answers
IanMarie
08/26/25 5:10am

An inspection is required when the scoring cycle reaches 12 points. The scoring cycle refers to the cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle), which lasts for 12 months with a maximum of 12 points, calculated from the date the motor vehicle driver's license is initially issued. Regulations related to the driver's license scoring cycle: 1. Study relevant legal knowledge: Motor vehicle drivers must report to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred within 15 days to participate in a seven-day study session on road traffic safety laws, regulations, and related knowledge. After completing the study, the vehicle management office must conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. 2. Pass or fail: If the test is passed, the points will be cleared, and the motor vehicle driver's license will be returned. If the test is failed, the driver must continue to participate in the study and retake the test. Refusal to participate in the study or take the test will result in the traffic management department of the public security authority announcing the suspension of the motor vehicle driver's license. 3. Road driving skills test: If a motor vehicle driver reaches 12 points or more twice in one scoring cycle or accumulates 24 points or more, the vehicle management office must also conduct a road driving skills test within 10 days after the driver passes the test on road traffic safety laws, regulations, and related knowledge. The road driving skills test will be conducted according to the highest vehicle class specified on the driver's license.

Was this review help?
3
4
Share
LondynDella
09/08/25 7:05am

I remember a relative last year who had accumulated 12 penalty points on his license. He had to rush to the DMV for verification and was required to attend a 7-day safety education course. The course content was quite comprehensive, covering traffic signal rules review and analysis of real-life accident cases. He had to spend several hours each day attending lectures, and after completing the course, he had to pass an exam with a score of at least 90 to qualify. If he didn't complete the verification, his driver's license would be suspended, making it impossible to drive—what a hassle! So afterwards, he drove extra carefully, avoiding speeding and running red lights. He also recommended that I use a mobile app to check my points and monitor my progress. The whole process was not only time-consuming but also disrupted work and daily life. Everyone should remember that reaching the annual limit is risky, so it's important to follow the rules carefully to avoid getting points deducted.

Was this review help?
9
5
Share
Expand All
MacGiselle
10/22/25 7:12am

I just got my driver's license half a year ago, so hearing this makes me a bit nervous. After asking around experienced drivers, they all said that once you accumulate 12 penalty points, you definitely have to undergo a review. The main thing is to attend mandatory traffic law education at designated locations, usually lasting about 5 days. The content covers basic knowledge like traffic signal recognition and speed limit regulations. You need to pass an exam after the course to reset your points. If you skip the review, your vehicle will be suspended from operation, which can cause a lot of inconvenience. Now I drive very carefully, promptly handling any violations, and I've also installed a dashcam to assist with reminders. In short, it's advisable for new drivers to learn more about the rules to avoid accumulating high penalty points—safety first is always the golden rule.

Was this review help?
10
4
Share
Expand All
OIsabella
12/05/25 7:36am

Having driven for decades, the rules have changed significantly. In the past, even with full points, it wasn't as strict as it is now. Nowadays, accumulating 12 points means mandatory review, requiring attendance in traffic regulations and driving safety courses for several days followed by an exam. Passing allows continued driving, but the process is time-consuming. I suggest fellow drivers check their point records in advance and cultivate good habits.

Was this review help?
9
0
Share
Expand All
More Forum Discussions

how to secure battery in car

The most effective way to secure a car battery is by using its hold-down clamp or bracket, a metal bar or strap that applies downward pressure to keep the battery from moving. A loose battery is a serious hazard; it can shift during driving, potentially short-circuit on the metal frame causing a fire, or cause acid leaks that damage your engine bay. The securing process is straightforward but requires attention to safety and correct tightness. First, always start with safety. Put on safety glasses and gloves. The battery contains sulfuric acid and can produce explosive gases. Disconnect the negative terminal first (usually marked with a minus sign and a black cable), then the positive terminal. This sequence prevents accidental short circuits if your tool touches the car's metal frame. Locate the hold-down clamp. It typically runs across the top of the battery or hooks into its base and is secured by a single bolt or nut at each end. Use the appropriate socket or wrench to loosen and remove this fastener. You may need to brush away corrosion for clear access. Once the clamp is off, you can inspect the battery tray and the clamp itself for any damage or excessive corrosion. Reinstalling is the reverse. Place the clamp back into position. The key is proper torque . Overtightening the bolt can crack the battery case, leading to leaks and failure. Under-tightening leaves the battery insecure. Most manufacturers recommend a torque specification, but a general rule is to tighten the nut or bolt until it is snug and the battery cannot be wiggled by hand. Reconnect the positive terminal first , then the negative, and ensure both connections are tight. Common Battery Securing Component Torque Specifications Hold-down Bolt/Nut (General Guideline) 70-100 inch-pounds (in-lbs) or 6-8 foot-pounds (ft-lbs) Side-Mount J-Hook 80-120 in-lbs (7-10 ft-lbs) Terminal Connector Bolt 50-80 in-lbs (4-7 ft-lbs) Battery Tray Mounting Bolts 120-180 in-lbs (10-15 ft-lbs) A quick monthly visual check, ensuring the battery doesn't move when you try to rock it, can prevent most problems before they start.
1
1
Share

