Is ABS Tire Pressure Monitoring Safe?

2 Answers
IkerAnn
07/29/25 12:23pm
ABS tire pressure monitoring is referred to as a passive tire pressure monitoring system, which provides significant assistance to driving safety. The understanding of the ABS system can be summarized in the following two aspects: 1. How ABS tire pressure monitoring works: ABS tire pressure monitoring compares the rotational speed differences between tires using the wheel speed sensors of the car's ABS system to achieve the purpose of monitoring tire pressure. ABS uses wheel speed sensors to determine whether a wheel is locked, thereby deciding whether to activate the anti-lock braking system. When tire pressure decreases, the vehicle's weight causes the tire diameter to shrink, leading to changes in vehicle speed. These changes can be used to trigger an alarm system to warn the driver. 2. Classification of tire pressure monitoring: Tire pressure monitoring systems can be divided into two types: one is an indirect tire pressure monitoring system, which determines whether a tire is abnormal by the difference in rotational speed between tires; the other is a direct tire pressure monitoring system, which involves installing four tire pressure monitoring sensors inside the tires to automatically and real-time monitor tire pressure and temperature while the car is stationary or in motion. It also provides timely alerts for high pressure, low pressure, and high temperature in tires to avoid traffic accidents caused by tire failures, ensuring driving safety.
Was this review help?
10
0
Share
AylaFitz
08/13/25 11:22pm
As an average driver with nearly a decade of experience, the ABS-based tire pressure monitoring system in my car has genuinely helped me avoid many troubles. This system detects tire pressure issues by analyzing speed differences via brake sensors, triggering a warning light when pressure drops so I can promptly get it checked. Once on the highway, its alert led me to refill air at a service station, preventing a potential blowout. Though it doesn’t directly measure pressure and may respond slower in scenarios like crawling traffic or sharp turns, overall it’s reliable—preventing loss of control or blowouts due to leaks. For safety, I consider it indispensable. While less precise than advanced systems, paired with my pre-drive visual checks, it significantly boosts safety. I’ve noticed occasional false alarms on extreme surfaces like muddy roads, but this doesn’t undermine its daily protective value. Regular maintenance plus this system makes driving far more reassuring.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

How to unlock the v16 engine in a manual transmission parking lot?

At this time, you only need to use the key to unlock it. Generally, aftermarket keys do not have very good recognition. Simply disconnect the power for 10 seconds and then reconnect it. Then, disconnect the negative terminal of the battery for a while, wait for the engine's protection data to be cleared, and then reconnect the battery. If the engine is locked due to a collision causing it to sink, you will definitely need to repair the car. Once repaired, the lock will naturally be released. If the lock is caused by replacing a system-certified component with a non-system-certified one, it is recommended to go to a 4S store or a qualified repair shop for unlocking.
10
4
Share

What is the correct method for starting a manual transmission car on a slope?

After driving onto an uphill slope, beginners must engage the handbrake and shift into neutral. A few seconds before the traffic light is about to turn green, depress the clutch and shift into first gear. Place your right hand on the handbrake. After confirming that the car in front has started moving, slowly release the clutch a little. Never release the handbrake before partially releasing the clutch. Hold the clutch at a certain position after releasing it slightly—do not release it too much, as this can easily cause the engine to stall. When you feel the car has forward momentum, slowly release the handbrake. Gently press the accelerator with your right foot, using an intermittent throttle technique at this stage.
17
0
Share

Is it mandatory for Honda vehicles to undergo maintenance every 5,000 kilometers?

Honda vehicles are not strictly required to undergo maintenance every 5,000 kilometers. However, 5,000 kilometers or 6 months is considered the optimal maintenance interval for Honda cars. Below is detailed information about automotive maintenance: Overview: Automotive maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as vehicle upkeep. Currently, automotive maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance scopes. Purpose: The goal of automotive maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent malfunctions, slow down the deterioration process, and extend the service life.
2
3
Share

What to Do If You Forget Which Gear You're in with a Manual Transmission Car?

First, memorize the position of each gear. You can tell which gear you're currently in by feeling the position of the gear lever with your hand. Never develop the habit of looking down at the gear lever. This habit is extremely dangerous and severely compromises driving safety. Shift gears promptly, correctly, smoothly, and swiftly. When starting the car, generally use a low gear. After starting, quickly and timely shift up to higher gears. Under normal circumstances, it is not allowed to forcibly shift into a lower gear when the vehicle speed is high. This should only be done in very special situations, such as when it's not advisable to use the brake on icy or snowy roads.
1
2
Share

How to Adjust Manual Rearview Mirrors?

Use a flexible plastic card to insert into the gap of the rearview mirror panel; forcefully pry open the clip at the indicated location. Note that there are four symmetrical clips—top, bottom, left, and right. Pry both top clips slightly to create a small gap, then use your left hand to assist in wiggling and pulling the panel outward to remove it. Disconnect the male plug from the panel; be careful not to pull the wires—press the plastic latch on the plug instead. Insert the male plug of the module into the female slot on the switch panel; then, use the original male plug (the one just removed) to insert into the female slot of the module.
15
1
Share

What Can Be Added to the Low-Configuration Version of Santana?

The low-configuration version of Santana can be equipped with features such as an audio system, cruise control, remote key, and trip computer. Below is a detailed introduction about the Santana car: Overview: The Volkswagen Santana (SANTANA) is a sedan, a brand car produced by the German Volkswagen company in California, USA. The standard Santana sedan can be seen nationwide. Currently, there are models such as Santana, Santana 2000, and Santana 3000. Others: The wheelbase is 2548mm. The vehicle dimensions are 4546mm x 1710mm x 1427mm. The trunk volume is 442L. The fuel consumption is 8.5L/100km. The engine type is a 1.8L 95hp L4. The standard seating capacity is 5. The top speed is 165km/h. The acceleration time is 12.9 seconds. The drive type is front-wheel drive.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.