Is an appointment required for vehicle annual inspection?

1 Answers
DanteRose
07/30/25 5:52am
Vehicle annual inspection does not require an appointment, you can directly go to the vehicle management office to handle it. Making an appointment for the annual inspection can effectively save the owner's valuable time. Vehicle Annual Inspection: Vehicle annual review (Vehicles-examined) is also called vehicle annual inspection, which refers to the annual inspection of motor vehicles. Vehicle annual inspection process: The vehicle annual inspection process refers to the fixed procedure for vehicle inspection conducted annually. Annual Inspection Regulations: If a vehicle is found by traffic police on the road without annual inspection, the owner will be fined or the vehicle will be impounded. At the same time, in the insurance contract, vehicles that have not undergone timely annual inspection are considered unqualified, and no claims will be paid in the event of a car insurance accident.
Was this review help?
4
1
Share
More Forum Discussions

Does the BMW 1 Series have a four-cylinder engine?

Both the BMW 1 Series 120i and 125i are equipped with four-cylinder engines. Specifically, the 120i comes with a 2.0T four-cylinder turbocharged engine, while the 125i features a 1.5T three-cylinder and a 2.0T four-cylinder engine. The 1.5T turbocharged engine delivers 140 horsepower and a maximum torque of 220 Nm. It reaches its maximum power at 4,600 to 6,500 rpm and its peak torque at 1,480 to 4,200 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. The 2.0T four-cylinder turbocharged engine produces a maximum power of 192 horsepower and a peak torque of 280 Nm. It is matched with an 8AT transmission, achieving a top speed of 235 km/h and an official 0-100 km/h acceleration time of 7.5 seconds. The fuel consumption is rated at 6.4L per 100 km according to the Ministry of Industry and Information Technology, and it meets the China VI emission standards. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 7-speed dual-clutch transmission.
14
2
Share

How many seats does the Audi Q7 have?

The Audi Q7 is available in both 5-seat and 7-seat configurations. The Audi Q7 is a mid-to-large-sized SUV. Taking the 2021 Audi Q7 as an example, its body dimensions are: length 5067mm, width 1970mm, height 1731mm, with a wheelbase of 2996mm, a fuel tank capacity of 85 liters, and a curb weight of 2115kg. The 2021 Audi Q7 features multi-link independent suspension both in the front and rear, and is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 245PS, a maximum power of 180kW, and a maximum torque of 370Nm, paired with an 8-speed automatic transmission.
10
1
Share

What to Do If the Car Air Conditioning Drainage Port is Clogged?

Solutions for a clogged car air conditioning drainage port are: 1. Turn off the power; 2. Use a Phillips screwdriver to remove the front panel and partition, exposing the condenser and drainage tray; 3. Fill a mineral water bottle with water and flush the drainage pipe along the tray to unclog it; 4. Use thin iron wire to slowly unclog and remove the blockage; 5. Rinse with water until the drainage is smooth; 6. Reinstall the partition and panel in the reverse order of removal. Car air conditioning maintenance methods: 1. Regularly check the refrigerant and compressor oil, ensuring the low-pressure side of the system is between 2 to 3 bar and the high-pressure side between 15 to 25 bar; 2. Clean the condenser surface, as cooling efficiency is related to the cleanliness of the condenser fins. Dirt, insects, or debris on the condenser surface can reduce heat dissipation efficiency and affect cooling performance, increasing pressure and heat within the system, which severely impacts compressor components; 3. Clean the evaporator surface.
7
0
Share

What Does Brake Pad Wear Mean?

Brake pad wear refers to the gradual wearing down of the friction blocks on a car's brake pads due to frequent braking during use. As a result, the braking effectiveness diminishes over time. If not replaced promptly, it can lead to a complete loss of braking performance, compromising driving safety. Steps to replace brake pads: 1. Open the engine compartment and check the brake fluid level to prevent overflow during replacement. 2. Remove the wheel where the brake is located. 3. Unscrew the bolts of the brake caliper and take out the old brake pads. 4. Install new brake pads, tighten the guide bolts, and complete the replacement. Brake pad materials include: 1. Asbestos, cellulose, sintered glass. 2. Carbon fiber friction materials. 3. Powder metallurgy friction materials. 4. Semi-metallic friction materials.
6
4
Share

What are the symptoms of a stuck intake solenoid valve?

The symptoms of a stuck intake solenoid valve include: 1. Abnormal engine operation or insufficient power; 2. Uneven engine operation at high, medium, and low speeds accompanied by rhythmic shaking; 3. Black smoke emission from the muffler along with backfiring; 4. Engine misfiring (cylinder failure); 5. Inability to accelerate the vehicle and increased driving noise. A solenoid valve is an electromagnetic-controlled industrial device used as an automated basic component for fluid control, belonging to the actuator category. It can be paired with different circuits to achieve desired control, ensuring precision and flexibility. Solenoid valves can be classified into: 1. Direct-acting solenoid valves; 2. Step-by-step direct-acting solenoid valves; 3. Pilot-operated solenoid valves.
16
1
Share

What kind of oil should be used for the Ford Kuga 1.5T?

5W-20 oil is suitable for the Ford Kuga 1.5T. The "W" stands for winter, and the smaller the number before it, the better the low-temperature fluidity of the oil, indicating a lower usable environmental temperature and better protection for the engine during cold starts. Here are some details about the Ford Kuga: The 1.5T engine utilizes turbocharging technology. The intake air temperature after being drawn in by the turbo is relatively high, which can reduce engine efficiency. Therefore, the intake air needs to be cooled. The Ford 1.5T engine uses a water-cooled intercooler integrated into the intake manifold. Ford has equipped the 1.5T engine with a dual variable valve timing system (dual VVT), which can adjust the valve timing on both the intake and exhaust sides. This allows precise control of valve opening and closing times based on the vehicle's operating conditions, improving fuel economy. The 1.5T EcoBoost engine delivers power output levels comparable to a 1.6T engine while also enhancing fuel efficiency. Effects of mixing different oils: Since different brands and types of oils contain different chemical additives, mixing them can lead to chemical reactions that reduce lubrication effectiveness. It may also produce acidic or alkaline compounds, accelerating corrosion of engine components.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.