how to reduce car wind noise

The most effective way to reduce car wind noise is to systematically identify and seal the air leaks causing it. Start by inspecting the door seals , as worn or misaligned weatherstripping is the most common culprit. If a specific door or window is noisy, that's a strong indicator. Other frequent sources include poorly sealed side mirrors, roof racks, and even a slightly open sunroof. For a permanent fix, replacing damaged seals is the best course of action. Wind noise is caused by turbulence , which occurs when air flows unevenly over the vehicle's surface. At highway speeds, even a tiny gap can create a noticeable whistle or roar. The goal is to restore the car's original aerodynamic profile. Here are the primary areas to check and potential fixes: Component to Inspect Common Issue Potential Solution Estimated Cost (Parts Only) Door Weatherstripping Cracks, tears, or loss of elasticity Apply silicone lubricant; if damaged, replace the seal. $50 - $150 per door Window Seals Worn-out felt or rubber guides Replace the window channel run or outer beltline moldings. $30 - $100 per window A-Pillar & Side Mirrors Loose trim or poor mirror design Ensure clips are secure; aftermarket wind deflectors can help. $20 - $80 for deflectors Sunroof Seal Dirt accumulation or misalignment Clean the seal and track; adjust the frame if necessary. $0 (clean) - $300 (adjust) Windshield/Rear Glass Improper installation or seal failure Professional resealing is required; do not attempt DIY. $200 - $500 For a quick, temporary improvement, you can apply a silicone-based protectant to the door seals. This restores pliability and can improve the seal immediately. However, this is a short-term solution. If you have a roof rack, remove it when not in use, as it's a major source of wind drag. If the noise is a high-pitched whistle, try placing a small piece of tape on the suspected gap while driving to identify the source; if the noise stops, you've found your problem.
3
1
Share

how to remove a car radiator

Removing a car radiator is a moderately complex DIY task that requires patience and the right tools. The core procedure involves safely draining the coolant, disconnecting hoses and electrical connectors, unbolting the radiator, and carefully lifting it out. While a skilled home mechanic can handle it, mistakes can lead to cooling system damage or personal injury from hot coolant. Safety First: Never attempt this on a hot engine. Severe burns can occur from pressurized, boiling coolant. Wait until the engine is completely cool to the touch. Wear safety glasses and gloves throughout the process. Essential Tools and Parts: Tools: Socket set with extensions, screwdrivers, pliers, drain pan, funnel. Parts: New radiator (if replacing), new coolant, new hose clamps (recommended). Step-by-Step Removal Process: Depressurize and Drain: Locate the radiator drain plug, usually at the bottom of the radiator on the driver or passenger side. Place a drain pan underneath and slowly open the plug. Catch all the old coolant for proper disposal at an auto parts store or recycling center. Alternatively, you can disconnect the lower radiator hose, but the drain plug is often cleaner. Disconnect Hoses: Once drained, disconnect the upper and lower radiator hoses from the radiator necks. You may need to loosen hose clamps with a screwdriver or pliers. Be prepared for some residual coolant to spill out. Disconnect Electrical Connectors: Modern radiators often have electric cooling fans mounted to them. Unplug the electrical connector for the fan. Some models may also have a transmission cooler integrated; you'll need to disconnect the transmission cooler lines (have a rag ready for fluid seepage). Remove Mounting Bolts: The radiator is secured by brackets at the top and sometimes the bottom. Use your socket set to remove these bolts. Keep them safe. Lift Out the Radiator: With all connections free and bolts removed, the radiator should be loose. Carefully lift it straight up and out of the engine bay. Be mindful of any sharp edges on the radiator or surrounding components. Disposal and Installation: Take your old radiator to a scrap metal yard or auto parts store that accepts them. When installing the new one, use new hose clamps for a reliable seal and always refill with the correct type and mixture of coolant specified in your owner's manual. Common Radiator Types & Replacement Considerations Typical Cost Range (Part Only) Average DIY Time Core Material Common in Vehicle Types Aluminum/Plastic $100 - $400 2-3 hours Aluminum core/plastic tanks Most modern passenger cars All-Aluminum $200 - $800+ 2-4 hours Aluminum Performance cars, trucks, heavy-duty Copper/Brass $150 - $500 2-3 hours Copper/Brass Older classic cars
19
5
Share

