Is an annual inspection required for a B2 license without demerit points?

1 Answers
AbigailMarie
07/29/25 12:52pm
b2 without demerit points does not require an annual inspection. The B2 driver's license implements an annual review, which must be completed within 30 days after the end of the current scoring cycle at the vehicle management office in the issuing location. However, if there is no record of accumulated demerit points during the current scoring cycle, the review for that cycle can be exempted. If there are no demerit points at all, no review is needed until the license is renewed upon expiration. For the B2 driver's license annual review, a health examination form must be submitted to the vehicle management office within 15 days after the initial issuance each year. Otherwise, if it is not submitted for over a year, the license will be automatically canceled by the vehicle management office. The B2 driver's license annual review process includes: 1. Providing a 1-inch white background photo; 2. Undergoing a health examination at a designated driver's medical facility, covering items such as vision, hearing, color discrimination, height, and limbs; 3. Submitting the health examination form at the traffic police office and receiving a receipt.
Was this review help?
14
4
Share
More Forum Discussions

Is the Macan's Transmission a PDK?

Macan's transmission can be referred to as a PDK transmission, having undergone special tuning and calibration by Porsche. The full name of the PDK transmission is Porsche-Doppelkupplung, or Porsche Double-Clutch Transmission, which is essentially a brand name. All dual-clutch transmissions produced by Porsche can be called PDK transmissions. More details are as follows: 1. In fact, the dual-clutch transmission in the Porsche Macan is not a true PDK transmission; this vehicle uses Audi's dual-clutch transmission. The Porsche Macan shares the same platform as the Audi Q5, so it's quite normal for it to use Audi's dual-clutch transmission. 2. Porsche's PDK transmission is highly stable, with excellent reliability and durability. Tests have shown that even after 50 consecutive launch starts, the PDK transmission does not exhibit any overheating warnings or malfunctions.
5
0
Share

Is the turn signal down for left or right turn?

Turning the signal lever downward activates the left turn signal. Drivers can simply imagine the turn signal lever as a steering wheel—the direction you turn it corresponds to the intended turn direction. The standard configuration follows the "down-right, up-left" convention, where downward movement (counterclockwise) is generally interpreted as a left turn, while upward movement (clockwise) indicates a right turn. According to Articles 57.1 and 57.2 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: • When making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal must be activated in advance. • When making a right turn, changing lanes to the right, returning to the original lane after overtaking, or pulling over to the roadside, the right turn signal must be activated in advance. Turn signals are critical indicators that alert surrounding vehicles and pedestrians when a motor vehicle changes direction. These lights use xenon tubes and microcontroller-regulated circuits to produce alternating high-frequency flashes. A flasher relay controls the blinking operation. As signal lights, turn signals primarily serve to notify nearby vehicles of intended directional changes, prompting them to yield and avoid collisions. Activating turn signals in advance whenever leaving the current lane is a fundamental principle of safe driving.
5
0
Share

What is the ground clearance of the Lamando?

The ground clearance of the Lamando is 114mm. The ground clearance of the Lamando refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the vehicle is fully loaded and stationary, which is used to characterize the car's ability to pass over obstacles without collision. Relevant details are as follows: 1. The length, width, and height of the Lamando are 4615mm, 1826mm, and 1425mm respectively, with a wheelbase of 2656mm, a fuel tank capacity of 51L, and a trunk capacity of 480L. 2. The Lamando features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm.
16
1
Share

How to Remove the Hood Ornament from a Mercedes-Benz?

To remove the hood ornament from a Mercedes-Benz, open the engine hood and use pliers to rotate the fixing clip of the ornament by 90 degrees to detach it. Relevant information is as follows: 1. Mercedes-Benz models include the A-Class, S-Class, GLS, CLA, and Maybach S-Class. 2. The Mercedes-Benz CLA200 is a compact car with body dimensions of 4692mm in length, 1830mm in width, 1422mm in height, and a wheelbase of 2729mm. 3. The Mercedes-Benz CLA200 is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 163ps, a maximum power of 120kw, and a maximum torque of 250nm.
12
0
Share

Where is the air conditioning filter of the Touareg located?

The air conditioning filter of the Touareg is located behind the glove box. The steps to replace the Touareg's air conditioning filter are: 1. Open the glove box. Near the top left of the glove box, there is a knob that adjusts the entry of cold air from the air conditioning into the glove box. To the left of this knob, there is a latch that can be flipped upwards. Behind this latch is the glove box's limit latch. After flipping it upwards, the glove box will open outward, revealing the air conditioning filter location behind it. 2. Remove the air conditioning filter cover. Use a flat tool like a flathead screwdriver or a plastic pry bar to pry open the blue parts inside the three support feet. Once all three parts are pried open, they will be in an upward-opening state, allowing you to lift the cover upwards and remove it. 3. Replace the filter. Opening the cover will reveal the filter, which can be pulled out parallelly and outward. Insert the new air conditioning filter by pushing it in the direction of the airflow arrow pointing downward.
19
0
Share

What does the name 'Yize' mean?

From a literal perspective, it means bringing vitality to young people and adding colorful details to their lives, hoping that this car can bring a different life to young people in their monotonous daily routines. The Yize is also a youth-oriented SUV under the Toyota brand. More details are as follows: 1. The Yize is a mid-range SUV model in Toyota's lineup. Its launch signifies Toyota's entry into the competition for young SUV models. 2. Toyota is a Japanese car brand, and in the Chinese automotive market, it enjoys a good reputation among domestic consumers. High quality and low fuel consumption are the common praises from consumers. Many Toyota car owners value its high reliability. 3. With the official launch of the Yize, besides its comfort and strong operability, it has set a new benchmark for young SUV models in China and has inherited Toyota's characteristic of high reliability.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.