Is adding fuel additive harmful to the car?

1 Answers
StAurora
07/30/25 2:48am
Adding qualified fuel additive is not harmful to the car. Here are the specific details about fuel additives: 1. Adding method: Add the fuel additive first, then add gasoline. This allows the initially added fuel additive to be fully and evenly mixed under the impact of gasoline filling, achieving the optimal usage effect. 2. Function: Fuel additive, also known as fuel system cleaner, mainly serves to clean carbon deposits, maintain the engine, and fuel lines. Some special-purpose fuel additives can also improve the anti-knock property (octane number) of the fuel. Since fuel additives are mainly composed of more than ten components such as nano-molecules, cleaning activation factors, anti-oxidation, anti-corrosion, and demulsification, they are developed to target harmful components in the fuel such as sulfur, gum substances, and engine carbon deposits, thereby achieving effects such as enhancing power, promoting combustion, anti-oxidation, anti-wear, cleaning, dispersing, demulsification, anti-corrosion, and lubrication.
Was this review help?
18
3
Share
More Forum Discussions

Will the sunroof drainage holes get clogged if not opened?

Sunroof drainage holes may get clogged if not opened. Here is some extended information: 1. Location: The sunroof drainage holes in a car are usually located inside the A-pillars and C-pillars of the vehicle. There is a round rubber plug, with one on each side of the rear longitudinal beams, similar to the front. When water enters the sunroof channel, it flows toward the drainage holes and then exits the vehicle through the drainage pipes. 2. Hazards: If the sunroof drainage pipes are clogged, water may flow into the interior, causing water leakage inside the cabin. Once the drainage holes are blocked, issues like water leakage and seepage may occur inside the vehicle, potentially damaging the interior panels in minor cases or leading to mechanical component and engine circuit system damage in severe cases. Therefore, it is essential to keep the sunroof drainage pipes clear and perform regular maintenance on the sunroof.
11
5
Share

What brand is the transmission of the Roewe iMAX8?

"The transmission brand of the Roewe iMAX8 is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the world's highest market share in the automotive automatic transmission sector. The Roewe iMAX8 is equipped with an Aisin 8AT automatic manual transmission. The automatic manual transmission essentially adds manual shifting functionality to traditional AT or CVT transmissions, aiming to enhance the driving pleasure of automatic vehicles. When using the transmission of the Roewe iMAX8 in daily operations, pay attention to the following points: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and produce a certain impact when shifting back into D gear. Never shift into D/R gear before the vehicle comes to a complete stop. Many drivers, aiming to demonstrate smooth operation, shift directly into reverse before the vehicle stops, which can significantly harm the internal gears of the transmission and lead to gear grinding faults over time. Do not frequently use D gear to climb steep slopes. On steep inclines, automatic transmission vehicles may overheat due to high load or prematurely upshift, resulting in insufficient climbing power. In such cases, use manual mode to limit low gears or sport mode to protect the transmission. Do not tow over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while in N gear, rather than using a tow rope or directly towing the vehicle."
6
1
Share

What is the main cause of severe wear on the inner side of tires?

The main cause of severe wear on the inner side of tires could be related to wheel alignment, and over-inflation of tires can also lead to inner side wear. More related information is as follows: 1. Wheel alignment issues: Generally related to four factors: front wheel toe-in, camber angle, kingpin inclination angle, and caster angle. 2. Tire pressure issues: Excessive pressure in a tire can accelerate wear on the center of the tread, while insufficient pressure can cause the tire to bow inward, accelerating wear on the outer side of the tread. Additionally, differing pressures in left and right tires can cause the tire with lower pressure to wear more. 3. Regular tire rotation: Ensures even tire wear. Perform wheel alignment every 5,000 to 10,000 kilometers to avoid abnormal severe tire wear. Tires installed on the same axle should not be of different models or have significant differences in wear.
16
0
Share

Is the Odyssey exempt from inspection for 6 years?

The Odyssey is not exempt from inspection for 6 years, as it is a 7-seater vehicle and thus not within the scope of exemption. Introduction to the Odyssey: The Odyssey is a vehicle launched by Honda, which was released nationwide in January 2007. It is equipped with a satellite navigation system, featuring an 8-inch large display screen and voice guidance function, powered by a high-performance 2.4L i-VTEC engine with variable valve timing and lift. Odyssey Interior: The hybrid version of the Odyssey maintains consistency with the current fuel version, overall adhering to a homey and warm style. If any differences must be pointed out, it would be that the multimedia screen size has been upgraded to 8 inches in the new model, compared to the 7 inches in the current version.
12
3
Share

What to Do If It Rains Right After Applying a Color Change Film?

Immediately cover the vehicle to protect it from rain, as a car with a freshly applied color change film should not be exposed to water. Here are detailed instructions: 1. Precautions after applying the film: Avoid washing the car within the first three days after application to prevent the film from peeling due to moisture. Also, refrain from using the rear window defroster for a week, as moisture can negatively affect the defroster lines. After installation, you can gently clean the film surface with a wet towel, sponge, or soft cloth. Additionally, you may notice a foggy appearance caused by water vapor under the film—this is a normal part of the drying process and will gradually disappear. 2. Choosing a color change film: (1) Select based on color: High-quality films have rich, uniform colors, while inferior films exhibit uneven coloring and a grainy texture. (2) Select based on texture: The thickness and toughness of the backing paper are indicators of film quality. High-quality films are smooth, appropriately thick, and resistant to creasing; inferior films feel rough, lack flexibility, and retain creases.
16
2
Share

What are the differences between the S60 and S90?

Here are the specific details about the differences between the S60 and S90: In terms of vehicle model and body dimensions: The S60 is a mid-size sedan equipped with a 2.0-liter gasoline engine. Its body dimensions are 4761 mm in length, 1850 mm in width, 1437 mm in height, with a wheelbase of 2875 mm. The S90 is a full-size sedan equipped with a 2.0-liter gasoline engine paired with a 48V mild hybrid system. Its body dimensions are 4090 mm in length, 1879 mm in width, 1450 mm in height, with a wheelbase of 3061 mm. In terms of engines: The Volvo S60 is powered by a 2.0T turbocharged engine, producing a maximum horsepower of 163, a maximum power of 120 kW, a maximum torque of 265 Nm, and uses 92-octane gasoline. The S90 is powered by a 2.0T turbocharged engine, producing a maximum horsepower of 250, a maximum power of 184 kW, a maximum torque of 350 Nm, and uses 95-octane gasoline.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.