how to remove car door panel

Removing a car door panel is a manageable DIY task if you have the right tools and work methodically. The core process involves locating and removing hidden screws, carefully releasing plastic clips holding the panel to the door frame, and disconnecting electrical wiring for components like power windows and door locks before lifting the panel away. Rushing the job is the easiest way to break plastic clips or tear the panel material, so patience is key. Before you start, gather the necessary tools. A trim panel removal tool is highly recommended—it’s a inexpensive forked plastic tool designed to pry clips without damaging the door or panel. You’ll also need a set of screwdrivers (Phillips and flat-head) and a socket set. To keep track of the different fasteners, use a small magnetic tray or a piece of cardboard to poke the screws into, creating a map of their locations. Common Screw Locations Typical Fastener Type Notes Behind the door handle cup Phillips head or Torx Often hidden under a small plastic cap. Along the armrest Phillips head May be under a plastic cover that pops off. Beneath the window switch panel Phillips head The entire switch panel may pry upward. On the side of the door (if applicable) Phillips head Found on some older models. At the bottom edge of the panel Phillips head Less common, but worth checking. Start by manually rolling down the window to prevent accidents. Then, begin your search for screws. They are almost always hidden. Gently pry off any plastic covers with your trim tool. Once all screws are removed, the panel is held on by plastic clips. Insert the trim tool into the seam between the panel and the door metal, working your way around the entire perimeter to pop the clips loose. Never use excessive force. If a section won't budge, re-check for a missed screw. Finally, lift the panel straight up and off the door frame. It will likely still be connected by wiring harnesses for the power window switch, door lock, and speakers. Locate the plastic connectors and press the release tab to disconnect them. Now the panel is completely free. Reverse these steps for reassembly, making sure all clips snap securely into place.
13
1
Share

how to register a leased car

Registering a leased car is primarily the lessee's responsibility (you, the person leasing the car), but the process involves coordination with the leasing company. You'll need the vehicle's title, which is held by the leasing company, and a packet of documents they provide called a title application packet or registration packet . The core steps involve receiving this packet from the leasing company, taking it to your local DMV along with your proof of insurance and identification, and paying the required fees. The leasing company is the legal owner, so you cannot register the car without their direct involvement. The most critical first step is contacting your leasing company immediately after taking delivery of the vehicle. They have a vested interest in ensuring the car is properly registered and insured. Delays can result in late fees or even your temporary tags expiring, leaving you unable to legally drive. The table below outlines the typical documents you'll need to gather. Document/Source Description Why It's Important Title Application Packet Provided by the leasing company. Often includes the Manufacturer's Certificate of Origin (MCO), a power of attorney form, and an odometer statement. This packet legally authorizes the DMV to process the registration in your name as the lessee. Proof of Insurance Your insurance card or policy documents showing the leased vehicle's VIN and meeting your state's minimum coverage. Registration cannot be completed without proof of valid insurance. Smog/Safety Inspection A passed vehicle inspection report, if required by your state for new registrations. Some states mandate an inspection before a vehicle can be registered. Photo ID Your valid driver's license or state ID. To verify your identity and residency. Payment for Fees Funds for registration fees, titling fees, and state/local taxes. These fees are mandatory to complete the transaction. The process can take several weeks. The leasing company handles the paperwork on their end, then mails the necessary documents to you. Once you have everything, you can visit your local DMV office or use their online services if available. Be prepared for potential hiccups, like missing paperwork, which is why starting early is crucial. Remember, you are responsible for getting this done, even though you don't own the car.
16
0
Share

how to receive a donated car

The most effective way to receive a donated car is typically through a recognized charitable organization. These nonprofits facilitate vehicle donations to support individuals and families in need, such as those referred by social service agencies. The process involves verifying your eligibility, which often requires demonstrating financial hardship or a specific need for reliable transportation, and then applying through the charity's official channels. Eligibility is the first hurdle. Charities have specific criteria, usually focusing on low-income families, veterans, domestic violence survivors, or individuals needing a car to get to work or medical appointments. You'll need to provide documentation, which may include proof of income, a referral from a caseworker, and a valid driver's license. Finding a legitimate program is crucial. Look for established 501(c)(3) organizations with transparent processes. Be wary of scams. A reputable charity will not ask for large upfront fees. They often work with partners who repair donated vehicles before awarding them. The tax implications are for the donor, not you. The person donating the car receives the tax deduction, not the recipient. Your responsibility is typically limited to accepting the vehicle, transferring the title, and handling ongoing costs like insurance, registration, and maintenance. Consideration Key Details Common Eligibility Requirements Low-income status, employment verification, referral from a social service agency. Typical Application Process Complete an application form, provide supporting documents, participate in an interview. Recipient's Financial Responsibility Title transfer fees, state sales tax, insurance premiums, and future maintenance. Charity Examples Good News Garage, Vehicles for Change, 1-800-Charity Cars. Timeframe The process can take several weeks to months from application to vehicle placement. Once you receive the car, you must handle the title transfer with your local DMV and secure auto insurance before you can legally drive it. This pathway provides a vital resource for gaining independence, but it requires patience and thoroughness throughout the application process.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.